diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_dp.c | 8070 |
1 files changed, 8070 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c new file mode 100644 index 000000000..a79c62c43 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -0,0 +1,8070 @@ +/* + * Copyright © 2008 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +#include <linux/export.h> +#include <linux/i2c.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include <asm/byteorder.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_dp_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_probe_helper.h> + +#include "i915_debugfs.h" +#include "i915_drv.h" +#include "i915_trace.h" +#include "intel_atomic.h" +#include "intel_audio.h" +#include "intel_connector.h" +#include "intel_ddi.h" +#include "intel_display_types.h" +#include "intel_dp.h" +#include "intel_dp_link_training.h" +#include "intel_dp_mst.h" +#include "intel_dpio_phy.h" +#include "intel_fifo_underrun.h" +#include "intel_hdcp.h" +#include "intel_hdmi.h" +#include "intel_hotplug.h" +#include "intel_lspcon.h" +#include "intel_lvds.h" +#include "intel_panel.h" +#include "intel_psr.h" +#include "intel_sideband.h" +#include "intel_tc.h" +#include "intel_vdsc.h" + +#define DP_DPRX_ESI_LEN 14 + +/* DP DSC throughput values used for slice count calculations KPixels/s */ +#define DP_DSC_PEAK_PIXEL_RATE 2720000 +#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000 +#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 + +/* DP DSC FEC Overhead factor = 1/(0.972261) */ +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261 + +/* Compliance test status bits */ +#define INTEL_DP_RESOLUTION_SHIFT_MASK 0 +#define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK) +#define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK) +#define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK) + +struct dp_link_dpll { + int clock; + struct dpll dpll; +}; + +static const struct dp_link_dpll g4x_dpll[] = { + { 162000, + { .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } }, + { 270000, + { .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } } +}; + +static const struct dp_link_dpll pch_dpll[] = { + { 162000, + { .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } }, + { 270000, + { .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } } +}; + +static const struct dp_link_dpll vlv_dpll[] = { + { 162000, + { .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } }, + { 270000, + { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } } +}; + +/* + * CHV supports eDP 1.4 that have more link rates. + * Below only provides the fixed rate but exclude variable rate. + */ +static const struct dp_link_dpll chv_dpll[] = { + /* + * CHV requires to program fractional division for m2. + * m2 is stored in fixed point format using formula below + * (m2_int << 22) | m2_fraction + */ + { 162000, /* m2_int = 32, m2_fraction = 1677722 */ + { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } }, + { 270000, /* m2_int = 27, m2_fraction = 0 */ + { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }, +}; + +/* Constants for DP DSC configurations */ +static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15}; + +/* With Single pipe configuration, HW is capable of supporting maximum + * of 4 slices per line. + */ +static const u8 valid_dsc_slicecount[] = {1, 2, 4}; + +/** + * intel_dp_is_edp - is the given port attached to an eDP panel (either CPU or PCH) + * @intel_dp: DP struct + * + * If a CPU or PCH DP output is attached to an eDP panel, this function + * will return true, and false otherwise. + */ +bool intel_dp_is_edp(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + + return dig_port->base.type == INTEL_OUTPUT_EDP; +} + +static void intel_dp_link_down(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state); +static bool edp_panel_vdd_on(struct intel_dp *intel_dp); +static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync); +static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state); +static void vlv_steal_power_sequencer(struct drm_i915_private *dev_priv, + enum pipe pipe); +static void intel_dp_unset_edid(struct intel_dp *intel_dp); + +static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp) +{ + intel_dp->sink_rates[0] = 162000; + intel_dp->num_sink_rates = 1; +} + +/* update sink rates from dpcd */ +static void intel_dp_set_sink_rates(struct intel_dp *intel_dp) +{ + static const int dp_rates[] = { + 162000, 270000, 540000, 810000 + }; + int i, max_rate; + + if (drm_dp_has_quirk(&intel_dp->desc, 0, + DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS)) { + /* Needed, e.g., for Apple MBP 2017, 15 inch eDP Retina panel */ + static const int quirk_rates[] = { 162000, 270000, 324000 }; + + memcpy(intel_dp->sink_rates, quirk_rates, sizeof(quirk_rates)); + intel_dp->num_sink_rates = ARRAY_SIZE(quirk_rates); + + return; + } + + max_rate = drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]); + + for (i = 0; i < ARRAY_SIZE(dp_rates); i++) { + if (dp_rates[i] > max_rate) + break; + intel_dp->sink_rates[i] = dp_rates[i]; + } + + intel_dp->num_sink_rates = i; +} + +/* Get length of rates array potentially limited by max_rate. */ +static int intel_dp_rate_limit_len(const int *rates, int len, int max_rate) +{ + int i; + + /* Limit results by potentially reduced max rate */ + for (i = 0; i < len; i++) { + if (rates[len - i - 1] <= max_rate) + return len - i; + } + + return 0; +} + +/* Get length of common rates array potentially limited by max_rate. */ +static int intel_dp_common_len_rate_limit(const struct intel_dp *intel_dp, + int max_rate) +{ + return intel_dp_rate_limit_len(intel_dp->common_rates, + intel_dp->num_common_rates, max_rate); +} + +/* Theoretical max between source and sink */ +static int intel_dp_max_common_rate(struct intel_dp *intel_dp) +{ + return intel_dp->common_rates[intel_dp->num_common_rates - 1]; +} + +/* Theoretical max between source and sink */ +static int intel_dp_max_common_lane_count(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + int source_max = dig_port->max_lanes; + int sink_max = drm_dp_max_lane_count(intel_dp->dpcd); + int fia_max = intel_tc_port_fia_max_lane_count(dig_port); + + return min3(source_max, sink_max, fia_max); +} + +int intel_dp_max_lane_count(struct intel_dp *intel_dp) +{ + return intel_dp->max_link_lane_count; +} + +int +intel_dp_link_required(int pixel_clock, int bpp) +{ + /* pixel_clock is in kHz, divide bpp by 8 for bit to Byte conversion */ + return DIV_ROUND_UP(pixel_clock * bpp, 8); +} + +int +intel_dp_max_data_rate(int max_link_clock, int max_lanes) +{ + /* max_link_clock is the link symbol clock (LS_Clk) in kHz and not the + * link rate that is generally expressed in Gbps. Since, 8 bits of data + * is transmitted every LS_Clk per lane, there is no need to account for + * the channel encoding that is done in the PHY layer here. + */ + + return max_link_clock * max_lanes; +} + +static int cnl_max_source_rate(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + enum port port = dig_port->base.port; + + u32 voltage = intel_de_read(dev_priv, CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK; + + /* Low voltage SKUs are limited to max of 5.4G */ + if (voltage == VOLTAGE_INFO_0_85V) + return 540000; + + /* For this SKU 8.1G is supported in all ports */ + if (IS_CNL_WITH_PORT_F(dev_priv)) + return 810000; + + /* For other SKUs, max rate on ports A and D is 5.4G */ + if (port == PORT_A || port == PORT_D) + return 540000; + + return 810000; +} + +static int icl_max_source_rate(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port); + + if (intel_phy_is_combo(dev_priv, phy) && + !IS_ELKHARTLAKE(dev_priv) && + !intel_dp_is_edp(intel_dp)) + return 540000; + + return 810000; +} + +static void +intel_dp_set_source_rates(struct intel_dp *intel_dp) +{ + /* The values must be in increasing order */ + static const int cnl_rates[] = { + 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000 + }; + static const int bxt_rates[] = { + 162000, 216000, 243000, 270000, 324000, 432000, 540000 + }; + static const int skl_rates[] = { + 162000, 216000, 270000, 324000, 432000, 540000 + }; + static const int hsw_rates[] = { + 162000, 270000, 540000 + }; + static const int g4x_rates[] = { + 162000, 270000 + }; + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *encoder = &dig_port->base; + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + const int *source_rates; + int size, max_rate = 0, vbt_max_rate; + + /* This should only be done once */ + drm_WARN_ON(&dev_priv->drm, + intel_dp->source_rates || intel_dp->num_source_rates); + + if (INTEL_GEN(dev_priv) >= 10) { + source_rates = cnl_rates; + size = ARRAY_SIZE(cnl_rates); + if (IS_GEN(dev_priv, 10)) + max_rate = cnl_max_source_rate(intel_dp); + else + max_rate = icl_max_source_rate(intel_dp); + } else if (IS_GEN9_LP(dev_priv)) { + source_rates = bxt_rates; + size = ARRAY_SIZE(bxt_rates); + } else if (IS_GEN9_BC(dev_priv)) { + source_rates = skl_rates; + size = ARRAY_SIZE(skl_rates); + } else if ((IS_HASWELL(dev_priv) && !IS_HSW_ULX(dev_priv)) || + IS_BROADWELL(dev_priv)) { + source_rates = hsw_rates; + size = ARRAY_SIZE(hsw_rates); + } else { + source_rates = g4x_rates; + size = ARRAY_SIZE(g4x_rates); + } + + vbt_max_rate = intel_bios_dp_max_link_rate(encoder); + if (max_rate && vbt_max_rate) + max_rate = min(max_rate, vbt_max_rate); + else if (vbt_max_rate) + max_rate = vbt_max_rate; + + if (max_rate) + size = intel_dp_rate_limit_len(source_rates, size, max_rate); + + intel_dp->source_rates = source_rates; + intel_dp->num_source_rates = size; +} + +static int intersect_rates(const int *source_rates, int source_len, + const int *sink_rates, int sink_len, + int *common_rates) +{ + int i = 0, j = 0, k = 0; + + while (i < source_len && j < sink_len) { + if (source_rates[i] == sink_rates[j]) { + if (WARN_ON(k >= DP_MAX_SUPPORTED_RATES)) + return k; + common_rates[k] = source_rates[i]; + ++k; + ++i; + ++j; + } else if (source_rates[i] < sink_rates[j]) { + ++i; + } else { + ++j; + } + } + return k; +} + +/* return index of rate in rates array, or -1 if not found */ +static int intel_dp_rate_index(const int *rates, int len, int rate) +{ + int i; + + for (i = 0; i < len; i++) + if (rate == rates[i]) + return i; + + return -1; +} + +static void intel_dp_set_common_rates(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + drm_WARN_ON(&i915->drm, + !intel_dp->num_source_rates || !intel_dp->num_sink_rates); + + intel_dp->num_common_rates = intersect_rates(intel_dp->source_rates, + intel_dp->num_source_rates, + intel_dp->sink_rates, + intel_dp->num_sink_rates, + intel_dp->common_rates); + + /* Paranoia, there should always be something in common. */ + if (drm_WARN_ON(&i915->drm, intel_dp->num_common_rates == 0)) { + intel_dp->common_rates[0] = 162000; + intel_dp->num_common_rates = 1; + } +} + +static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate, + u8 lane_count) +{ + /* + * FIXME: we need to synchronize the current link parameters with + * hardware readout. Currently fast link training doesn't work on + * boot-up. + */ + if (link_rate == 0 || + link_rate > intel_dp->max_link_rate) + return false; + + if (lane_count == 0 || + lane_count > intel_dp_max_lane_count(intel_dp)) + return false; + + return true; +} + +static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp, + int link_rate, + u8 lane_count) +{ + const struct drm_display_mode *fixed_mode = + intel_dp->attached_connector->panel.fixed_mode; + int mode_rate, max_rate; + + mode_rate = intel_dp_link_required(fixed_mode->clock, 18); + max_rate = intel_dp_max_data_rate(link_rate, lane_count); + if (mode_rate > max_rate) + return false; + + return true; +} + +int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp, + int link_rate, u8 lane_count) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int index; + + /* + * TODO: Enable fallback on MST links once MST link compute can handle + * the fallback params. + */ + if (intel_dp->is_mst) { + drm_err(&i915->drm, "Link Training Unsuccessful\n"); + return -1; + } + + index = intel_dp_rate_index(intel_dp->common_rates, + intel_dp->num_common_rates, + link_rate); + if (index > 0) { + if (intel_dp_is_edp(intel_dp) && + !intel_dp_can_link_train_fallback_for_edp(intel_dp, + intel_dp->common_rates[index - 1], + lane_count)) { + drm_dbg_kms(&i915->drm, + "Retrying Link training for eDP with same parameters\n"); + return 0; + } + intel_dp->max_link_rate = intel_dp->common_rates[index - 1]; + intel_dp->max_link_lane_count = lane_count; + } else if (lane_count > 1) { + if (intel_dp_is_edp(intel_dp) && + !intel_dp_can_link_train_fallback_for_edp(intel_dp, + intel_dp_max_common_rate(intel_dp), + lane_count >> 1)) { + drm_dbg_kms(&i915->drm, + "Retrying Link training for eDP with same parameters\n"); + return 0; + } + intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp); + intel_dp->max_link_lane_count = lane_count >> 1; + } else { + drm_err(&i915->drm, "Link Training Unsuccessful\n"); + return -1; + } + + return 0; +} + +u32 intel_dp_mode_to_fec_clock(u32 mode_clock) +{ + return div_u64(mul_u32_u32(mode_clock, 1000000U), + DP_DSC_FEC_OVERHEAD_FACTOR); +} + +static int +small_joiner_ram_size_bits(struct drm_i915_private *i915) +{ + if (INTEL_GEN(i915) >= 11) + return 7680 * 8; + else + return 6144 * 8; +} + +static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915, + u32 link_clock, u32 lane_count, + u32 mode_clock, u32 mode_hdisplay) +{ + u32 bits_per_pixel, max_bpp_small_joiner_ram; + int i; + + /* + * Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* + * (LinkSymbolClock)* 8 * (TimeSlotsPerMTP) + * for SST -> TimeSlotsPerMTP is 1, + * for MST -> TimeSlotsPerMTP has to be calculated + */ + bits_per_pixel = (link_clock * lane_count * 8) / + intel_dp_mode_to_fec_clock(mode_clock); + drm_dbg_kms(&i915->drm, "Max link bpp: %u\n", bits_per_pixel); + + /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ + max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) / + mode_hdisplay; + drm_dbg_kms(&i915->drm, "Max small joiner bpp: %u\n", + max_bpp_small_joiner_ram); + + /* + * Greatest allowed DSC BPP = MIN (output BPP from available Link BW + * check, output bpp from small joiner RAM check) + */ + bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram); + + /* Error out if the max bpp is less than smallest allowed valid bpp */ + if (bits_per_pixel < valid_dsc_bpp[0]) { + drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n", + bits_per_pixel, valid_dsc_bpp[0]); + return 0; + } + + /* Find the nearest match in the array of