Adding upstream version 1:7.2+dfsg.upstream/1%7.2+dfsgupstream

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>

1 files changed, 217 insertions, 0 deletions

diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
new file mode 100644
index 00000000..2a76b4e0
--- /dev/null
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -0,0 +1,217 @@
+/*
+ * QEMU sPAPR PCI host for VFIO
+ *
+ * Copyright (c) 2011-2014 Alexey Kardashevskiy, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License,
+ *  or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include <linux/vfio.h>
+#include "hw/ppc/spapr.h"
+#include "hw/pci-host/spapr.h"
+#include "hw/pci/msix.h"
+#include "hw/vfio/vfio.h"
+#include "qemu/error-report.h"
+
+bool spapr_phb_eeh_available(SpaprPhbState *sphb)
+{
+    return vfio_eeh_as_ok(&sphb->iommu_as);
+}
+
+static void spapr_phb_vfio_eeh_reenable(SpaprPhbState *sphb)
+{
+    vfio_eeh_as_op(&sphb->iommu_as, VFIO_EEH_PE_ENABLE);
+}
+
+void spapr_phb_vfio_reset(DeviceState *qdev)
+{
+    /*
+     * The PE might be in frozen state. To reenable the EEH
+     * functionality on it will clean the frozen state, which
+     * ensures that the contained PCI devices will work properly
+     * after reboot.
+     */
+    spapr_phb_vfio_eeh_reenable(SPAPR_PCI_HOST_BRIDGE(qdev));
+}
+
+static void spapr_eeh_pci_find_device(PCIBus *bus, PCIDevice *pdev,
+                                      void *opaque)
+{
+    bool *found = opaque;
+
+    if (object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
+        *found = true;
+    }
+}
+
+int spapr_phb_vfio_eeh_set_option(SpaprPhbState *sphb,
+                                  unsigned int addr, int option)
+{
+    uint32_t op;
+    int ret;
+
+    switch (option) {
+    case RTAS_EEH_DISABLE:
+        op = VFIO_EEH_PE_DISABLE;
+        break;
+    case RTAS_EEH_ENABLE: {
+        PCIHostState *phb;
+        bool found = false;
+
+        /*
+         * The EEH functionality is enabled per sphb level instead of
+         * per PCI device. We have already identified this specific sphb
+         * based on buid passed as argument to ibm,set-eeh-option rtas
+         * call. Now we just need to check the validity of the PCI
+         * pass-through devices (vfio-pci) under this sphb bus.
+         * We have already validated that all the devices under this sphb
+         * are from same iommu group (within same PE) before comming here.
+         *
+         * Prior to linux commit 98ba956f6a389 ("powerpc/pseries/eeh:
+         * Rework device EEH PE determination") kernel would call
+         * eeh-set-option for each device in the PE using the device's
+         * config_address as the argument rather than the PE address.
+         * Hence if we check validity of supplied config_addr whether
+         * it matches to this PHB will cause issues with older kernel
+         * versions v5.9 and older. If we return an error from
+         * eeh-set-option when the argument isn't a valid PE address
+         * then older kernels (v5.9 and older) will interpret that as
+         * EEH not being supported.
+         */
+        phb = PCI_HOST_BRIDGE(sphb);
+        pci_for_each_device(phb->bus, (addr >> 16) & 0xFF,
+                            spapr_eeh_pci_find_device, &found);
+
+        if (!found) {
+            return RTAS_OUT_PARAM_ERROR;
+        }
+
+        op = VFIO_EEH_PE_ENABLE;
+        break;
+    }
+    case RTAS_EEH_THAW_IO:
+        op = VFIO_EEH_PE_UNFREEZE_IO;
+        break;
+    case RTAS_EEH_THAW_DMA:
+        op = VFIO_EEH_PE_UNFREEZE_DMA;
+        break;
+    default:
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    ret = vfio_eeh_as_op(&sphb->iommu_as, op);
+    if (ret < 0) {
+        return RTAS_OUT_HW_ERROR;
+    }
+
+    return RTAS_OUT_SUCCESS;
+}
+
+int spapr_phb_vfio_eeh_get_state(SpaprPhbState *sphb, int *state)
+{
+    int ret;
+
+    ret = vfio_eeh_as_op(&sphb->iommu_as, VFIO_EEH_PE_GET_STATE);
+    if (ret < 0) {
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    *state = ret;
+    return RTAS_OUT_SUCCESS;
+}
+
+static void spapr_phb_vfio_eeh_clear_dev_msix(PCIBus *bus,
+                                              PCIDevice *pdev,
+                                              void *opaque)
+{
+    /* Check if the device is VFIO PCI device */
+    if (!object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
+        return;
+    }
+
+    /*
+     * The MSIx table will be cleaned out by reset. We need
+     * disable it so that it can be reenabled properly. Also,
+     * the cached MSIx table should be cleared as it's not
+     * reflecting the contents in hardware.
+     */
+    if (msix_enabled(pdev)) {
+        uint16_t flags;
+
+        flags = pci_host_config_read_common(pdev,
+                                            pdev->msix_cap + PCI_MSIX_FLAGS,
+                                            pci_config_size(pdev), 2);
+        flags &= ~PCI_MSIX_FLAGS_ENABLE;
+        pci_host_config_write_common(pdev,
+                                     pdev->msix_cap + PCI_MSIX_FLAGS,
+                                     pci_config_size(pdev), flags, 2);
+    }
+
+    msix_reset(pdev);
+}
+
+static void spapr_phb_vfio_eeh_clear_bus_msix(PCIBus *bus, void *opaque)
+{
+       pci_for_each_device_under_bus(bus, spapr_phb_vfio_eeh_clear_dev_msix,
+                                     NULL);
+}
+
+static void spapr_phb_vfio_eeh_pre_reset(SpaprPhbState *sphb)
+{
+       PCIHostState *phb = PCI_HOST_BRIDGE(sphb);
+
+       pci_for_each_bus(phb->bus, spapr_phb_vfio_eeh_clear_bus_msix, NULL);
+}
+
+int spapr_phb_vfio_eeh_reset(SpaprPhbState *sphb, int option)
+{
+    uint32_t op;
+    int ret;
+
+    switch (option) {
+    case RTAS_SLOT_RESET_DEACTIVATE:
+        op = VFIO_EEH_PE_RESET_DEACTIVATE;
+        break;
+    case RTAS_SLOT_RESET_HOT:
+        spapr_phb_vfio_eeh_pre_reset(sphb);
+        op = VFIO_EEH_PE_RESET_HOT;
+        break;
+    case RTAS_SLOT_RESET_FUNDAMENTAL:
+        spapr_phb_vfio_eeh_pre_reset(sphb);
+        op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
+        break;
+    default:
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    ret = vfio_eeh_as_op(&sphb->iommu_as, op);
+    if (ret < 0) {
+        return RTAS_OUT_HW_ERROR;
+    }
+
+    return RTAS_OUT_SUCCESS;
+}
+
+int spapr_phb_vfio_eeh_configure(SpaprPhbState *sphb)
+{
+    int ret;
+
+    ret = vfio_eeh_as_op(&sphb->iommu_as, VFIO_EEH_PE_CONFIGURE);
+    if (ret < 0) {
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    return RTAS_OUT_SUCCESS;
+}