path: root/mysql-test/suite/rpl/t/rpl_parallel_optimistic_until.test

--source include/have_innodb.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc
--source include/master-slave.inc
# Format is restricted because the test expects a specific result of
# relay-logging that splits a transaction into two different files.
--source include/have_binlog_format_row.inc

#
# MDEV-15152 Optimistic parallel slave doesn't cope well with START SLAVE UNTIL
#
--connection slave
--source include/stop_slave.inc
RESET MASTER;
RESET SLAVE;

--connection master
RESET MASTER;
CREATE TABLE t1 (a int primary key, b text) ENGINE=InnoDB;
--let $a0 = 25
--eval INSERT INTO t1 SET a=$a0, b='trx0'
# Memorize the position for replication restart from it
--let $pos_trx0 = query_get_value(SHOW MASTER STATUS, Position, 1)

--connection slave
--source include/start_slave.inc

--connection master
# --connection slave
--sync_slave_with_master
--source include/stop_slave.inc
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=2;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
SET GLOBAL slave_parallel_mode='optimistic';

# Run the slave in the following modes one by one.
#
# 1. the until position is set in the middle of trx2
#    below $pos_trx0 of the last exec position in the first file
# 2. and above $pos_trx0
#    In either case trx2 must commit before slave stops.
# 3. the until postion is inside trx1
# 4. RELAY log until inside trx1
# 5. RELAY log until inside a "big" trx
# 6. RELAY log until inside a trx within a sequence of relay logs
#
# Execution flaw for Until_Master_Pos cases follows as:
# create the transaction trx1, trx2
# logged at the beginning of two subsequent binlog files.
# Set the until position to at the middle of the 2rd transaction.
# Engage the optimistic scheduler while having trx1 execution blocked.
# Lift the block after trx2 has reached waiting its order to commit.
# *Proof 1*
#  Observe that the slave applier stops at a correct position.
#   In the bug condition it would stop prematurely having the stop position
#   in the first file, therefore trx2 not committed.
# Specifically, an internal transaction position until makes the applier to run
# beyond it to commit commit the current transaction.
# *Proof 2*
# Observe the following START SLAVE resumes OK.
#
# Auxiliary third trx3 on master is just for triggering the actual stop
# (whihc is a legacy UNTIL's property).
# trx0 is to produce a specific value of the last executed binlog file:pos
# to emulate the bug condition.
#
# Intermediate checks via SELECT are supposed to succeed
# with putting out value 1.
#
# NOTE: Relay log until tests have to use explicit log names and position
# which may require to adjust with future changes to event formats etc.
#

--connection slave
SET @old_max_relay_log_size = @@global.max_relay_log_size;
SET @@global.max_relay_log_size=4096;

--connection master
# trx1
--let $a=1
BEGIN;
while (`SELECT $a < $a0`)
{
  --eval INSERT INTO t1 SET a=$a, b='trx1'
--inc $a
}
COMMIT;
--let $fil_1    = query_get_value(SHOW MASTER STATUS, File, 1)
--let $pos_trx1 = query_get_value(SHOW MASTER STATUS, Position, 1)

FLUSH LOGS;

# $pos_0 the offset of the first event of trx2 in new file
--let $pos_0=query_get_value(SHOW MASTER STATUS, Position, 1)
# trx2
--let $a=$a0
BEGIN;
--eval UPDATE t1 SET b='trx2_0' WHERE a = $a
--eval UPDATE t1 SET b='trx2' WHERE a = $a
COMMIT;
--let $fil_2=query_get_value(SHOW MASTER STATUS, File, 1)
--let $pos_trx2=query_get_value(SHOW MASTER STATUS, Position, 1)

# trx3
--let $a=$a0
--inc $a
--eval INSERT INTO t1 SET a=$a,b='trx3'
--let $pos_trx3=query_get_value(SHOW MASTER STATUS, Position, 1)
--let $a=


--echo *** case 1 UNTIL inside trx2

--connection slave1
# Blocker to hold off EXEC_MASTER_LOG_POS advance
BEGIN;
  --eval INSERT INTO t1 SET a= 1
--connection slave
--let $pos_until=`SELECT $pos_trx0 - 1`
--replace_result $pos_0 <pos_0> $pos_until <pos_until> $pos_trx2 <pos_trx2>
--eval SELECT $pos_0 <= $pos_until AND $pos_until < $pos_trx2 as "pos_until < trx0 and is within trx2"
CHANGE MASTER TO MASTER_USE_GTID=no;
--replace_result $fil_2 file_2 $pos_until <pos_until>
--eval START SLAVE UNTIL MASTER_LOG_FILE = '$fil_2', MASTER_LOG_POS = $pos_until

--let $wait_condition= SELECT COUNT(*) > 0 FROM information_schema.processlist WHERE state = "Waiting for prior transaction to commit"
--source include/wait_condition.inc