known BPPs from VESA */ + for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) { + if (bits_per_pixel < valid_dsc_bpp[i + 1]) + break; + } + bits_per_pixel = valid_dsc_bpp[i]; + + /* + * Compressed BPP in U6.4 format so multiply by 16, for Gen 11, + * fractional part is 0 + */ + return bits_per_pixel << 4; +} + +static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp, + int mode_clock, int mode_hdisplay) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 min_slice_count, i; + int max_slice_width; + + if (mode_clock <= DP_DSC_PEAK_PIXEL_RATE) + min_slice_count = DIV_ROUND_UP(mode_clock, + DP_DSC_MAX_ENC_THROUGHPUT_0); + else + min_slice_count = DIV_ROUND_UP(mode_clock, + DP_DSC_MAX_ENC_THROUGHPUT_1); + + max_slice_width = drm_dp_dsc_sink_max_slice_width(intel_dp->dsc_dpcd); + if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) { + drm_dbg_kms(&i915->drm, + "Unsupported slice width %d by DP DSC Sink device\n", + max_slice_width); + return 0; + } + /* Also take into account max slice width */ + min_slice_count = max_t(u8, min_slice_count, + DIV_ROUND_UP(mode_hdisplay, + max_slice_width)); + + /* Find the closest match to the valid slice count values */ + for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) { + if (valid_dsc_slicecount[i] > + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, + false)) + break; + if (min_slice_count <= valid_dsc_slicecount[i]) + return valid_dsc_slicecount[i]; + } + + drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n", + min_slice_count); + return 0; +} + +static bool intel_dp_hdisplay_bad(struct drm_i915_private *dev_priv, + int hdisplay) +{ + /* + * Older platforms don't like hdisplay==4096 with DP. + * + * On ILK/SNB/IVB the pipe seems to be somewhat running (scanline + * and frame counter increment), but we don't get vblank interrupts, + * and the pipe underruns immediately. The link also doesn't seem + * to get trained properly. + * + * On CHV the vblank interrupts don't seem to disappear but + * otherwise the symptoms are similar. + * + * TODO: confirm the behaviour on HSW+ + */ + return hdisplay == 4096 && !HAS_DDI(dev_priv); +} + +static enum drm_mode_status +intel_dp_mode_valid_downstream(struct intel_connector *connector, + const struct drm_display_mode *mode, + int target_clock) +{ + struct intel_dp *intel_dp = intel_attached_dp(connector); + const struct drm_display_info *info = &connector->base.display_info; + int tmds_clock; + + if (intel_dp->dfp.max_dotclock && + target_clock > intel_dp->dfp.max_dotclock) + return MODE_CLOCK_HIGH; + + /* Assume 8bpc for the DP++/HDMI/DVI TMDS clock check */ + tmds_clock = target_clock; + if (drm_mode_is_420_only(info, mode)) + tmds_clock /= 2; + + if (intel_dp->dfp.min_tmds_clock && + tmds_clock < intel_dp->dfp.min_tmds_clock) + return MODE_CLOCK_LOW; + if (intel_dp->dfp.max_tmds_clock && + tmds_clock > intel_dp->dfp.max_tmds_clock) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static enum drm_mode_status +intel_dp_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); + struct intel_connector *intel_connector = to_intel_connector(connector); + struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode; + struct drm_i915_private *dev_priv = to_i915(connector->dev); + int target_clock = mode->clock; + int max_rate, mode_rate, max_lanes, max_link_clock; + int max_dotclk = dev_priv->max_dotclk_freq; + u16 dsc_max_output_bpp = 0; + u8 dsc_slice_count = 0; + enum drm_mode_status status; + + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + return MODE_NO_DBLESCAN; + + if (intel_dp_is_edp(intel_dp) && fixed_mode) { + if (mode->hdisplay > fixed_mode->hdisplay) + return MODE_PANEL; + + if (mode->vdisplay > fixed_mode->vdisplay) + return MODE_PANEL; + + target_clock = fixed_mode->clock; + } + + max_link_clock = intel_dp_max_link_rate(intel_dp); + max_lanes = intel_dp_max_lane_count(intel_dp); + + max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); + mode_rate = intel_dp_link_required(target_clock, 18); + + if (intel_dp_hdisplay_bad(dev_priv, mode->hdisplay)) + return MODE_H_ILLEGAL; + + /* + * Output bpp is stored in 6.4 format so right shift by 4 to get the + * integer value since we support only integer values of bpp. + */ + if ((INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) && + drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) { + if (intel_dp_is_edp(intel_dp)) { + dsc_max_output_bpp = + drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4; + dsc_slice_count = + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, + true); + } else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) { + dsc_max_output_bpp = + intel_dp_dsc_get_output_bpp(dev_priv, + max_link_clock, + max_lanes, + target_clock, + mode->hdisplay) >> 4; + dsc_slice_count = + intel_dp_dsc_get_slice_count(intel_dp, + target_clock, + mode->hdisplay); + } + } + + if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count)) || + target_clock > max_dotclk) + return MODE_CLOCK_HIGH; + + if (mode->clock < 10000) + return MODE_CLOCK_LOW; + + if (mode->flags & DRM_MODE_FLAG_DBLCLK) + return MODE_H_ILLEGAL; + + status = intel_dp_mode_valid_downstream(intel_connector, + mode, target_clock); + if (status != MODE_OK) + return status; + + return intel_mode_valid_max_plane_size(dev_priv, mode); +} + +u32 intel_dp_pack_aux(const u8 *src, int src_bytes) +{ + int i; + u32 v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((u32)src[i]) << ((3 - i) * 8); + return v; +} + +static void intel_dp_unpack_aux(u32 src, u8 *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +static void +intel_dp_init_panel_power_sequencer(struct intel_dp *intel_dp); +static void +intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp, + bool force_disable_vdd); +static void +intel_dp_pps_init(struct intel_dp *intel_dp); + +static intel_wakeref_t +pps_lock(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + intel_wakeref_t wakeref; + + /* + * See intel_power_sequencer_reset() why we need + * a power domain reference here. + */ + wakeref = intel_display_power_get(dev_priv, + intel_aux_power_domain(dp_to_dig_port(intel_dp))); + + mutex_lock(&dev_priv->pps_mutex); + + return wakeref; +} + +static intel_wakeref_t +pps_unlock(struct intel_dp *intel_dp, intel_wakeref_t wakeref) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + mutex_unlock(&dev_priv->pps_mutex); + intel_display_power_put(dev_priv, + intel_aux_power_domain(dp_to_dig_port(intel_dp)), + wakeref); + return 0; +} + +#define with_pps_lock(dp, wf) \ + for ((wf) = pps_lock(dp); (wf); (wf) = pps_unlock((dp), (wf))) + +static void +vlv_power_sequencer_kick(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum pipe pipe = intel_dp->pps_pipe; + bool pll_enabled, release_cl_override = false; + enum dpio_phy phy = DPIO_PHY(pipe); + enum dpio_channel ch = vlv_pipe_to_channel(pipe); + u32 DP; + + if (drm_WARN(&dev_priv->drm, + intel_de_read(dev_priv, intel_dp->output_reg) & DP_PORT_EN, + "skipping pipe %c power sequencer kick due to [ENCODER:%d:%s] being active\n", + pipe_name(pipe), dig_port->base.base.base.id, + dig_port->base.base.name)) + return; + + drm_dbg_kms(&dev_priv->drm, + "kicking pipe %c power sequencer for [ENCODER:%d:%s]\n", + pipe_name(pipe), dig_port->base.base.base.id, + dig_port->base.base.name); + + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + DP = intel_de_read(dev_priv, intel_dp->output_reg) & DP_DETECTED; + DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + DP |= DP_PORT_WIDTH(1); + DP |= DP_LINK_TRAIN_PAT_1; + + if (IS_CHERRYVIEW(dev_priv)) + DP |= DP_PIPE_SEL_CHV(pipe); + else + DP |= DP_PIPE_SEL(pipe); + + pll_enabled = intel_de_read(dev_priv, DPLL(pipe)) & DPLL_VCO_ENABLE; + + /* + * The DPLL for the pipe must be enabled for this to work. + * So enable temporarily it if it's not already enabled. + */ + if (!pll_enabled) { + release_cl_override = IS_CHERRYVIEW(dev_priv) && + !chv_phy_powergate_ch(dev_priv, phy, ch, true); + + if (vlv_force_pll_on(dev_priv, pipe, IS_CHERRYVIEW(dev_priv) ? + &chv_dpll[0].dpll : &vlv_dpll[0].dpll)) { + drm_err(&dev_priv->drm, + "Failed to force on pll for pipe %c!\n", + pipe_name(pipe)); + return; + } + } + + /* + * Similar magic as in intel_dp_enable_port(). + * We _must_ do this port enable + disable trick + * to make this power sequencer lock onto the port. + * Otherwise even VDD force bit won't work. + */ + intel_de_write(dev_priv, intel_dp->output_reg, DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); + + intel_de_write(dev_priv, intel_dp->output_reg, DP | DP_PORT_EN); + intel_de_posting_read(dev_priv, intel_dp->output_reg); + + intel_de_write(dev_priv, intel_dp->output_reg, DP & ~DP_PORT_EN); + intel_de_posting_read(dev_priv, intel_dp->output_reg); + + if (!pll_enabled) { + vlv_force_pll_off(dev_priv, pipe); + + if (release_cl_override) + chv_phy_powergate_ch(dev_priv, phy, ch, false); + } +} + +static enum pipe vlv_find_free_pps(struct drm_i915_private *dev_priv) +{ + struct intel_encoder *encoder; + unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B); + + /* + * We don't have power sequencer currently. + * Pick one that's not used by other ports. + */ + for_each_intel_dp(&dev_priv->drm, encoder) { + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + if (encoder->type == INTEL_OUTPUT_EDP) { + drm_WARN_ON(&dev_priv->drm, + intel_dp->active_pipe != INVALID_PIPE && + intel_dp->active_pipe != + intel_dp->pps_pipe); + + if (intel_dp->pps_pipe != INVALID_PIPE) + pipes &= ~(1 << intel_dp->pps_pipe); + } else { + drm_WARN_ON(&dev_priv->drm, + intel_dp->pps_pipe != INVALID_PIPE); + + if (intel_dp->active_pipe != INVALID_PIPE) + pipes &= ~(1 << intel_dp->active_pipe); + } + } + + if (pipes == 0) + return INVALID_PIPE; + + return ffs(pipes) - 1; +} + +static enum pipe +vlv_power_sequencer_pipe(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum pipe pipe; + + lockdep_assert_held(&dev_priv->pps_mutex); + + /* We should never land here with regular DP ports */ + drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp)); + + drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE && + intel_dp->active_pipe != intel_dp->pps_pipe); + + if (intel_dp->pps_pipe != INVALID_PIPE) + return intel_dp->pps_pipe; + + pipe = vlv_find_free_pps(dev_priv); + + /* + * Didn't find one. This should not happen since there + * are two power sequencers and up to two eDP ports. + */ + if (drm_WARN_ON(&dev_priv->drm, pipe == INVALID_PIPE)) + pipe = PIPE_A; + + vlv_steal_power_sequencer(dev_priv, pipe); + intel_dp->pps_pipe = pipe; + + drm_dbg_kms(&dev_priv->drm, + "picked pipe %c power sequencer for [ENCODER:%d:%s]\n", + pipe_name(intel_dp->pps_pipe), + dig_port->base.base.base.id, + dig_port->base.base.name); + + /* init power sequencer on this pipe and port */ + intel_dp_init_panel_power_sequencer(intel_dp); + intel_dp_init_panel_power_sequencer_registers(intel_dp, true); + + /* + * Even vdd force doesn't work until we've made + * the power sequencer lock in on the port. + */ + vlv_power_sequencer_kick(intel_dp); + + return intel_dp->pps_pipe; +} + +static int +bxt_power_sequencer_idx(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + int backlight_controller = dev_priv->vbt.backlight.controller; + + lockdep_assert_held(&dev_priv->pps_mutex); + + /* We should never land here with regular DP ports */ + drm_WARN_ON(&dev_priv->drm, !intel_dp_is_edp(intel_dp)); + + if (!intel_dp->pps_reset) + return backlight_controller; + + intel_dp->pps_reset = false; + + /* + * Only the HW needs to be reprogrammed, the SW state is fixed and + * has been setup during connector init. + */ + intel_dp_init_panel_power_sequencer_registers(intel_dp, false); + + return backlight_controller; +} + +typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv, + enum pipe pipe); + +static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + return intel_de_read(dev_priv, PP_STATUS(pipe)) & PP_ON; +} + +static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + return intel_de_read(dev_priv, PP_CONTROL(pipe)) & EDP_FORCE_VDD; +} + +static bool vlv_pipe_any(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + return true; +} + +static enum pipe +vlv_initial_pps_pipe(struct drm_i915_private *dev_priv, + enum port port, + vlv_pipe_check pipe_check) +{ + enum pipe pipe; + + for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) { + u32 port_sel = intel_de_read(dev_priv, PP_ON_DELAYS(pipe)) & + PANEL_PORT_SELECT_MASK; + + if (port_sel != PANEL_PORT_SELECT_VLV(port)) + continue; + + if (!pipe_check(dev_priv, pipe)) + continue; + + return pipe; + } + + return INVALID_PIPE; +} + +static void +vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum port port = dig_port->base.port; + + lockdep_assert_held(&dev_priv->pps_mutex); + + /* try to find a pipe with this port selected */ + /* first pick one where the panel is on */ + intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port, + vlv_pipe_has_pp_on); + /* didn't find one? pick one where vdd is on */ + if (intel_dp->pps_pipe == INVALID_PIPE) + intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port, + vlv_pipe_has_vdd_on); + /* didn't find one? pick one with just the correct port */ + if (intel_dp->pps_pipe == INVALID_PIPE) + intel_dp->pps_pipe = vlv_initial_pps_pipe(dev_priv, port, + vlv_pipe_any); + + /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */ + if (intel_dp->pps_pipe == INVALID_PIPE) { + drm_dbg_kms(&dev_priv->drm, + "no initial power sequencer for [ENCODER:%d:%s]\n", + dig_port->base.base.base.id, + dig_port->base.base.name); + return; + } + + drm_dbg_kms(&dev_priv->drm, + "initial power sequencer for [ENCODER:%d:%s]: pipe %c\n", + dig_port->base.base.base.id, + dig_port->base.base.name, + pipe_name(intel_dp->pps_pipe)); + + intel_dp_init_panel_power_sequencer(intel_dp); + intel_dp_init_panel_power_sequencer_registers(intel_dp, false); +} + +void intel_power_sequencer_reset(struct drm_i915_private *dev_priv) +{ + struct intel_encoder *encoder; + + if (drm_WARN_ON(&dev_priv->drm, + !(IS_VALLEYVIEW(dev_priv) || + IS_CHERRYVIEW(dev_priv) || + IS_GEN9_LP(dev_priv)))) + return; + + /* + * We can't grab pps_mutex here due to deadlock with power_domain + * mutex when power_domain functions are called while holding pps_mutex. + * That also means that in order to use pps_pipe the code needs to + * hold both a power domain reference and pps_mutex, and the power domain + * reference get/put must be done while _not_ holding pps_mutex. + * pps_{lock,unlock}() do these steps in the correct order, so one + * should use them always. + */ + + for_each_intel_dp(&dev_priv->drm, encoder) { + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + drm_WARN_ON(&dev_priv->drm, + intel_dp->active_pipe != INVALID_PIPE); + + if (encoder->type != INTEL_OUTPUT_EDP) + continue; + + if (IS_GEN9_LP(dev_priv)) + intel_dp->pps_reset = true; + else + intel_dp->pps_pipe = INVALID_PIPE; + } +} + +struct pps_registers { + i915_reg_t pp_ctrl; + i915_reg_t pp_stat; + i915_reg_t pp_on; + i915_reg_t pp_off; + i915_reg_t pp_div; +}; + +static void intel_pps_get_registers(struct intel_dp *intel_dp, + struct pps_registers *regs) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + int pps_idx = 0; + + memset(regs, 0, sizeof(*regs)); + + if (IS_GEN9_LP(dev_priv)) + pps_idx = bxt_power_sequencer_idx(intel_dp); + else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + pps_idx = vlv_power_sequencer_pipe(intel_dp); + + regs->pp_ctrl = PP_CONTROL(pps_idx); + regs->pp_stat = PP_STATUS(pps_idx); + regs->pp_on = PP_ON_DELAYS(pps_idx); + regs->pp_off = PP_OFF_DELAYS(pps_idx); + + /* Cycle delay moved from PP_DIVISOR to PP_CONTROL */ + if (IS_GEN9_LP(dev_priv) || INTEL_PCH_TYPE(dev_priv) >= PCH_CNP) + regs->pp_div = INVALID_MMIO_REG; + else + regs->pp_div = PP_DIVISOR(pps_idx); +} + +static i915_reg_t +_pp_ctrl_reg(struct intel_dp *intel_dp) +{ + struct pps_registers regs; + + intel_pps_get_registers(intel_dp, ®s); + + return regs.pp_ctrl; +} + +static i915_reg_t +_pp_stat_reg(struct intel_dp *intel_dp) +{ + struct pps_registers regs; + + intel_pps_get_registers(intel_dp, ®s); + + return regs.pp_stat; +} + +/* Reboot notifier handler to shutdown panel power to guarantee T12 timing + This function only applicable when panel PM state is not to be tracked */ +static int edp_notify_handler(struct notifier_block *this, unsigned long code, + void *unused) +{ + struct intel_dp *intel_dp = container_of(this, typeof(* intel_dp), + edp_notifier); + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + intel_wakeref_t wakeref; + + if (!intel_dp_is_edp(intel_dp) || code != SYS_RESTART) + return 0; + + with_pps_lock(intel_dp, wakeref) { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + enum pipe pipe = vlv_power_sequencer_pipe(intel_dp); + i915_reg_t pp_ctrl_reg, pp_div_reg; + u32 pp_div; + + pp_ctrl_reg = PP_CONTROL(pipe); + pp_div_reg = PP_DIVISOR(pipe); + pp_div = intel_de_read(dev_priv, pp_div_reg); + pp_div &= PP_REFERENCE_DIVIDER_MASK; + + /* 0x1F write to PP_DIV_REG sets max cycle delay */ + intel_de_write(dev_priv, pp_div_reg, pp_div | 0x1F); + intel_de_write(dev_priv, pp_ctrl_reg, + PANEL_UNLOCK_REGS); + msleep(intel_dp->panel_power_cycle_delay); + } + } + + return 0; +} + +static bool edp_have_panel_power(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + lockdep_assert_held(&dev_priv->pps_mutex); + + if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + intel_dp->pps_pipe == INVALID_PIPE) + return false; + + return (intel_de_read(dev_priv, _pp_stat_reg(intel_dp)) & PP_ON) != 0; +} + +static bool edp_have_panel_vdd(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + lockdep_assert_held(&dev_priv->pps_mutex); + + if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + intel_dp->pps_pipe == INVALID_PIPE) + return false; + + return intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD; +} + +static void +intel_dp_check_edp(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (!intel_dp_is_edp(intel_dp)) + return; + + if (!edp_have_panel_power(intel_dp) && !edp_have_panel_vdd(intel_dp)) { + drm_WARN(&dev_priv->drm, 1, + "eDP powered off while attempting aux channel communication.\n"); + drm_dbg_kms(&dev_priv->drm, "Status 0x%08x Control 0x%08x\n", + intel_de_read(dev_priv, _pp_stat_reg(intel_dp)), + intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp))); + } +} + +static u32 +intel_dp_aux_wait_done(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp); + const unsigned int timeout_ms = 10; + u32 status; + bool done; + +#define C (((status = intel_uncore_read_notrace(&i915->uncore, ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) + done = wait_event_timeout(i915->gmbus_wait_queue, C, + msecs_to_jiffies_timeout(timeout_ms)); + + /* just trace the final value */ + trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true); + + if (!done) + drm_err(&i915->drm, + "%s: did not complete or timeout within %ums (status 0x%08x)\n", + intel_dp->aux.name, timeout_ms, status); +#undef C + + return status; +} + +static u32 g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (index) + return 0; + + /* + * The clock divider is based off the hrawclk, and would like to run at + * 2MHz. So, take the hrawclk value and divide by 2000 and use that + */ + return DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq, 2000); +} + +static u32 ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + u32 freq; + + if (index) + return 0; + + /* + * The clock divider is based off the cdclk or PCH rawclk, and would + * like to run at 2MHz. So, take the cdclk or PCH rawclk value and + * divide by 2000 and use that + */ + if (dig_port->aux_ch == AUX_CH_A) + freq = dev_priv->cdclk.hw.cdclk; + else + freq = RUNTIME_INFO(dev_priv)->rawclk_freq; + return DIV_ROUND_CLOSEST(freq, 2000); +} + +static u32 hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + + if (dig_port->aux_ch != AUX_CH_A && HAS_PCH_LPT_H(dev_priv)) { + /* Workaround for non-ULT HSW */ + switch (index) { + case 0: return 63; + case 1: return 72; + default: return 0; + } + } + + return ilk_get_aux_clock_divider(intel_dp, index); +} + +static u32 skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index) +{ + /* + * SKL doesn't need us to program the AUX clock divider (Hardware will + * derive the clock from CDCLK automatically). We still implement the + * get_aux_clock_divider vfunc to plug-in into the existing code. + */ + return index ? 0 : 1; +} + +static u32 g4x_get_aux_send_ctl(struct intel_dp *intel_dp, + int send_bytes, + u32 aux_clock_divider) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = + to_i915(dig_port->base.base.dev); + u32 precharge, timeout; + + if (IS_GEN(dev_priv, 6)) + precharge = 3; + else + precharge = 5; + + if (IS_BROADWELL(dev_priv)) + timeout = DP_AUX_CH_CTL_TIME_OUT_600us; + else + timeout = DP_AUX_CH_CTL_TIME_OUT_400us; + + return DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_INTERRUPT | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + timeout | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT); +} + +static u32 skl_get_aux_send_ctl(struct intel_dp *intel_dp, + int send_bytes, + u32 unused) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *i915 = + to_i915(dig_port->base.base.dev); + enum phy phy = intel_port_to_phy(i915, dig_port->base.port); + u32 ret; + + ret = DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_INTERRUPT | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_TIME_OUT_MAX | + DP_AUX_CH_CTL_RECEIVE_ERROR | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + DP_AUX_CH_CTL_FW_SYNC_PULSE_SKL(32) | + DP_AUX_CH_CTL_SYNC_PULSE_SKL(32); + + if (intel_phy_is_tc(i915, phy) && + dig_port->tc_mode == TC_PORT_TBT_ALT) + ret |= DP_AUX_CH_CTL_TBT_IO; + + return ret; +} + +static int +intel_dp_aux_xfer(struct intel_dp *intel_dp, + const u8 *send, int send_bytes, + u8 *recv, int recv_size, + u32 aux_send_ctl_flags) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *i915 = + to_i915(dig_port->base.base.dev); + struct intel_uncore *uncore = &i915->uncore; + enum phy phy = intel_port_to_phy(i915, dig_port->base.port); + bool is_tc_port = intel_phy_is_tc(i915, phy); + i915_reg_t ch_ctl, ch_data[5]; + u32 aux_clock_divider; + enum intel_display_power_domain aux_domain; + intel_wakeref_t aux_wakeref; + intel_wakeref_t pps_wakeref; + int i, ret, recv_bytes; + int try, clock = 0; + u32 status; + bool vdd; + + ch_ctl = intel_dp->aux_ch_ctl_reg(intel_dp); + for (i = 0; i < ARRAY_SIZE(ch_data); i++) + ch_data[i] = intel_dp->aux_ch_data_reg(intel_dp, i); + + if (is_tc_port) + intel_tc_port_lock(dig_port); + + aux_domain = intel_aux_power_domain(dig_port); + + aux_wakeref = intel_display_power_get(i915, aux_domain); + pps_wakeref = pps_lock(intel_dp); + + /* + * We will be called with VDD already enabled for dpcd/edid/oui reads. + * In such cases we want to leave VDD enabled and it's up to upper layers + * to turn it off. But for eg. i2c-dev access we need to turn it on/off + * ourselves. + */ + vdd = edp_panel_vdd_on(intel_dp); + + /* dp aux is extremely sensitive to irq latency, hence request the + * lowest possible wakeup latency and so prevent the cpu from going into + * deep sleep states. + */ + cpu_latency_qos_update_request(&intel_dp->pm_qos, 0); + + intel_dp_check_edp(intel_dp); + + /* Try to wait for any previous AUX channel activity */ + for (try = 0; try < 3; try++) { + status = intel_uncore_read_notrace(uncore, ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + msleep(1); + } + /* just trace the final value */ + trace_i915_reg_rw(false, ch_ctl, status, sizeof(status), true); + + if (try == 3) { + const u32 status = intel_uncore_read(uncore, ch_ctl); + + if (status != intel_dp->aux_busy_last_status) { + drm_WARN(&i915->drm, 1, + "%s: not started (status 0x%08x)\n", + intel_dp->aux.name, status); + intel_dp->aux_busy_last_status = status; + } + + ret = -EBUSY; + goto out; + } + + /* Only 5 data registers! */ + if (drm_WARN_ON(&i915->drm, send_bytes > 20 || recv_size > 20)) { + ret = -E2BIG; + goto out; + } + + while ((aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, clock++))) { + u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp, + send_bytes, + aux_clock_divider); + + send_ctl |= aux_send_ctl_flags; + + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) + intel_uncore_write(uncore, + ch_data[i >> 2], + intel_dp_pack_aux(send + i, + send_bytes - i)); + + /* Send the command and wait for it to complete */ + intel_uncore_write(uncore, ch_ctl, send_ctl); + + status = intel_dp_aux_wait_done(intel_dp); + + /* Clear done status and any errors */ + intel_uncore_write(uncore, + ch_ctl, + status | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + + /* DP CTS 1.2 Core Rev 1.1, 4.2.1.1 & 4.2.1.2 + * 400us delay required for errors and timeouts + * Timeout errors from the HW already meet this + * requirement so skip to next iteration + */ + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) + continue; + + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + usleep_range(400, 500); + continue; + } + if (status & DP_AUX_CH_CTL_DONE) + goto done; + } + } + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + drm_err(&i915->drm, "%s: not done (status 0x%08x)\n", + intel_dp->aux.name, status); + ret = -EBUSY; + goto out; + } + +done: + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + drm_err(&i915->drm, "%s: receive error (status 0x%08x)\n", + intel_dp->aux.name, status); + ret = -EIO; + goto out; + } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + drm_dbg_kms(&i915->drm, "%s: timeout (status 0x%08x)\n", + intel_dp->aux.name, status); + ret = -ETIMEDOUT; + goto out; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + + /* + * By BSpec: "Message sizes of 0 or >20 are not allowed." + * We have no idea of what happened so we return -EBUSY so + * drm layer takes care for the necessary retries. + */ + if (recv_bytes == 0 || recv_bytes > 20) { + drm_dbg_kms(&i915->drm, + "%s: Forbidden recv_bytes = %d on aux transaction\n", + intel_dp->aux.name, recv_bytes); + ret = -EBUSY; + goto out; + } + + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) + intel_dp_unpack_aux(intel_uncore_read(uncore, ch_data[i >> 2]), + recv + i, recv_bytes - i); + + ret = recv_bytes; +out: + cpu_latency_qos_update_request(&intel_dp->pm_qos, PM_QOS_DEFAULT_VALUE); + + if (vdd) + edp_panel_vdd_off(intel_dp, false); + + pps_unlock(intel_dp, pps_wakeref); + intel_display_power_put_async(i915, aux_domain, aux_wakeref); + + if (is_tc_port) + intel_tc_port_unlock(dig_port); + + return ret; +} + +#define BARE_ADDRESS_SIZE 3 +#define HEADER_SIZE (BARE_ADDRESS_SIZE + 1) + +static void +intel_dp_aux_header(u8 txbuf[HEADER_SIZE], + const struct drm_dp_aux_msg *msg) +{ + txbuf[0] = (msg->request << 4) | ((msg->address >> 16) & 0xf); + txbuf[1] = (msg->address >> 8) & 0xff; + txbuf[2] = msg->address & 0xff; + txbuf[3] = msg->size - 1; +} + +static u32 intel_dp_aux_xfer_flags(const struct drm_dp_aux_msg *msg) +{ + /* + * If we're trying to send the HDCP Aksv, we need to set a the Aksv + * select bit to inform the hardware to send the Aksv after our header + * since we can't access that data from software. + */ + if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_WRITE && + msg->address == DP_AUX_HDCP_AKSV) + return DP_AUX_CH_CTL_AUX_AKSV_SELECT; + + return 0; +} + +static ssize_t +intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) +{ + struct intel_dp *intel_dp = container_of(aux, struct intel_dp, aux); + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 txbuf[20], rxbuf[20]; + size_t txsize, rxsize; + u32 flags = intel_dp_aux_xfer_flags(msg); + int ret; + + intel_dp_aux_header(txbuf, msg); + + switch (msg->request & ~DP_AUX_I2C_MOT) { + case DP_AUX_NATIVE_WRITE: + case DP_AUX_I2C_WRITE: + case DP_AUX_I2C_WRITE_STATUS_UPDATE: + txsize = msg->size ? HEADER_SIZE + msg->size : BARE_ADDRESS_SIZE; + rxsize = 2; /* 0 or 1 data bytes */ + + if (drm_WARN_ON(&i915->drm, txsize > 20)) + return -E2BIG; + + drm_WARN_ON(&i915->drm, !msg->buffer != !msg->size); + + if (msg->buffer) + memcpy(txbuf + HEADER_SIZE, msg->buffer, msg->size); + + ret = intel_dp_aux_xfer(intel_dp, txbuf, txsize, + rxbuf, rxsize, flags); + if (ret > 0) { + msg->reply = rxbuf[0] >> 4; + + if (ret > 1) { + /* Number of bytes written in a short write. */ + ret = clamp_t(int, rxbuf[1], 0, msg->size); + } else { + /* Return payload size. */ + ret = msg->size; + } + } + break; + + case DP_AUX_NATIVE_READ: + case DP_AUX_I2C_READ: + txsize = msg->size ? HEADER_SIZE : BARE_ADDRESS_SIZE; + rxsize = msg->size + 1; + + if (drm_WARN_ON(&i915->drm, rxsize > 20)) + return -E2BIG; + + ret = intel_dp_aux_xfer(intel_dp, txbuf, txsize, + rxbuf, rxsize, flags); + if (ret > 0) { + msg->reply = rxbuf[0] >> 4; + /* + * Assume happy day, and copy the data. The caller is + * expected to check msg->reply before touching it. + * + * Return payload size. + */ + ret--; + memcpy(msg->buffer, rxbuf + 1, ret); + } + break; + + default: + ret = -EINVAL; + break; + } + + return ret; +} + + +static i915_reg_t g4x_aux_ctl_reg(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum aux_ch aux_ch = dig_port->aux_ch; + + switch (aux_ch) { + case AUX_CH_B: + case