--connection slave1
# unblock to see the slave applier stops at $until
ROLLBACK;

--echo Proof 1: Correct stop
--connection slave
--source include/wait_for_slave_sql_to_stop.inc
--let $file_stop= query_get_value(SHOW SLAVE STATUS, Relay_Master_Log_File, 1)
--let $pos_stop=  query_get_value(SHOW SLAVE STATUS, Exec_Master_Log_Pos, 1)
if (`SELECT "$file_stop" != "$fil_2" OR $pos_stop < $pos_until`)
{
  --echo *** ERROR: Slave stopped at $file_stop:$pos_stop which is not $fil_2:$pos_until.
  --die
}
--eval SELECT count(*) = 1 as 'trx2 is committed' FROM t1 WHERE b = 'trx2'
--eval SELECT count(*) = 0 as 'trx3 is not committed' FROM t1 WHERE b = 'trx3'

--echo Proof 2: Resume works out
--source include/start_slave.inc
--connection master
--sync_slave_with_master


--echo *** case 2 UNTIL inside trx2

--connection slave
--eval DELETE FROM t1 WHERE a <> $a0
--eval UPDATE t1 SET b='trx0' WHERE a = $a0

--connection slave1
# Blocker to hold off EXEC_MASTER_LOG_POS advance
BEGIN;
  --eval INSERT INTO t1 SET a= 1

--connection slave
--source include/stop_slave.inc

--let $pos_until=`SELECT $pos_trx2 - 1`
--replace_result $pos_trx0 <pos_0> $pos_until <pos_until> $pos_trx2 <pos_trx2>
--eval SELECT $pos_trx0 <= $pos_until AND $pos_until < $pos_trx2 as "pos_until >= trx0 and is within trx2"
--replace_result $fil_1 file_1 $pos_trx0 <pos_trx0>
--eval CHANGE MASTER TO MASTER_LOG_FILE = '$fil_1', MASTER_LOG_POS = $pos_trx0, MASTER_USE_GTID=no
--replace_result  $fil_2 file_2 $pos_until <pos_until>
--eval START SLAVE UNTIL MASTER_LOG_FILE = '$fil_2', MASTER_LOG_POS = $pos_until

--let $wait_condition= SELECT COUNT(*) > 0 FROM information_schema.processlist WHERE state = "Waiting for prior transaction to commit"
--source include/wait_condition.inc

--connection slave1
# unblock to see the slave applier stops at $until
ROLLBACK;

--echo Proof 1: Correct stop
--connection slave
--source include/wait_for_slave_sql_to_stop.inc
--let $file_stop= query_get_value(SHOW SLAVE STATUS, Relay_Master_Log_File, 1)
--let $pos_stop=  query_get_value(SHOW SLAVE STATUS, Exec_Master_Log_Pos, 1)
if (`SELECT "$file_stop" != "$fil_2" OR $pos_stop < $pos_until`)
{
  --echo *** ERROR: Slave stopped at $file_stop:$pos_stop which is not $fil_2:$pos_until.
  --die
}
--eval SELECT count(*) = 1 as 'trx2 is committed' FROM t1 WHERE b = 'trx2'
--eval SELECT count(*) = 0 as 'trx3 is not committed' FROM t1 WHERE b = 'trx3'

--echo Proof 2: Resume works out
--source include/start_slave.inc
--connection master
--sync_slave_with_master


--echo *** case 3 UNTIL inside trx1

--connection slave
--eval DELETE FROM t1 WHERE a <> $a0
--eval UPDATE t1 SET b='trx0' WHERE a = $a0


--connection slave1
# Blocker to hold off EXEC_MASTER_LOG_POS advance
BEGIN;
  --eval INSERT INTO t1 SET a= 1; # block trx1

--connection slave
--source include/stop_slave.inc

--let $pos_until=`SELECT $pos_0 - 1`
--replace_result $pos_0 <pos_0> $pos_until <pos_until> $pos_trx2 <pos_trx2>
--eval SELECT $pos_until < $pos_0 as "pos_until before trx2 start position"
--replace_result $fil_1 file_1 $pos_trx0 <pos_trx0>
--eval CHANGE MASTER TO MASTER_LOG_FILE = '$fil_1', MASTER_LOG_POS = $pos_trx0, MASTER_USE_GTID=no
--replace_result  $fil_2 file_2 $pos_until <pos_until>
--eval START SLAVE UNTIL MASTER_LOG_FILE = '$fil_2', MASTER_LOG_POS = $pos_until

--connection slave1
# unblock to see the slave applier stops at $until
ROLLBACK;