AUX_CH_C: + case AUX_CH_D: + return DP_AUX_CH_CTL(aux_ch); + default: + MISSING_CASE(aux_ch); + return DP_AUX_CH_CTL(AUX_CH_B); + } +} + +static i915_reg_t g4x_aux_data_reg(struct intel_dp *intel_dp, int index) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum aux_ch aux_ch = dig_port->aux_ch; + + switch (aux_ch) { + case AUX_CH_B: + case AUX_CH_C: + case AUX_CH_D: + return DP_AUX_CH_DATA(aux_ch, index); + default: + MISSING_CASE(aux_ch); + return DP_AUX_CH_DATA(AUX_CH_B, index); + } +} + +static i915_reg_t ilk_aux_ctl_reg(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum aux_ch aux_ch = dig_port->aux_ch; + + switch (aux_ch) { + case AUX_CH_A: + return DP_AUX_CH_CTL(aux_ch); + case AUX_CH_B: + case AUX_CH_C: + case AUX_CH_D: + return PCH_DP_AUX_CH_CTL(aux_ch); + default: + MISSING_CASE(aux_ch); + return DP_AUX_CH_CTL(AUX_CH_A); + } +} + +static i915_reg_t ilk_aux_data_reg(struct intel_dp *intel_dp, int index) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum aux_ch aux_ch = dig_port->aux_ch; + + switch (aux_ch) { + case AUX_CH_A: + return DP_AUX_CH_DATA(aux_ch, index); + case AUX_CH_B: + case AUX_CH_C: + case AUX_CH_D: + return PCH_DP_AUX_CH_DATA(aux_ch, index); + default: + MISSING_CASE(aux_ch); + return DP_AUX_CH_DATA(AUX_CH_A, index); + } +} + +static i915_reg_t skl_aux_ctl_reg(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum aux_ch aux_ch = dig_port->aux_ch; + + switch (aux_ch) { + case AUX_CH_A: + case AUX_CH_B: + case AUX_CH_C: + case AUX_CH_D: + case AUX_CH_E: + case AUX_CH_F: + case AUX_CH_G: + return DP_AUX_CH_CTL(aux_ch); + default: + MISSING_CASE(aux_ch); + return DP_AUX_CH_CTL(AUX_CH_A); + } +} + +static i915_reg_t skl_aux_data_reg(struct intel_dp *intel_dp, int index) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + enum aux_ch aux_ch = dig_port->aux_ch; + + switch (aux_ch) { + case AUX_CH_A: + case AUX_CH_B: + case AUX_CH_C: + case AUX_CH_D: + case AUX_CH_E: + case AUX_CH_F: + case AUX_CH_G: + return DP_AUX_CH_DATA(aux_ch, index); + default: + MISSING_CASE(aux_ch); + return DP_AUX_CH_DATA(AUX_CH_A, index); + } +} + +static void +intel_dp_aux_fini(struct intel_dp *intel_dp) +{ + if (cpu_latency_qos_request_active(&intel_dp->pm_qos)) + cpu_latency_qos_remove_request(&intel_dp->pm_qos); + + kfree(intel_dp->aux.name); +} + +static void +intel_dp_aux_init(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *encoder = &dig_port->base; + + if (INTEL_GEN(dev_priv) >= 9) { + intel_dp->aux_ch_ctl_reg = skl_aux_ctl_reg; + intel_dp->aux_ch_data_reg = skl_aux_data_reg; + } else if (HAS_PCH_SPLIT(dev_priv)) { + intel_dp->aux_ch_ctl_reg = ilk_aux_ctl_reg; + intel_dp->aux_ch_data_reg = ilk_aux_data_reg; + } else { + intel_dp->aux_ch_ctl_reg = g4x_aux_ctl_reg; + intel_dp->aux_ch_data_reg = g4x_aux_data_reg; + } + + if (INTEL_GEN(dev_priv) >= 9) + intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider; + else if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) + intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider; + else if (HAS_PCH_SPLIT(dev_priv)) + intel_dp->get_aux_clock_divider = ilk_get_aux_clock_divider; + else + intel_dp->get_aux_clock_divider = g4x_get_aux_clock_divider; + + if (INTEL_GEN(dev_priv) >= 9) + intel_dp->get_aux_send_ctl = skl_get_aux_send_ctl; + else + intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl; + + drm_dp_aux_init(&intel_dp->aux); + + /* Failure to allocate our preferred name is not critical */ + intel_dp->aux.name = kasprintf(GFP_KERNEL, "AUX %c/port %c", + aux_ch_name(dig_port->aux_ch), + port_name(encoder->port)); + intel_dp->aux.transfer = intel_dp_aux_transfer; + cpu_latency_qos_add_request(&intel_dp->pm_qos, PM_QOS_DEFAULT_VALUE); +} + +bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp) +{ + int max_rate = intel_dp->source_rates[intel_dp->num_source_rates - 1]; + + return max_rate >= 540000; +} + +bool intel_dp_source_supports_hbr3(struct intel_dp *intel_dp) +{ + int max_rate = intel_dp->source_rates[intel_dp->num_source_rates - 1]; + + return max_rate >= 810000; +} + +static void +intel_dp_set_clock(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + const struct dp_link_dpll *divisor = NULL; + int i, count = 0; + + if (IS_G4X(dev_priv)) { + divisor = g4x_dpll; + count = ARRAY_SIZE(g4x_dpll); + } else if (HAS_PCH_SPLIT(dev_priv)) { + divisor = pch_dpll; + count = ARRAY_SIZE(pch_dpll); + } else if (IS_CHERRYVIEW(dev_priv)) { + divisor = chv_dpll; + count = ARRAY_SIZE(chv_dpll); + } else if (IS_VALLEYVIEW(dev_priv)) { + divisor = vlv_dpll; + count = ARRAY_SIZE(vlv_dpll); + } + + if (divisor && count) { + for (i = 0; i < count; i++) { + if (pipe_config->port_clock == divisor[i].clock) { + pipe_config->dpll = divisor[i].dpll; + pipe_config->clock_set = true; + break; + } + } + } +} + +static void snprintf_int_array(char *str, size_t len, + const int *array, int nelem) +{ + int i; + + str[0] = '\0'; + + for (i = 0; i < nelem; i++) { + int r = snprintf(str, len, "%s%d", i ? ", " : "", array[i]); + if (r >= len) + return; + str += r; + len -= r; + } +} + +static void intel_dp_print_rates(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + char str[128]; /* FIXME: too big for stack? */ + + if (!drm_debug_enabled(DRM_UT_KMS)) + return; + + snprintf_int_array(str, sizeof(str), + intel_dp->source_rates, intel_dp->num_source_rates); + drm_dbg_kms(&i915->drm, "source rates: %s\n", str); + + snprintf_int_array(str, sizeof(str), + intel_dp->sink_rates, intel_dp->num_sink_rates); + drm_dbg_kms(&i915->drm, "sink rates: %s\n", str); + + snprintf_int_array(str, sizeof(str), + intel_dp->common_rates, intel_dp->num_common_rates); + drm_dbg_kms(&i915->drm, "common rates: %s\n", str); +} + +int +intel_dp_max_link_rate(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int len; + + len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->max_link_rate); + if (drm_WARN_ON(&i915->drm, len <= 0)) + return 162000; + + return intel_dp->common_rates[len - 1]; +} + +int intel_dp_rate_select(struct intel_dp *intel_dp, int rate) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int i = intel_dp_rate_index(intel_dp->sink_rates, + intel_dp->num_sink_rates, rate); + + if (drm_WARN_ON(&i915->drm, i < 0)) + i = 0; + + return i; +} + +void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, + u8 *link_bw, u8 *rate_select) +{ + /* eDP 1.4 rate select method. */ + if (intel_dp->use_rate_select) { + *link_bw = 0; + *rate_select = + intel_dp_rate_select(intel_dp, port_clock); + } else { + *link_bw = drm_dp_link_rate_to_bw_code(port_clock); + *rate_select = 0; + } +} + +static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp, + const struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + /* On TGL, FEC is supported on all Pipes */ + if (INTEL_GEN(dev_priv) >= 12) + return true; + + if (IS_GEN(dev_priv, 11) && pipe_config->cpu_transcoder != TRANSCODER_A) + return true; + + return false; +} + +static bool intel_dp_supports_fec(struct intel_dp *intel_dp, + const struct intel_crtc_state *pipe_config) +{ + return intel_dp_source_supports_fec(intel_dp, pipe_config) && + drm_dp_sink_supports_fec(intel_dp->fec_capable); +} + +static bool intel_dp_supports_dsc(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; + + if (!intel_dp_is_edp(intel_dp) && !crtc_state->fec_enable) + return false; + + return intel_dsc_source_support(encoder, crtc_state) && + drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd); +} + +static bool intel_dp_hdmi_ycbcr420(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + return crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 || + (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 && + intel_dp->dfp.ycbcr_444_to_420); +} + +static int intel_dp_hdmi_tmds_clock(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state, int bpc) +{ + int clock = crtc_state->hw.adjusted_mode.crtc_clock * bpc / 8; + + if (intel_dp_hdmi_ycbcr420(intel_dp, crtc_state)) + clock /= 2; + + return clock; +} + +static bool intel_dp_hdmi_tmds_clock_valid(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state, int bpc) +{ + int tmds_clock = intel_dp_hdmi_tmds_clock(intel_dp, crtc_state, bpc); + + if (intel_dp->dfp.min_tmds_clock && + tmds_clock < intel_dp->dfp.min_tmds_clock) + return false; + + if (intel_dp->dfp.max_tmds_clock && + tmds_clock > intel_dp->dfp.max_tmds_clock) + return false; + + return true; +} + +static bool intel_dp_hdmi_deep_color_possible(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state, + int bpc) +{ + + return intel_hdmi_deep_color_possible(crtc_state, bpc, + intel_dp->has_hdmi_sink, + intel_dp_hdmi_ycbcr420(intel_dp, crtc_state)) && + intel_dp_hdmi_tmds_clock_valid(intel_dp, crtc_state, bpc); +} + +static int intel_dp_max_bpp(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_connector *intel_connector = intel_dp->attached_connector; + int bpp, bpc; + + bpc = crtc_state->pipe_bpp / 3; + + if (intel_dp->dfp.max_bpc) + bpc = min_t(int, bpc, intel_dp->dfp.max_bpc); + + if (intel_dp->dfp.min_tmds_clock) { + for (; bpc >= 10; bpc -= 2) { + if (intel_dp_hdmi_deep_color_possible(intel_dp, crtc_state, bpc)) + break; + } + } + + bpp = bpc * 3; + if (intel_dp_is_edp(intel_dp)) { + /* Get bpp from vbt only for panels that dont have bpp in edid */ + if (intel_connector->base.display_info.bpc == 0 && + dev_priv->vbt.edp.bpp && dev_priv->vbt.edp.bpp < bpp) { + drm_dbg_kms(&dev_priv->drm, + "clamping bpp for eDP panel to BIOS-provided %i\n", + dev_priv->vbt.edp.bpp); + bpp = dev_priv->vbt.edp.bpp; + } + } + + return bpp; +} + +/* Adjust link config limits based on compliance test requests. */ +void +intel_dp_adjust_compliance_config(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + struct link_config_limits *limits) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + /* For DP Compliance we override the computed bpp for the pipe */ + if (intel_dp->compliance.test_data.bpc != 0) { + int bpp = 3 * intel_dp->compliance.test_data.bpc; + + limits->min_bpp = limits->max_bpp = bpp; + pipe_config->dither_force_disable = bpp == 6 * 3; + + drm_dbg_kms(&i915->drm, "Setting pipe_bpp to %d\n", bpp); + } + + /* Use values requested by Compliance Test Request */ + if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) { + int index; + + /* Validate the compliance test data since max values + * might have changed due to link train fallback. + */ + if (intel_dp_link_params_valid(intel_dp, intel_dp->compliance.test_link_rate, + intel_dp->compliance.test_lane_count)) { + index = intel_dp_rate_index(intel_dp->common_rates, + intel_dp->num_common_rates, + intel_dp->compliance.test_link_rate); + if (index >= 0) + limits->min_clock = limits->max_clock = index; + limits->min_lane_count = limits->max_lane_count = + intel_dp->compliance.test_lane_count; + } + } +} + +static int intel_dp_output_bpp(const struct intel_crtc_state *crtc_state, int bpp) +{ + /* + * bpp value was assumed to RGB format. And YCbCr 4:2:0 output + * format of the number of bytes per pixel will be half the number + * of bytes of RGB pixel. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) + bpp /= 2; + + return bpp; +} + +/* Optimize link config in order: max bpp, min clock, min lanes */ +static int +intel_dp_compute_link_config_wide(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + const struct link_config_limits *limits) +{ + struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; + int bpp, clock, lane_count; + int mode_rate, link_clock, link_avail; + + for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) { + int output_bpp = intel_dp_output_bpp(pipe_config, bpp); + + mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock, + output_bpp); + + for (clock = limits->min_clock; clock <= limits->max_clock; clock++) { + for (lane_count = limits->min_lane_count; + lane_count <= limits->max_lane_count; + lane_count <<= 1) { + link_clock = intel_dp->common_rates[clock]; + link_avail = intel_dp_max_data_rate(link_clock, + lane_count); + + if (mode_rate <= link_avail) { + pipe_config->lane_count = lane_count; + pipe_config->pipe_bpp = bpp; + pipe_config->port_clock = link_clock; + + return 0; + } + } + } + } + + return -EINVAL; +} + +static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc) +{ + int i, num_bpc; + u8 dsc_bpc[3] = {0}; + + num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd, + dsc_bpc); + for (i = 0; i < num_bpc; i++) { + if (dsc_max_bpc >= dsc_bpc[i]) + return dsc_bpc[i] * 3; + } + + return 0; +} + +#define DSC_SUPPORTED_VERSION_MIN 1 + +static int intel_dp_dsc_compute_params(struct intel_encoder *encoder, + struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config; + u8 line_buf_depth; + int ret; + + ret = intel_dsc_compute_params(encoder, crtc_state); + if (ret) + return ret; + + /* + * Slice Height of 8 works for all currently available panels. So start + * with that if pic_height is an integral multiple of 8. Eventually add + * logic to try multiple slice heights. + */ + if (vdsc_cfg->pic_height % 8 == 0) + vdsc_cfg->slice_height = 8; + else if (vdsc_cfg->pic_height % 4 == 0) + vdsc_cfg->slice_height = 4; + else + vdsc_cfg->slice_height = 2; + + vdsc_cfg->dsc_version_major = + (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & + DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT; + vdsc_cfg->dsc_version_minor = + min(DSC_SUPPORTED_VERSION_MIN, + (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & + DP_DSC_MINOR_MASK) >> DP_DSC_MINOR_SHIFT); + + vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] & + DP_DSC_RGB; + + line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd); + if (!line_buf_depth) { + drm_dbg_kms(&i915->drm, + "DSC Sink Line Buffer Depth invalid\n"); + return -EINVAL; + } + + if (vdsc_cfg->dsc_version_minor == 2) + vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ? + DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth; + else + vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ? + DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth; + + vdsc_cfg->block_pred_enable = + intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] & + DP_DSC_BLK_PREDICTION_IS_SUPPORTED; + + return drm_dsc_compute_rc_parameters(vdsc_cfg); +} + +static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + struct drm_connector_state *conn_state, + struct link_config_limits *limits) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + const struct drm_display_mode *adjusted_mode = + &pipe_config->hw.adjusted_mode; + u8 dsc_max_bpc; + int pipe_bpp; + int ret; + + pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) && + intel_dp_supports_fec(intel_dp, pipe_config); + + if (!intel_dp_supports_dsc(intel_dp, pipe_config)) + return -EINVAL; + + /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */ + if (INTEL_GEN(dev_priv) >= 12) + dsc_max_bpc = min_t(u8, 12, conn_state->max_requested_bpc); + else + dsc_max_bpc = min_t(u8, 10, + conn_state->max_requested_bpc); + + pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc); + + /* Min Input BPC for ICL+ is 8 */ + if (pipe_bpp < 8 * 3) { + drm_dbg_kms(&dev_priv->drm, + "No DSC support for less than 8bpc\n"); + return -EINVAL; + } + + /* + * For now enable DSC for max bpp, max link rate, max lane count. + * Optimize this later for the minimum possible link rate/lane count + * with DSC enabled for the requested mode. + */ + pipe_config->pipe_bpp = pipe_bpp; + pipe_config->port_clock = intel_dp->common_rates[limits->max_clock]; + pipe_config->lane_count = limits->max_lane_count; + + if (intel_dp_is_edp(intel_dp)) { + pipe_config->dsc.compressed_bpp = + min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4, + pipe_config->pipe_bpp); + pipe_config->dsc.slice_count = + drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, + true); + if (!pipe_config->dsc.slice_count) { + drm_dbg_kms(&dev_priv->drm, "Unsupported Slice Count %d\n", + pipe_config->dsc.slice_count); + return -EINVAL; + } + } else { + u16 dsc_max_output_bpp; + u8 dsc_dp_slice_count; + + dsc_max_output_bpp = + intel_dp_dsc_get_output_bpp(dev_priv, + pipe_config->port_clock, + pipe_config->lane_count, + adjusted_mode->crtc_clock, + adjusted_mode->crtc_hdisplay); + dsc_dp_slice_count = + intel_dp_dsc_get_slice_count(intel_dp, + adjusted_mode->crtc_clock, + adjusted_mode->crtc_hdisplay); + if (!dsc_max_output_bpp || !dsc_dp_slice_count) { + drm_dbg_kms(&dev_priv->drm, + "Compressed BPP/Slice Count not supported\n"); + return -EINVAL; + } + pipe_config->dsc.compressed_bpp = min_t(u16, + dsc_max_output_bpp >> 4, + pipe_config->pipe_bpp); + pipe_config->dsc.slice_count = dsc_dp_slice_count; + } + /* + * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate + * is greater than the maximum Cdclock and if slice count is even + * then we need to use 2 VDSC instances. + */ + if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) { + if (pipe_config->dsc.slice_count > 1) { + pipe_config->dsc.dsc_split = true; + } else { + drm_dbg_kms(&dev_priv->drm, + "Cannot split stream to use 2 VDSC instances\n"); + return -EINVAL; + } + } + + ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config); + if (ret < 0) { + drm_dbg_kms(&dev_priv->drm, + "Cannot compute valid DSC parameters for Input Bpp = %d " + "Compressed BPP = %d\n", + pipe_config->pipe_bpp, + pipe_config->dsc.compressed_bpp); + return ret; + } + + pipe_config->dsc.compression_enable = true; + drm_dbg_kms(&dev_priv->drm, "DP DSC computed with Input Bpp = %d " + "Compressed Bpp = %d Slice Count = %d\n", + pipe_config->pipe_bpp, + pipe_config->dsc.compressed_bpp, + pipe_config->dsc.slice_count); + + return 0; +} + +int intel_dp_min_bpp(const struct intel_crtc_state *crtc_state) +{ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_RGB) + return 6 * 3; + else + return 8 * 3; +} + +static int +intel_dp_compute_link_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config, + struct drm_connector_state *conn_state) +{ + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + const struct drm_display_mode *adjusted_mode = + &pipe_config->hw.adjusted_mode; + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct link_config_limits limits; + int common_len; + int ret; + + common_len = intel_dp_common_len_rate_limit(intel_dp, + intel_dp->max_link_rate); + + /* No common link rates between source and sink */ + drm_WARN_ON(encoder->base.dev, common_len <= 0); + + limits.min_clock = 0; + limits.max_clock = common_len - 1; + + limits.min_lane_count = 1; + limits.max_lane_count = intel_dp_max_lane_count(intel_dp); + + limits.min_bpp = intel_dp_min_bpp(pipe_config); + limits.max_bpp = intel_dp_max_bpp(intel_dp, pipe_config); + + if (intel_dp_is_edp(intel_dp)) { + /* + * Use the maximum clock and number of lanes the eDP panel + * advertizes being capable of. The panels are generally + * designed to support only a single clock and lane + * configuration, and typically these values correspond to the + * native resolution of the panel. + */ + limits.min_lane_count = limits.max_lane_count; + limits.min_clock = limits.max_clock; + } + + intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits); + + drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i " + "max rate %d max bpp %d pixel clock %iKHz\n", + limits.max_lane_count, + intel_dp->common_rates[limits.max_clock], + limits.max_bpp, adjusted_mode->crtc_clock); + + /* + * Optimize for slow and wide. This is the place to add alternative + * optimization policy. + */ + ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits); + + /* enable compression if the mode doesn't fit available BW */ + drm_dbg_kms(&i915->drm, "Force DSC en = %d\n", intel_dp->force_dsc_en); + if (ret || intel_dp->force_dsc_en) { + ret = intel_dp_dsc_compute_config(intel_dp, pipe_config, + conn_state, &limits); + if (ret < 0) + return ret; + } + + if (pipe_config->dsc.compression_enable) { + drm_dbg_kms(&i915->drm, + "DP lane count %d clock %d Input bpp %d Compressed bpp %d\n", + pipe_config->lane_count, pipe_config->port_clock, + pipe_config->pipe_bpp, + pipe_config->dsc.compressed_bpp); + + drm_dbg_kms(&i915->drm, + "DP link rate required %i available %i\n", + intel_dp_link_required(adjusted_mode->crtc_clock, + pipe_config->dsc.compressed_bpp), + intel_dp_max_data_rate(pipe_config->port_clock, + pipe_config->lane_count)); + } else { + drm_dbg_kms(&i915->drm, "DP lane count %d clock %d bpp %d\n", + pipe_config->lane_count, pipe_config->port_clock, + pipe_config->pipe_bpp); + + drm_dbg_kms(&i915->drm, + "DP link rate required %i available %i\n", + intel_dp_link_required(adjusted_mode->crtc_clock, + pipe_config->pipe_bpp), + intel_dp_max_data_rate(pipe_config->port_clock, + pipe_config->lane_count)); + } + return 0; +} + +static int +intel_dp_ycbcr420_config(struct intel_dp *intel_dp, + struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_connector *connector = conn_state->connector; + const struct drm_display_info *info = &connector->display_info; + const struct drm_display_mode *adjusted_mode = + &crtc_state->hw.adjusted_mode; + + if (!connector->ycbcr_420_allowed) + return 0; + + if (!drm_mode_is_420_only(info, adjusted_mode)) + return 0; + + if (intel_dp->dfp.ycbcr_444_to_420) { + crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR444; + return 0; + } + + crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420; + + return intel_pch_panel_fitting(crtc_state, conn_state); +} + +bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + const struct intel_digital_connector_state *intel_conn_state = + to_intel_digital_connector_state(conn_state); + const struct drm_display_mode *adjusted_mode = + &crtc_state->hw.adjusted_mode; + + /* + * Our YCbCr output is always limited range. + * crtc_state->limited_color_range only applies to RGB, + * and it must never be set for YCbCr or we risk setting + * some conflicting bits in PIPECONF which will mess up + * the colors on the monitor. + */ + if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) + return false; + + if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) { + /* + * See: + * CEA-861-E - 5.1 Default Encoding Parameters + * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry + */ + return crtc_state->pipe_bpp != 18 && + drm_default_rgb_quant_range(adjusted_mode) == + HDMI_QUANTIZATION_RANGE_LIMITED; + } else { + return intel_conn_state->broadcast_rgb == + INTEL_BROADCAST_RGB_LIMITED; + } +} + +static bool intel_dp_port_has_audio(struct drm_i915_private *dev_priv, + enum port port) +{ + if (IS_G4X(dev_priv)) + return false; + if (INTEL_GEN(dev_priv) < 12 && port == PORT_A) + return false; + + return true; +} + +static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state, + struct drm_dp_vsc_sdp *vsc) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + + /* + * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 + * VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/ + * Colorimetry Format indication. + */ + vsc->revision = 0x5; + vsc->length = 0x13; + + /* DP 1.4a spec, Table 2-120 */ + switch (crtc_state->output_format) { + case INTEL_OUTPUT_FORMAT_YCBCR444: + vsc->pixelformat = DP_PIXELFORMAT_YUV444; + break; + case INTEL_OUTPUT_FORMAT_YCBCR420: + vsc->pixelformat = DP_PIXELFORMAT_YUV420; + break; + case INTEL_OUTPUT_FORMAT_RGB: + default: + vsc->pixelformat = DP_PIXELFORMAT_RGB; + } + + switch (conn_state->colorspace) { + case DRM_MODE_COLORIMETRY_BT709_YCC: + vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; + break; + case DRM_MODE_COLORIMETRY_XVYCC_601: + vsc->colorimetry = DP_COLORIMETRY_XVYCC_601; + break; + case DRM_MODE_COLORIMETRY_XVYCC_709: + vsc->colorimetry = DP_COLORIMETRY_XVYCC_709; + break; + case DRM_MODE_COLORIMETRY_SYCC_601: + vsc->colorimetry = DP_COLORIMETRY_SYCC_601; + break; + case DRM_MODE_COLORIMETRY_OPYCC_601: + vsc->colorimetry = DP_COLORIMETRY_OPYCC_601; + break; + case DRM_MODE_COLORIMETRY_BT2020_CYCC: + vsc->colorimetry = DP_COLORIMETRY_BT2020_CYCC; + break; + case DRM_MODE_COLORIMETRY_BT2020_RGB: + vsc->colorimetry = DP_COLORIMETRY_BT2020_RGB; + break; + case DRM_MODE_COLORIMETRY_BT2020_YCC: + vsc->colorimetry = DP_COLORIMETRY_BT2020_YCC; + break; + case DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65: + case DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER: + vsc->colorimetry = DP_COLORIMETRY_DCI_P3_RGB; + break; + default: + /* + * RGB->YCBCR color conversion uses the BT.709 + * color space. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) + vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; + else + vsc->colorimetry = DP_COLORIMETRY_DEFAULT; + break; + } + + vsc->bpc = crtc_state->pipe_bpp / 3; + + /* only RGB pixelformat supports 6 bpc */ + drm_WARN_ON(&dev_priv->drm, + vsc->bpc == 6 && vsc->pixelformat != DP_PIXELFORMAT_RGB); + + /* all YCbCr are always limited range */ + vsc->dynamic_range = DP_DYNAMIC_RANGE_CTA; + vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED; +} + +static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp, + struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_dp_vsc_sdp *vsc = &crtc_state->infoframes.vsc; + + /* When a crtc state has PSR, VSC SDP will be handled by PSR routine */ + if (crtc_state->has_psr) + return; + + if (!intel_dp_needs_vsc_sdp(crtc_state, conn_state)) + return; + + crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC); + vsc->sdp_type = DP_SDP_VSC; + intel_dp_compute_vsc_colorimetry(crtc_state, conn_state, + &crtc_state->infoframes.vsc); +} + +void intel_dp_compute_psr_vsc_sdp(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state, + struct drm_dp_vsc_sdp *vsc) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + vsc->sdp_type = DP_SDP_VSC; + + if (dev_priv->psr.psr2_enabled) { + if (dev_priv->psr.colorimetry_support && + intel_dp_needs_vsc_sdp(crtc_state, conn_state)) { + /* [PSR2, +Colorimetry] */ + intel_dp_compute_vsc_colorimetry(crtc_state, conn_state, + vsc); + } else { + /* + * [PSR2, -Colorimetry] + * Prepare VSC Header for SU as per eDP 1.4 spec, Table 6-11 + * 3D stereo + PSR/PSR2 + Y-coordinate. + */ + vsc->revision = 0x4; + vsc->length = 0xe; + } + } else { + /* + * [PSR1] + * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 + * VSC SDP supporting 3D stereo + PSR (applies to eDP v1.3 or + * higher). + */ + vsc->revision = 0x2; + vsc->length = 0x8; + } +} + +static void +intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp, + struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + int ret; + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct hdmi_drm_infoframe *drm_infoframe = &crtc_state->infoframes.drm.drm; + + if (!conn_state->hdr_output_metadata) + return; + + ret = drm_hdmi_infoframe_set_hdr_metadata(drm_infoframe, conn_state); + + if (ret) { + drm_dbg_kms(&dev_priv->drm, "couldn't set HDR metadata in infoframe\n"); + return; + } + + crtc_state->infoframes.enable |= + intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA); +} + +static void +intel_dp_drrs_compute_config(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + int output_bpp, bool constant_n) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + /* + * DRRS and PSR can't be enable together, so giving preference to PSR + * as it allows more power-savings by complete shutting down display, + * so to guarantee this, intel_dp_drrs_compute_config() must be called + * after intel_psr_compute_config(). + */ + if (pipe_config->has_psr) + return; + + if (!intel_connector->panel.downclock_mode || + dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT) + return; + + pipe_config->has_drrs = true; + intel_link_compute_m_n(output_bpp, pipe_config->lane_count, + intel_connector->panel.downclock_mode->clock, + pipe_config->port_clock, &pipe_config->dp_m2_n2, + constant_n, pipe_config->fec_enable); +} + +int +intel_dp_compute_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config, + struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder); + enum port port = encoder->port; + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct intel_digital_connector_state *intel_conn_state = + to_intel_digital_connector_state(conn_state); + bool constant_n = drm_dp_has_quirk(&intel_dp->desc, 0, + DP_DPCD_QUIRK_CONSTANT_N); + int ret = 0, output_bpp; + + if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A) + pipe_config->has_pch_encoder = true; + + pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; + + if (lspcon->active) + lspcon_ycbcr420_config(&intel_connector->base, pipe_config); + else + ret = intel_dp_ycbcr420_config(intel_dp, pipe_config, + conn_state); + if (ret) + return ret; + + if (!intel_dp_port_has_audio(dev_priv, port)) + pipe_config->has_audio = false; + else if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO) + pipe_config->has_audio = intel_dp->has_audio; + else + pipe_config->has_audio = intel_conn_state->force_audio == HDMI_AUDIO_ON; + + if (intel_dp_is_edp(intel_dp) && intel_connector->panel.fixed_mode) { + intel_fixed_panel_mode(intel_connector->panel.fixed_mode, + adjusted_mode); + + if (HAS_GMCH(dev_priv)) + ret = intel_gmch_panel_fitting(pipe_config, conn_state); + else + ret = intel_pch_panel_fitting(pipe_config, conn_state); + if (ret) + return ret; + } + + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) + return -EINVAL; + + if (HAS_GMCH(dev_priv) && + adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) + return -EINVAL; + + if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) + return -EINVAL; + + if (intel_dp_hdisplay_bad(dev_priv, adjusted_mode->crtc_hdisplay)) + return -EINVAL; + + ret = intel_dp_compute_link_config(encoder, pipe_config, conn_state); + if (ret < 0) + return ret; + + pipe_config->limited_color_range = + intel_dp_limited_color_range(pipe_config, conn_state); + + if (pipe_config->dsc.compression_enable) + output_bpp = pipe_config->dsc.compressed_bpp; + else + output_bpp = intel_dp_output_bpp(pipe_config, pipe_config->pipe_bpp); + + intel_link_compute_m_n(output_bpp, + pipe_config->lane_count, + adjusted_mode->crtc_clock, + pipe_config->port_clock, + &pipe_config->dp_m_n, + constant_n, pipe_config->fec_enable); + + if (!HAS_DDI(dev_priv)) + intel_dp_set_clock(encoder, pipe_config); + + intel_psr_compute_config(intel_dp, pipe_config); + intel_dp_drrs_compute_config(intel_dp, pipe_config, output_bpp, + constant_n); + intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state); + intel_dp_compute_hdr_metadata_infoframe_sdp(intel_dp, pipe_config, conn_state); + + return 0; +} + +void intel_dp_set_link_params(struct intel_dp *intel_dp, + int link_rate, u8 lane_count, + bool link_mst) +{ + intel_dp->link_trained = false; + intel_dp->link_rate = link_rate; + intel_dp->lane_count = lane_count; + intel_dp->link_mst = link_mst; +} + +static void intel_dp_prepare(struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + enum port port = encoder->port; + struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); + const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; + + intel_dp_set_link_params(intel_dp, pipe_config->port_clock, + pipe_config->lane_count, + intel_crtc_has_type(pipe_config, + INTEL_OUTPUT_DP_MST)); + + /* + * There are four kinds of DP registers: + * + * IBX PCH + * SNB CPU + * IVB CPU + * CPT PCH + * + * IBX PCH and CPU are the same for almost everything, + * except that the CPU DP PLL is configured in this + * register + * + * CPT PCH is quite different, having many bits moved + * to the TRANS_DP_CTL register instead. That + * configuration happens (oddly) in ilk_pch_enable + */ + + /* Preserve the BIOS-computed detected bit. This is + * supposed to be read-only. + */ + intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg) & DP_DETECTED; + + /* Handle DP bits in common between all three register formats */ + intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + intel_dp->DP |= DP_PORT_WIDTH(pipe_config->lane_count); + + /* Split out the IBX/CPU vs CPT settings */ + + if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) { + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; + + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + intel_dp->DP |= DP_PIPE_SEL_IVB(crtc->pipe); + } else if (HAS_PCH_CPT(dev_priv) && port != PORT_A) { + u32 trans_dp; + + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; + + trans_dp = intel_de_read(dev_priv, TRANS_DP_CTL(crtc->pipe)); + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) + trans_dp |= TRANS_DP_ENH_FRAMING; + else + trans_dp &= ~TRANS_DP_ENH_FRAMING; + intel_de_write(dev_priv, TRANS_DP_CTL(crtc->pipe), trans_dp); + } else { + if (IS_G4X(dev_priv) && pipe_config->limited_color_range) + intel_dp->DP |= DP_COLOR_RANGE_16_235; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + if (IS_CHERRYVIEW(dev_priv)) + intel_dp->DP |= DP_PIPE_SEL_CHV(crtc->pipe); + else + intel_dp->DP |= DP_PIPE_SEL(crtc->pipe); + } +} + +#define IDLE_ON_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK) +#define IDLE_ON_VALUE (PP_ON | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE) + +#define IDLE_OFF_MASK (PP_ON | PP_SEQUENCE_MASK | 0 | 0) +#define IDLE_OFF_VALUE (0 | PP_SEQUENCE_NONE | 0 | 0) + +#define IDLE_CYCLE_MASK (PP_ON | PP_SEQUENCE_MASK | PP_CYCLE_DELAY_ACTIVE | PP_SEQUENCE_STATE_MASK) +#define IDLE_CYCLE_VALUE (0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_OFF_IDLE) + +static void intel_pps_verify_state(struct intel_dp *intel_dp); + +static void wait_panel_status(struct intel_dp *intel_dp, + u32 mask, + u32 value) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + i915_reg_t pp_stat_reg, pp_ctrl_reg; + + lockdep_assert_held(&dev_priv->pps_mutex); + + intel_pps_verify_state(intel_dp); + + pp_stat_reg = _pp_stat_reg(intel_dp); + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + drm_dbg_kms(&dev_priv->drm, + "mask %08x value %08x status %08x control %08x\n", + mask, value, + intel_de_read(dev_priv, pp_stat_reg), + intel_de_read(dev_priv, pp_ctrl_reg)); + + if (intel_de_wait_for_register(dev_priv, pp_stat_reg, + mask, value, 5000)) + drm_err(&dev_priv->drm, + "Panel status timeout: status %08x control %08x\n", + intel_de_read(dev_priv, pp_stat_reg), + intel_de_read(dev_priv, pp_ctrl_reg)); + + drm_dbg_kms(&dev_priv->drm, "Wait complete\n"); +} + +static void wait_panel_on(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + drm_dbg_kms(&i915->drm, "Wait for panel power on\n"); + wait_panel_status(intel_dp, IDLE_ON_MASK, IDLE_ON_VALUE); +} + +static void wait_panel_off(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + drm_dbg_kms(&i915->drm, "Wait for panel power off time\n"); + wait_panel_status(intel_dp, IDLE_OFF_MASK, IDLE_OFF_VALUE); +} + +static void wait_panel_power_cycle(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + ktime_t panel_power_on_time; + s64 panel_power_off_duration; + + drm_dbg_kms(&i915->drm, "Wait for panel power cycle\n"); + + /* take the difference of currrent time and panel power off time + * and then make panel wait for t11_t12 if needed. */ + panel_power_on_time = ktime_get_boottime(); + panel_power_off_duration = ktime_ms_delta(panel_power_on_time, intel_dp->panel_power_off_time); + + /* When we disable the VDD override bit last we have to do the manual + * wait. */ + if (panel_power_off_duration < (s64)intel_dp->panel_power_cycle_delay) + wait_remaining_ms_from_jiffies(jiffies, + intel_dp->panel_power_cycle_delay - panel_power_off_duration); + + wait_panel_status(intel_dp, IDLE_CYCLE_MASK, IDLE_CYCLE_VALUE); +} + +static void wait_backlight_on(struct intel_dp *intel_dp) +{ + wait_remaining_ms_from_jiffies(intel_dp->last_power_on, + intel_dp->backlight_on_delay); +} + +static void edp_wait_backlight_off(struct intel_dp *intel_dp) +{ + wait_remaining_ms_from_jiffies(intel_dp->last_backlight_off, + intel_dp->backlight_off_delay); +} + +/* Read the current pp_control value, unlocking the register if it + * is locked + */ + +static u32 ilk_get_pp_control(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u32 control; + + lockdep_assert_held(&dev_priv->pps_mutex); + + control = intel_de_read(dev_priv, _pp_ctrl_reg(intel_dp)); + if (drm_WARN_ON(&dev_priv->drm, !HAS_DDI(dev_priv) && + (control & PANEL_UNLOCK_MASK) != PANEL_UNLOCK_REGS)) { + control &= ~PANEL_UNLOCK_MASK; + control |= PANEL_UNLOCK_REGS; + } + return control; +} + +/* + * Must be paired with edp_panel_vdd_off(). + * Must hold pps_mutex around the whole on/off sequence. + * Can be nested with intel_edp_panel_vdd_{on,off}() calls. + */ +static bool edp_panel_vdd_on(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + u32 pp; + i915_reg_t pp_stat_reg, pp_ctrl_reg; + bool need_to_disable = !intel_dp->want_panel_vdd; + + lockdep_assert_held(&dev_priv->pps_mutex); + + if (!intel_dp_is_edp(intel_dp)) + return false; + + cancel_delayed_work(&intel_dp->panel_vdd_work); + intel_dp->want_panel_vdd = true; + + if (edp_have_panel_vdd(intel_dp)) + return need_to_disable; + + intel_display_power_get(dev_priv, + intel_aux_power_domain(dig_port)); + + drm_dbg_kms(&dev_priv->drm, "Turning [ENCODER:%d:%s] VDD on\n", + dig_port->base.base.base.id, + dig_port->base.base.name); + + if (!edp_have_panel_power(intel_dp)) + wait_panel_power_cycle(intel_dp); + + pp = ilk_get_pp_control(intel_dp); + pp |= EDP_FORCE_VDD; + + pp_stat_reg = _pp_stat_reg(intel_dp); + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + drm_dbg_kms(&dev_priv->drm, "PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", + intel_de_read(dev_priv, pp_stat_reg), + intel_de_read(dev_priv, pp_ctrl_reg)); + /* + * If the panel wasn't on, delay before accessing aux channel + */ + if (!edp_have_panel_power(intel_dp)) { + drm_dbg_kms(&dev_priv->drm, + "[ENCODER:%d:%s] panel power wasn't enabled\n", + dig_port->base.base.base.id, + dig_port->base.base.name); + msleep(intel_dp->panel_power_up_delay); + } + + return need_to_disable; +} + +/* + * Must be paired with intel_edp_panel_vdd_off() or + * intel_edp_panel_off(). + * Nested calls to these functions are not allowed since + * we drop the lock. Caller must use some higher level + * locking to prevent nested calls from other threads. + */ +void intel_edp_panel_vdd_on(struct intel_dp *intel_dp) +{ + intel_wakeref_t wakeref; + bool vdd; + + if (!intel_dp_is_edp(intel_dp)) + return; + + vdd = false; + with_pps_lock(intel_dp, wakeref) + vdd = edp_panel_vdd_on(intel_dp); + I915_STATE_WARN(!vdd, "[ENCODER:%d:%s] VDD already requested on\n", + dp_to_dig_port(intel_dp)->base.base.base.id, + dp_to_dig_port(intel_dp)->base.base.name); +} + +static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = + dp_to_dig_port(intel_dp); + u32 pp; + i915_reg_t pp_stat_reg, pp_ctrl_reg; + + lockdep_assert_held(&dev_priv->pps_mutex); + + drm_WARN_ON(&dev_priv->drm, intel_dp->want_panel_vdd); + + if (!edp_have_panel_vdd(intel_dp)) + return; + + drm_dbg_kms(&dev_priv->drm, "Turning [ENCODER:%d:%s] VDD off\n", + dig_port->base.base.base.id, + dig_port->base.base.name); + + pp = ilk_get_pp_control(intel_dp); + pp &= ~EDP_FORCE_VDD; + + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + pp_stat_reg = _pp_stat_reg(intel_dp); + + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + + /* Make sure sequencer is idle before allowing subsequent activity */ + drm_dbg_kms(&dev_priv->drm, "PP_STATUS: 0x%08x PP_CONTROL: 0x%08x\n", + intel_de_read(dev_priv, pp_stat_reg), + intel_de_read(dev_priv, pp_ctrl_reg)); + + if ((pp & PANEL_POWER_ON) == 0) + intel_dp->panel_power_off_time = ktime_get_boottime(); + + intel_display_power_put_unchecked(dev_priv, + intel_aux_power_domain(dig_port)); +} + +static void edp_panel_vdd_work(struct work_struct *__work) +{ + struct intel_dp *intel_dp = + container_of(to_delayed_work(__work), + struct intel_dp, panel_vdd_work); + intel_wakeref_t wakeref; + + with_pps_lock(intel_dp, wakeref) { + if (!intel_dp->want_panel_vdd) + edp_panel_vdd_off_sync(intel_dp); + } +} + +static void edp_panel_vdd_schedule_off(struct intel_dp *intel_dp) +{ + unsigned long delay; + + /* + * Queue the timer to fire a long time from now (relative to the power + * down delay) to keep the panel power up across a sequence of + * operations. + */ + delay = msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5); + schedule_delayed_work(&intel_dp->panel_vdd_work, delay); +} + +/* + * Must be paired with edp_panel_vdd_on(). + * Must hold pps_mutex around the whole on/off sequence. + * Can be nested with intel_edp_panel_vdd_{on,off}() calls. + */ +static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + lockdep_assert_held(&dev_priv->pps_mutex); + + if (!intel_dp_is_edp(intel_dp)) + return; + + I915_STATE_WARN(!intel_dp->want_panel_vdd, "[ENCODER:%d:%s] VDD not forced on", + dp_to_dig_port(intel_dp)->base.base.base.id, + dp_to_dig_port(intel_dp)->base.base.name); + + intel_dp->want_panel_vdd = false; + + if (sync) + edp_panel_vdd_off_sync(intel_dp); + else + edp_panel_vdd_schedule_off(intel_dp); +} + +static void edp_panel_on(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u32 pp; + i915_reg_t pp_ctrl_reg; + + lockdep_assert_held(&dev_priv->pps_mutex); + + if (!intel_dp_is_edp(intel_dp)) + return; + + drm_dbg_kms(&dev_priv->drm, "Turn [ENCODER:%d:%s] panel power on\n", + dp_to_dig_port(intel_dp)->base.base.base.id, + dp_to_dig_port(intel_dp)->base.base.name); + + if (drm_WARN(&dev_priv->drm, edp_have_panel_power(intel_dp), + "[ENCODER:%d:%s] panel power already on\n", + dp_to_dig_port(intel_dp)->base.base.base.id, + dp_to_dig_port(intel_dp)->base.base.name)) + return; + + wait_panel_power_cycle(intel_dp); + + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + pp = ilk_get_pp_control(intel_dp); + if (IS_GEN(dev_priv, 5)) { + /* ILK workaround: disable reset around power sequence */ + pp &= ~PANEL_POWER_RESET; + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + } + + pp |= PANEL_POWER_ON; + if (!IS_GEN(dev_priv, 5)) + pp |= PANEL_POWER_RESET; + + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + + wait_panel_on(intel_dp); + intel_dp->last_power_on = jiffies; + + if (IS_GEN(dev_priv, 5)) { + pp |= PANEL_POWER_RESET; /* restore panel reset bit */ + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + } +} + +void intel_edp_panel_on(struct intel_dp *intel_dp) +{ + intel_wakeref_t wakeref; + + if (!intel_dp_is_edp(intel_dp)) + return; + + with_pps_lock(intel_dp, wakeref) + edp_panel_on(intel_dp); +} + + +static void edp_panel_off(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + u32 pp; + i915_reg_t pp_ctrl_reg; + + lockdep_assert_held(&dev_priv->pps_mutex); + + if (!intel_dp_is_edp(intel_dp)) + return; + + drm_dbg_kms(&dev_priv->drm, "Turn [ENCODER:%d:%s] panel power off\n", + dig_port->base.base.base.id, dig_port->base.base.name); + + drm_WARN(&dev_priv->drm, !intel_dp->want_panel_vdd, + "Need [ENCODER:%d:%s] VDD to turn off panel\n", + dig_port->base.base.base.id, dig_port->base.base.name); + + pp = ilk_get_pp_control(intel_dp); + /* We need to switch off panel power _and_ force vdd, for otherwise some + * panels get very unhappy and cease to work. */ + pp &= ~(PANEL_POWER_ON | PANEL_POWER_RESET | EDP_FORCE_VDD | + EDP_BLC_ENABLE); + + pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + + intel_dp->want_panel_vdd = false; + + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + + wait_panel_off(intel_dp); + intel_dp->panel_power_off_time = ktime_get_boottime(); + + /* We got a reference when we enabled the VDD. */ + intel_display_power_put_unchecked(dev_priv, intel_aux_power_domain(dig_port)); +} + +void intel_edp_panel_off(struct intel_dp *intel_dp) +{ + intel_wakeref_t wakeref; + + if (!intel_dp_is_edp(intel_dp)) + return; + + with_pps_lock(intel_dp, wakeref) + edp_panel_off(intel_dp); +} + +/* Enable backlight in the panel power control. */ +static void _intel_edp_backlight_on(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + intel_wakeref_t wakeref; + + /* + * If we enable the backlight right away following a panel power + * on, we may see slight flicker