--echo Proof 1: Correct stop
--connection slave
--source include/wait_for_slave_sql_to_stop.inc
--let $file_stop= query_get_value(SHOW SLAVE STATUS, Relay_Master_Log_File, 1)
--let $pos_stop=  query_get_value(SHOW SLAVE STATUS, Exec_Master_Log_Pos, 1)
if (`SELECT "$file_stop" != "$fil_2" OR $pos_stop < $pos_until`)
{
  --echo *** ERROR: Slave stopped at $file_stop:$pos_stop which is not $fil_2:$pos_until.
  --die
}
--eval SELECT count(*) = $a0-1 as 'trx1 is committed' FROM t1 WHERE b = 'trx1'
--eval SELECT count(*) = 0 as 'trx2 is not committed' FROM t1 WHERE b = 'trx2'

--echo Proof 2: Resume works out
--source include/start_slave.inc
--connection master
--sync_slave_with_master


--echo *** case 4 Relay-log UNTIL inside trx1

--connection slave
--eval DELETE FROM t1 WHERE a <> $a0
--eval UPDATE t1 SET b='trx0' WHERE a = $a0

--connection slave1
# Blocker to hold off EXEC_MASTER_LOG_POS advance
BEGIN;
  --eval INSERT INTO t1 SET a= 1; # block trx1

--connection slave
--source include/stop_slave.inc
--replace_result $fil_1 file_1 $pos_trx0 <pos_trx0>
--eval CHANGE MASTER TO MASTER_LOG_FILE = '$fil_1', MASTER_LOG_POS = $pos_trx0, MASTER_USE_GTID=no
START SLAVE IO_THREAD;
--source include/wait_for_slave_io_to_start.inc

# The following test sets the stop coordinate to inside the first event
# of a relay log that holds events of a transaction started in an earlier log.
# Peek the stop position in the middle of trx1, not even on a event boundary.
--let $pos_until=255
--let $file_rl=slave-relay-bin.000003
--let $binlog_file=$file_rl

# Wait for the IO thread to write the trx1 to the relaylog before querying it.
# (wait_for_slave_param.inc isn't flexible enough, so do it manually.)
--let $continue= 1
--let $count=600
while ($continue)
{
  --let $cur_file= query_get_value(SHOW SLAVE STATUS, 'Master_Log_File', 1)
  --let $cur_pos= query_get_value(SHOW SLAVE STATUS, 'Read_Master_Log_Pos', 1)
  --let $continue= `SELECT '$cur_file' = '$fil_1' AND $cur_pos < $pos_trx1`
  if ($continue)
  {
    --dec $count
    if (!$count)
    {
      --echo **** ERROR: timeout waiting for Read_Master_Log_Pos($cur_pos) >= $pos_trx1 (file='$cur_file') ****"
      --die Timeout waiting for IO thread to write master events to the relaylog
    }
    --sleep 0.1
  }
}

--let $pos_xid=508
--let $info= query_get_value(SHOW RELAYLOG EVENTS IN '$file_rl' FROM $pos_xid LIMIT 1, Info, 1)

if (`SELECT "$info" NOT LIKE "COMMIT /* xid=% */" OR $pos_xid < $pos_until`)
{
  --echo *** Unexpected offset. Refine it to point to the correct XID event!
  --die
}

--replace_result  $file_rl file_2 $pos_until <pos_until>
--eval START SLAVE UNTIL RELAY_LOG_FILE = '$file_rl', RELAY_LOG_POS = $pos_until

--connection slave1
# unblock to see the slave applier stops at $until
ROLLBACK;

--echo Proof 1: Correct stop
--connection slave
--source include/wait_for_slave_sql_to_stop.inc
--let $file_stop= query_get_value(SHOW SLAVE STATUS, Relay_Log_File, 1)
--let $pos_stop=  query_get_value(SHOW SLAVE STATUS, Relay_Log_Pos, 1)
if (`SELECT strcmp("$file_rl","$file_stop") > -1`)
{
  --echo *** ERROR: Slave stopped at $file_stop:$pos_stop which is not $file_rl:$pos_until.
  --die
}

--eval SELECT count(*) = $a0-1 as 'trx1 is committed' FROM t1 WHERE b = 'trx1'
--eval SELECT count(*) = 0 as 'trx2 is not committed' FROM t1 WHERE b = 'trx2'

--echo Proof 2: Resume works out
--source include/start_slave.inc
--connection master
--sync_slave_with_master



--echo *** case 5 Relay-log UNTIL inside a "big" trx that spawns few relay logs

--connection master
CREATE TABLE t2 (a TEXT) ENGINE=InnoDB;
FLUSH LOGS;

--sync_slave_with_master
--let $file_stop= query_get_value(SHOW SLAVE STATUS, Relay_Log_File, 1)
--let $pos_stop=  query_get_value(SHOW SLAVE STATUS, Relay_Log_Pos, 1)
--let $records=`SELECT floor(4*@@global.max_relay_log_size / 1024) + 1`

--connection slave
--source include/stop_slave.inc

--connection master
# trx4
BEGIN;
--let $i=$records
while ($i)
{
 INSERT INTO t2 SET a=repeat('a',1024);

--dec $i
}
COMMIT;

# slave will stop there:
--let $file_trx4 = query_get_value(SHOW MASTER STATUS, File, 1)
--let $pos_trx4  = query_get_value(SHOW MASTER STATUS, Position, 1)

# trx5
INSERT INTO t2 SET a='a';
--let $pos_trx5  = query_get_value(SHOW MASTER STATUS, Position, 1)

--connection slave
START SLAVE IO_THREAD;
--source include/wait_for_slave_io_to_start.inc

# Set position inside the transaction though the value
# specified is beyond that relay log file.
# The coordianate may point to in a different event in future changes
# but should not move away from inside this big group of events.
# So we don't test which event in the transaction it points to.
--let $pos_until= 4500
--let $file_rl= slave-relay-bin.000010

--replace_result  $file_rl file_2 $pos_until <pos_until>
--eval START SLAVE UNTIL RELAY_LOG_FILE = '$file_rl', RELAY_LOG_POS = $pos_until

--echo Proof 1: Correct stop
--connection slave
--source include/wait_for_slave_sql_to_stop.inc
--let $file_stop= query_get_value(SHOW SLAVE STATUS, Relay_Master_Log_File, 1)
--let $pos_stop=  query_get_value(SHOW SLAVE STATUS, Exec_Master_Log_Pos, 1)
# It's showed the actual stop occurred before trx5
if (`SELECT strcmp("$file_trx4", "$file_stop") <> 0 OR $pos_stop >= $pos_trx5 OR count(*) <> $records FROM t2`)
{
  --echo *** ERROR: Slave stopped at *binlog* $file_stop:$pos_stop which is not $file_trx4:$pos_trx4.
  --die
}

--echo Proof 2: Resume works out
--source include/start_slave.inc
--connection master
--sync_slave_with_master

--let $diff_tables=master:t2,slave:t2
--source include/diff_tables.inc



--echo *** case 6 Relay-log UNTIL inside a small trx inside a sequence of relay logs

--connection slave
--source include/stop_slave.inc

--connection master
# trx6
--let $records=`SELECT count(*) FROM t2`
while ($records)
{
  BEGIN;
    DELETE FROM t2 LIMIT 1;
  COMMIT;
--dec $records
}
COMMIT;

--connection slave
START SLAVE IO_THREAD;
--source include/wait_for_slave_io_to_start.inc

--connection master
--source include/sync_slave_io_with_master.inc

--connection slave
# The relay-log coordinate is not at an event boundary and
# also may change across the server version.
# The test makes its best to check its coherance.
--let $pos_until= 3130
--let $file_rl= slave-relay-bin.000018

--let $pos_gtid = 2987
--let $info= query_get_value(SHOW RELAYLOG EVENTS IN '$file_rl' FROM $pos_gtid LIMIT 1, Info, 1)

if (`SELECT "$info" != "BEGIN GTID 0-1-23"`)
{
  --echo *** Unexpected offset. Refine it to point to the correct GTID!
  --die
}
--let $pos_event = 3120
--let $type= query_get_value(SHOW RELAYLOG EVENTS IN '$file_rl' FROM $pos_event LIMIT 1, Event_type, 1)
if (`SELECT "$type" != "Delete_rows_v1"`)
{
  --echo *** Unexpected offset. Refine it to point to the expected event!
  --die
}

--replace_result  $file_rl file_2 $pos_until <pos_until>
--eval START SLAVE UNTIL RELAY_LOG_FILE = '$file_rl', RELAY_LOG_POS = $pos_until

--echo Proof 1: Correct stop
--connection slave
--source include/wait_for_slave_sql_to_stop.inc
--let $file_stop= query_get_value(SHOW SLAVE STATUS, Relay_Log_File, 1)
--let $pos_stop=  query_get_value(SHOW SLAVE STATUS, Relay_Log_Pos, 1)
if (`SELECT strcmp("$file_stop", "$file_rl") = -1 OR
            strcmp("$file_stop", "$file_rl") =  0 AND $pos_stop < $pos_until`)
{
  --echo *** ERROR: Slave stopped at *relay* $file_stop:$pos_stop which is not $file_rl:$pos_until.
  --die
}

--echo Proof 2: Resume works out
--source include/start_slave.inc
--connection master
--sync_slave_with_master

--let $diff_tables=master:t2,slave:t2
--source include/diff_tables.inc

#
# Clean up.
#
--connection slave
--source include/stop_slave.inc
SET GLOBAL max_relay_log_size=@old_max_relay_log_size;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
--source include/start_slave.inc

--connection master
DROP TABLE t1, t2;

--sync_slave_with_master
--source include/rpl_end.inc