as the panel syncs with the eDP + * link. So delay a bit to make sure the image is solid before + * allowing it to appear. + */ + wait_backlight_on(intel_dp); + + with_pps_lock(intel_dp, wakeref) { + i915_reg_t pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + u32 pp; + + pp = ilk_get_pp_control(intel_dp); + pp |= EDP_BLC_ENABLE; + + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + } +} + +/* Enable backlight PWM and backlight PP control. */ +void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(conn_state->best_encoder)); + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + if (!intel_dp_is_edp(intel_dp)) + return; + + drm_dbg_kms(&i915->drm, "\n"); + + intel_panel_enable_backlight(crtc_state, conn_state); + _intel_edp_backlight_on(intel_dp); +} + +/* Disable backlight in the panel power control. */ +static void _intel_edp_backlight_off(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + intel_wakeref_t wakeref; + + if (!intel_dp_is_edp(intel_dp)) + return; + + with_pps_lock(intel_dp, wakeref) { + i915_reg_t pp_ctrl_reg = _pp_ctrl_reg(intel_dp); + u32 pp; + + pp = ilk_get_pp_control(intel_dp); + pp &= ~EDP_BLC_ENABLE; + + intel_de_write(dev_priv, pp_ctrl_reg, pp); + intel_de_posting_read(dev_priv, pp_ctrl_reg); + } + + intel_dp->last_backlight_off = jiffies; + edp_wait_backlight_off(intel_dp); +} + +/* Disable backlight PP control and backlight PWM. */ +void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder)); + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + if (!intel_dp_is_edp(intel_dp)) + return; + + drm_dbg_kms(&i915->drm, "\n"); + + _intel_edp_backlight_off(intel_dp); + intel_panel_disable_backlight(old_conn_state); +} + +/* + * Hook for controlling the panel power control backlight through the bl_power + * sysfs attribute. Take care to handle multiple calls. + */ +static void intel_edp_backlight_power(struct intel_connector *connector, + bool enable) +{ + struct drm_i915_private *i915 = to_i915(connector->base.dev); + struct intel_dp *intel_dp = intel_attached_dp(connector); + intel_wakeref_t wakeref; + bool is_enabled; + + is_enabled = false; + with_pps_lock(intel_dp, wakeref) + is_enabled = ilk_get_pp_control(intel_dp) & EDP_BLC_ENABLE; + if (is_enabled == enable) + return; + + drm_dbg_kms(&i915->drm, "panel power control backlight %s\n", + enable ? "enable" : "disable"); + + if (enable) + _intel_edp_backlight_on(intel_dp); + else + _intel_edp_backlight_off(intel_dp); +} + +static void assert_dp_port(struct intel_dp *intel_dp, bool state) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + bool cur_state = intel_de_read(dev_priv, intel_dp->output_reg) & DP_PORT_EN; + + I915_STATE_WARN(cur_state != state, + "[ENCODER:%d:%s] state assertion failure (expected %s, current %s)\n", + dig_port->base.base.base.id, dig_port->base.base.name, + onoff(state), onoff(cur_state)); +} +#define assert_dp_port_disabled(d) assert_dp_port((d), false) + +static void assert_edp_pll(struct drm_i915_private *dev_priv, bool state) +{ + bool cur_state = intel_de_read(dev_priv, DP_A) & DP_PLL_ENABLE; + + I915_STATE_WARN(cur_state != state, + "eDP PLL state assertion failure (expected %s, current %s)\n", + onoff(state), onoff(cur_state)); +} +#define assert_edp_pll_enabled(d) assert_edp_pll((d), true) +#define assert_edp_pll_disabled(d) assert_edp_pll((d), false) + +static void ilk_edp_pll_on(struct intel_dp *intel_dp, + const struct intel_crtc_state *pipe_config) +{ + struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + + assert_pipe_disabled(dev_priv, pipe_config->cpu_transcoder); + assert_dp_port_disabled(intel_dp); + assert_edp_pll_disabled(dev_priv); + + drm_dbg_kms(&dev_priv->drm, "enabling eDP PLL for clock %d\n", + pipe_config->port_clock); + + intel_dp->DP &= ~DP_PLL_FREQ_MASK; + + if (pipe_config->port_clock == 162000) + intel_dp->DP |= DP_PLL_FREQ_162MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + + intel_de_write(dev_priv, DP_A, intel_dp->DP); + intel_de_posting_read(dev_priv, DP_A); + udelay(500); + + /* + * [DevILK] Work around required when enabling DP PLL + * while a pipe is enabled going to FDI: + * 1. Wait for the start of vertical blank on the enabled pipe going to FDI + * 2. Program DP PLL enable + */ + if (IS_GEN(dev_priv, 5)) + intel_wait_for_vblank_if_active(dev_priv, !crtc->pipe); + + intel_dp->DP |= DP_PLL_ENABLE; + + intel_de_write(dev_priv, DP_A, intel_dp->DP); + intel_de_posting_read(dev_priv, DP_A); + udelay(200); +} + +static void ilk_edp_pll_off(struct intel_dp *intel_dp, + const struct intel_crtc_state *old_crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + + assert_pipe_disabled(dev_priv, old_crtc_state->cpu_transcoder); + assert_dp_port_disabled(intel_dp); + assert_edp_pll_enabled(dev_priv); + + drm_dbg_kms(&dev_priv->drm, "disabling eDP PLL\n"); + + intel_dp->DP &= ~DP_PLL_ENABLE; + + intel_de_write(dev_priv, DP_A, intel_dp->DP); + intel_de_posting_read(dev_priv, DP_A); + udelay(200); +} + +static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp) +{ + /* + * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus + * be capable of signalling downstream hpd with a long pulse. + * Whether or not that means D3 is safe to use is not clear, + * but let's assume so until proven otherwise. + * + * FIXME should really check all downstream ports... + */ + return intel_dp->dpcd[DP_DPCD_REV] == 0x11 && + drm_dp_is_branch(intel_dp->dpcd) && + intel_dp->downstream_ports[0] & DP_DS_PORT_HPD; +} + +void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state, + bool enable) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int ret; + + if (!crtc_state->dsc.compression_enable) + return; + + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_DSC_ENABLE, + enable ? DP_DECOMPRESSION_EN : 0); + if (ret < 0) + drm_dbg_kms(&i915->drm, + "Failed to %s sink decompression state\n", + enable ? "enable" : "disable"); +} + +/* If the device supports it, try to set the power state appropriately */ +void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode) +{ + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; + struct drm_i915_private *i915 = to_i915(encoder->base.dev); + int ret, i; + + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (mode != DP_SET_POWER_D0) { + if (downstream_hpd_needs_d0(intel_dp)) + return; + + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); + } else { + struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp); + + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); + if (ret == 1) + break; + msleep(1); + } + + if (ret == 1 && lspcon->active) + lspcon_wait_pcon_mode(lspcon); + } + + if (ret != 1) + drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Set power to %s failed\n", + encoder->base.base.id, encoder->base.name, + mode == DP_SET_POWER_D0 ? "D0" : "D3"); +} + +static bool cpt_dp_port_selected(struct drm_i915_private *dev_priv, + enum port port, enum pipe *pipe) +{ + enum pipe p; + + for_each_pipe(dev_priv, p) { + u32 val = intel_de_read(dev_priv, TRANS_DP_CTL(p)); + + if ((val & TRANS_DP_PORT_SEL_MASK) == TRANS_DP_PORT_SEL(port)) { + *pipe = p; + return true; + } + } + + drm_dbg_kms(&dev_priv->drm, "No pipe for DP port %c found\n", + port_name(port)); + + /* must initialize pipe to something for the asserts */ + *pipe = PIPE_A; + + return false; +} + +bool intel_dp_port_enabled(struct drm_i915_private *dev_priv, + i915_reg_t dp_reg, enum port port, + enum pipe *pipe) +{ + bool ret; + u32 val; + + val = intel_de_read(dev_priv, dp_reg); + + ret = val & DP_PORT_EN; + + /* asserts want to know the pipe even if the port is disabled */ + if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) + *pipe = (val & DP_PIPE_SEL_MASK_IVB) >> DP_PIPE_SEL_SHIFT_IVB; + else if (HAS_PCH_CPT(dev_priv) && port != PORT_A) + ret &= cpt_dp_port_selected(dev_priv, port, pipe); + else if (IS_CHERRYVIEW(dev_priv)) + *pipe = (val & DP_PIPE_SEL_MASK_CHV) >> DP_PIPE_SEL_SHIFT_CHV; + else + *pipe = (val & DP_PIPE_SEL_MASK) >> DP_PIPE_SEL_SHIFT; + + return ret; +} + +static bool intel_dp_get_hw_state(struct intel_encoder *encoder, + enum pipe *pipe) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + intel_wakeref_t wakeref; + bool ret; + + wakeref = intel_display_power_get_if_enabled(dev_priv, + encoder->power_domain); + if (!wakeref) + return false; + + ret = intel_dp_port_enabled(dev_priv, intel_dp->output_reg, + encoder->port, pipe); + + intel_display_power_put(dev_priv, encoder->power_domain, wakeref); + + return ret; +} + +static void intel_dp_get_config(struct intel_encoder *encoder, + struct intel_crtc_state *pipe_config) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + u32 tmp, flags = 0; + enum port port = encoder->port; + struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); + + if (encoder->type == INTEL_OUTPUT_EDP) + pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP); + else + pipe_config->output_types |= BIT(INTEL_OUTPUT_DP); + + tmp = intel_de_read(dev_priv, intel_dp->output_reg); + + pipe_config->has_audio = tmp & DP_AUDIO_OUTPUT_ENABLE && port != PORT_A; + + if (HAS_PCH_CPT(dev_priv) && port != PORT_A) { + u32 trans_dp = intel_de_read(dev_priv, + TRANS_DP_CTL(crtc->pipe)); + + if (trans_dp & TRANS_DP_HSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + + if (trans_dp & TRANS_DP_VSYNC_ACTIVE_HIGH) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + } else { + if (tmp & DP_SYNC_HS_HIGH) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + + if (tmp & DP_SYNC_VS_HIGH) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + } + + pipe_config->hw.adjusted_mode.flags |= flags; + + if (IS_G4X(dev_priv) && tmp & DP_COLOR_RANGE_16_235) + pipe_config->limited_color_range = true; + + pipe_config->lane_count = + ((tmp & DP_PORT_WIDTH_MASK) >> DP_PORT_WIDTH_SHIFT) + 1; + + intel_dp_get_m_n(crtc, pipe_config); + + if (port == PORT_A) { + if ((intel_de_read(dev_priv, DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_162MHZ) + pipe_config->port_clock = 162000; + else + pipe_config->port_clock = 270000; + } + + pipe_config->hw.adjusted_mode.crtc_clock = + intel_dotclock_calculate(pipe_config->port_clock, + &pipe_config->dp_m_n); + + if (intel_dp_is_edp(intel_dp) && dev_priv->vbt.edp.bpp && + pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { + /* + * This is a big fat ugly hack. + * + * Some machines in UEFI boot mode provide us a VBT that has 18 + * bpp and 1.62 GHz link bandwidth for eDP, which for reasons + * unknown we fail to light up. Yet the same BIOS boots up with + * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as + * max, not what it tells us to use. + * + * Note: This will still be broken if the eDP panel is not lit + * up by the BIOS, and thus we can't get the mode at module + * load. + */ + drm_dbg_kms(&dev_priv->drm, + "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", + pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); + dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; + } +} + +static void intel_disable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + intel_dp->link_trained = false; + + if (old_crtc_state->has_audio) + intel_audio_codec_disable(encoder, + old_crtc_state, old_conn_state); + + /* Make sure the panel is off before trying to change the mode. But also + * ensure that we have vdd while we switch off the panel. */ + intel_edp_panel_vdd_on(intel_dp); + intel_edp_backlight_off(old_conn_state); + intel_dp_set_power(intel_dp, DP_SET_POWER_D3); + intel_edp_panel_off(intel_dp); +} + +static void g4x_disable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + intel_disable_dp(state, encoder, old_crtc_state, old_conn_state); +} + +static void vlv_disable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + intel_disable_dp(state, encoder, old_crtc_state, old_conn_state); +} + +static void g4x_post_disable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + enum port port = encoder->port; + + /* + * Bspec does not list a specific disable sequence for g4x DP. + * Follow the ilk+ sequence (disable pipe before the port) for + * g4x DP as it does not suffer from underruns like the normal + * g4x modeset sequence (disable pipe after the port). + */ + intel_dp_link_down(encoder, old_crtc_state); + + /* Only ilk+ has port A */ + if (port == PORT_A) + ilk_edp_pll_off(intel_dp, old_crtc_state); +} + +static void vlv_post_disable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + intel_dp_link_down(encoder, old_crtc_state); +} + +static void chv_post_disable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + + intel_dp_link_down(encoder, old_crtc_state); + + vlv_dpio_get(dev_priv); + + /* Assert data lane reset */ + chv_data_lane_soft_reset(encoder, old_crtc_state, true); + + vlv_dpio_put(dev_priv); +} + +static void +cpt_set_link_train(struct intel_dp *intel_dp, + u8 dp_train_pat) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u32 *DP = &intel_dp->DP; + + *DP &= ~DP_LINK_TRAIN_MASK_CPT; + + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + *DP |= DP_LINK_TRAIN_OFF_CPT; + break; + case DP_TRAINING_PATTERN_1: + *DP |= DP_LINK_TRAIN_PAT_1_CPT; + break; + case DP_TRAINING_PATTERN_2: + *DP |= DP_LINK_TRAIN_PAT_2_CPT; + break; + case DP_TRAINING_PATTERN_3: + drm_dbg_kms(&dev_priv->drm, + "TPS3 not supported, using TPS2 instead\n"); + *DP |= DP_LINK_TRAIN_PAT_2_CPT; + break; + } + + intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); +} + +static void +g4x_set_link_train(struct intel_dp *intel_dp, + u8 dp_train_pat) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u32 *DP = &intel_dp->DP; + + *DP &= ~DP_LINK_TRAIN_MASK; + + switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) { + case DP_TRAINING_PATTERN_DISABLE: + *DP |= DP_LINK_TRAIN_OFF; + break; + case DP_TRAINING_PATTERN_1: + *DP |= DP_LINK_TRAIN_PAT_1; + break; + case DP_TRAINING_PATTERN_2: + *DP |= DP_LINK_TRAIN_PAT_2; + break; + case DP_TRAINING_PATTERN_3: + drm_dbg_kms(&dev_priv->drm, + "TPS3 not supported, using TPS2 instead\n"); + *DP |= DP_LINK_TRAIN_PAT_2; + break; + } + + intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); +} + +static void intel_dp_enable_port(struct intel_dp *intel_dp, + const struct intel_crtc_state *old_crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + /* enable with pattern 1 (as per spec) */ + + intel_dp_program_link_training_pattern(intel_dp, DP_TRAINING_PATTERN_1); + + /* + * Magic for VLV/CHV. We _must_ first set up the register + * without actually enabling the port, and then do another + * write to enable the port. Otherwise link training will + * fail when the power sequencer is freshly used for this port. + */ + intel_dp->DP |= DP_PORT_EN; + if (old_crtc_state->has_audio) + intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; + + intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); +} + +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 tmp; + + if (intel_dp->dpcd[DP_DPCD_REV] < 0x13) + return; + + if (!drm_dp_is_branch(intel_dp->dpcd)) + return; + + tmp = intel_dp->has_hdmi_sink ? + DP_HDMI_DVI_OUTPUT_CONFIG : 0; + + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_PROTOCOL_CONVERTER_CONTROL_0, tmp) != 1) + drm_dbg_kms(&i915->drm, "Failed to set protocol converter HDMI mode to %s\n", + enableddisabled(intel_dp->has_hdmi_sink)); + + tmp = crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 && + intel_dp->dfp.ycbcr_444_to_420 ? DP_CONVERSION_TO_YCBCR420_ENABLE : 0; + + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_PROTOCOL_CONVERTER_CONTROL_1, tmp) != 1) + drm_dbg_kms(&i915->drm, + "Failed to set protocol converter YCbCr 4:2:0 conversion mode to %s\n", + enableddisabled(intel_dp->dfp.ycbcr_444_to_420)); + + tmp = 0; + + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_PROTOCOL_CONVERTER_CONTROL_2, tmp) <= 0) + drm_dbg_kms(&i915->drm, + "Failed to set protocol converter YCbCr 4:2:2 conversion mode to %s\n", + enableddisabled(false)); +} + +static void intel_enable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); + u32 dp_reg = intel_de_read(dev_priv, intel_dp->output_reg); + enum pipe pipe = crtc->pipe; + intel_wakeref_t wakeref; + + if (drm_WARN_ON(&dev_priv->drm, dp_reg & DP_PORT_EN)) + return; + + with_pps_lock(intel_dp, wakeref) { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + vlv_init_panel_power_sequencer(encoder, pipe_config); + + intel_dp_enable_port(intel_dp, pipe_config); + + edp_panel_vdd_on(intel_dp); + edp_panel_on(intel_dp); + edp_panel_vdd_off(intel_dp, true); + } + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + unsigned int lane_mask = 0x0; + + if (IS_CHERRYVIEW(dev_priv)) + lane_mask = intel_dp_unused_lane_mask(pipe_config->lane_count); + + vlv_wait_port_ready(dev_priv, dp_to_dig_port(intel_dp), + lane_mask); + } + + intel_dp_set_power(intel_dp, DP_SET_POWER_D0); + intel_dp_configure_protocol_converter(intel_dp, pipe_config); + intel_dp_start_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); + + if (pipe_config->has_audio) { + drm_dbg(&dev_priv->drm, "Enabling DP audio on pipe %c\n", + pipe_name(pipe)); + intel_audio_codec_enable(encoder, pipe_config, conn_state); + } +} + +static void g4x_enable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + intel_enable_dp(state, encoder, pipe_config, conn_state); + intel_edp_backlight_on(pipe_config, conn_state); +} + +static void vlv_enable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + intel_edp_backlight_on(pipe_config, conn_state); +} + +static void g4x_pre_enable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + enum port port = encoder->port; + + intel_dp_prepare(encoder, pipe_config); + + /* Only ilk+ has port A */ + if (port == PORT_A) + ilk_edp_pll_on(intel_dp, pipe_config); +} + +static void vlv_detach_power_sequencer(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); + enum pipe pipe = intel_dp->pps_pipe; + i915_reg_t pp_on_reg = PP_ON_DELAYS(pipe); + + drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE); + + if (drm_WARN_ON(&dev_priv->drm, pipe != PIPE_A && pipe != PIPE_B)) + return; + + edp_panel_vdd_off_sync(intel_dp); + + /* + * VLV seems to get confused when multiple power sequencers + * have the same port selected (even if only one has power/vdd + * enabled). The failure manifests as vlv_wait_port_ready() failing + * CHV on the other hand doesn't seem to mind having the same port + * selected in multiple power sequencers, but let's clear the + * port select always when logically disconnecting a power sequencer + * from a port. + */ + drm_dbg_kms(&dev_priv->drm, + "detaching pipe %c power sequencer from [ENCODER:%d:%s]\n", + pipe_name(pipe), dig_port->base.base.base.id, + dig_port->base.base.name); + intel_de_write(dev_priv, pp_on_reg, 0); + intel_de_posting_read(dev_priv, pp_on_reg); + + intel_dp->pps_pipe = INVALID_PIPE; +} + +static void vlv_steal_power_sequencer(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + struct intel_encoder *encoder; + + lockdep_assert_held(&dev_priv->pps_mutex); + + for_each_intel_dp(&dev_priv->drm, encoder) { + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + drm_WARN(&dev_priv->drm, intel_dp->active_pipe == pipe, + "stealing pipe %c power sequencer from active [ENCODER:%d:%s]\n", + pipe_name(pipe), encoder->base.base.id, + encoder->base.name); + + if (intel_dp->pps_pipe != pipe) + continue; + + drm_dbg_kms(&dev_priv->drm, + "stealing pipe %c power sequencer from [ENCODER:%d:%s]\n", + pipe_name(pipe), encoder->base.base.id, + encoder->base.name); + + /* make sure vdd is off before we steal it */ + vlv_detach_power_sequencer(intel_dp); + } +} + +static void vlv_init_panel_power_sequencer(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + + lockdep_assert_held(&dev_priv->pps_mutex); + + drm_WARN_ON(&dev_priv->drm, intel_dp->active_pipe != INVALID_PIPE); + + if (intel_dp->pps_pipe != INVALID_PIPE && + intel_dp->pps_pipe != crtc->pipe) { + /* + * If another power sequencer was being used on this + * port previously make sure to turn off vdd there while + * we still have control of it. + */ + vlv_detach_power_sequencer(intel_dp); + } + + /* + * We may be stealing the power + * sequencer from another port. + */ + vlv_steal_power_sequencer(dev_priv, crtc->pipe); + + intel_dp->active_pipe = crtc->pipe; + + if (!intel_dp_is_edp(intel_dp)) + return; + + /* now it's all ours */ + intel_dp->pps_pipe = crtc->pipe; + + drm_dbg_kms(&dev_priv->drm, + "initializing pipe %c power sequencer for [ENCODER:%d:%s]\n", + pipe_name(intel_dp->pps_pipe), encoder->base.base.id, + encoder->base.name); + + /* init power sequencer on this pipe and port */ + intel_dp_init_panel_power_sequencer(intel_dp); + intel_dp_init_panel_power_sequencer_registers(intel_dp, true); +} + +static void vlv_pre_enable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + vlv_phy_pre_encoder_enable(encoder, pipe_config); + + intel_enable_dp(state, encoder, pipe_config, conn_state); +} + +static void vlv_dp_pre_pll_enable(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + intel_dp_prepare(encoder, pipe_config); + + vlv_phy_pre_pll_enable(encoder, pipe_config); +} + +static void chv_pre_enable_dp(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + chv_phy_pre_encoder_enable(encoder, pipe_config); + + intel_enable_dp(state, encoder, pipe_config, conn_state); + + /* Second common lane will stay alive on its own now */ + chv_phy_release_cl2_override(encoder); +} + +static void chv_dp_pre_pll_enable(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *pipe_config, + const struct drm_connector_state *conn_state) +{ + intel_dp_prepare(encoder, pipe_config); + + chv_phy_pre_pll_enable(encoder, pipe_config); +} + +static void chv_dp_post_pll_disable(struct intel_atomic_state *state, + struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state, + const struct drm_connector_state *old_conn_state) +{ + chv_phy_post_pll_disable(encoder, old_crtc_state); +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +bool +intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status) +{ + return drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS, link_status, + DP_LINK_STATUS_SIZE) == DP_LINK_STATUS_SIZE; +} + +static u8 intel_dp_voltage_max_2(struct intel_dp *intel_dp) +{ + return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; +} + +static u8 intel_dp_voltage_max_3(struct intel_dp *intel_dp) +{ + return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; +} + +static u8 intel_dp_pre_empemph_max_2(struct intel_dp *intel_dp) +{ + return DP_TRAIN_PRE_EMPH_LEVEL_2; +} + +static u8 intel_dp_pre_empemph_max_3(struct intel_dp *intel_dp) +{ + return DP_TRAIN_PRE_EMPH_LEVEL_3; +} + +static void vlv_set_signal_levels(struct intel_dp *intel_dp) +{ + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; + unsigned long demph_reg_value, preemph_reg_value, + uniqtranscale_reg_value; + u8 train_set = intel_dp->train_set[0]; + + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPH_LEVEL_0: + preemph_reg_value = 0x0004000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + demph_reg_value = 0x2B405555; + uniqtranscale_reg_value = 0x552AB83A; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x5548B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: + demph_reg_value = 0x2B245555; + uniqtranscale_reg_value = 0x5560B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: + demph_reg_value = 0x2B405555; + uniqtranscale_reg_value = 0x5598DA3A; + break; + default: + return; + } + break; + case DP_TRAIN_PRE_EMPH_LEVEL_1: + preemph_reg_value = 0x0002000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x5552B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + demph_reg_value = 0x2B404848; + uniqtranscale_reg_value = 0x5580B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: + demph_reg_value = 0x2B404040; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return; + } + break; + case DP_TRAIN_PRE_EMPH_LEVEL_2: + preemph_reg_value = 0x0000000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + demph_reg_value = 0x2B305555; + uniqtranscale_reg_value = 0x5570B83A; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + demph_reg_value = 0x2B2B4040; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return; + } + break; + case DP_TRAIN_PRE_EMPH_LEVEL_3: + preemph_reg_value = 0x0006000; + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + demph_reg_value = 0x1B405555; + uniqtranscale_reg_value = 0x55ADDA3A; + break; + default: + return; + } + break; + default: + return; + } + + vlv_set_phy_signal_level(encoder, demph_reg_value, preemph_reg_value, + uniqtranscale_reg_value, 0); +} + +static void chv_set_signal_levels(struct intel_dp *intel_dp) +{ + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; + u32 deemph_reg_value, margin_reg_value; + bool uniq_trans_scale = false; + u8 train_set = intel_dp->train_set[0]; + + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPH_LEVEL_0: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + deemph_reg_value = 128; + margin_reg_value = 52; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + deemph_reg_value = 128; + margin_reg_value = 77; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: + deemph_reg_value = 128; + margin_reg_value = 102; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: + deemph_reg_value = 128; + margin_reg_value = 154; + uniq_trans_scale = true; + break; + default: + return; + } + break; + case DP_TRAIN_PRE_EMPH_LEVEL_1: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + deemph_reg_value = 85; + margin_reg_value = 78; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + deemph_reg_value = 85; + margin_reg_value = 116; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: + deemph_reg_value = 85; + margin_reg_value = 154; + break; + default: + return; + } + break; + case DP_TRAIN_PRE_EMPH_LEVEL_2: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + deemph_reg_value = 64; + margin_reg_value = 104; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + deemph_reg_value = 64; + margin_reg_value = 154; + break; + default: + return; + } + break; + case DP_TRAIN_PRE_EMPH_LEVEL_3: + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + deemph_reg_value = 43; + margin_reg_value = 154; + break; + default: + return; + } + break; + default: + return; + } + + chv_set_phy_signal_level(encoder, deemph_reg_value, + margin_reg_value, uniq_trans_scale); +} + +static u32 g4x_signal_levels(u8 train_set) +{ + u32 signal_levels = 0; + + switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0: + default: + signal_levels |= DP_VOLTAGE_0_4; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1: + signal_levels |= DP_VOLTAGE_0_6; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2: + signal_levels |= DP_VOLTAGE_0_8; + break; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_3: + signal_levels |= DP_VOLTAGE_1_2; + break; + } + switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) { + case DP_TRAIN_PRE_EMPH_LEVEL_0: + default: + signal_levels |= DP_PRE_EMPHASIS_0; + break; + case DP_TRAIN_PRE_EMPH_LEVEL_1: + signal_levels |= DP_PRE_EMPHASIS_3_5; + break; + case DP_TRAIN_PRE_EMPH_LEVEL_2: + signal_levels |= DP_PRE_EMPHASIS_6; + break; + case DP_TRAIN_PRE_EMPH_LEVEL_3: + signal_levels |= DP_PRE_EMPHASIS_9_5; + break; + } + return signal_levels; +} + +static void +g4x_set_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u8 train_set = intel_dp->train_set[0]; + u32 signal_levels; + + signal_levels = g4x_signal_levels(train_set); + + drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n", + signal_levels); + + intel_dp->DP &= ~(DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK); + intel_dp->DP |= signal_levels; + + intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); +} + +/* SNB CPU eDP voltage swing and pre-emphasis control */ +static u32 snb_cpu_edp_signal_levels(u8 train_set) +{ + u8 signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0: + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0: + return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1: + return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2: + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2: + return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1: + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1: + return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0: + case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0: + return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B; + default: + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B; + } +} + +static void +snb_cpu_edp_set_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u8 train_set = intel_dp->train_set[0]; + u32 signal_levels; + + signal_levels = snb_cpu_edp_signal_levels(train_set); + + drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n", + signal_levels); + + intel_dp->DP &= ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB; + intel_dp->DP |= signal_levels; + + intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); +} + +/* IVB CPU eDP voltage swing and pre-emphasis control */ +static u32 ivb_cpu_edp_signal_levels(u8 train_set) +{ + u8 signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0: + return EDP_LINK_TRAIN_400MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1: + return EDP_LINK_TRAIN_400MV_3_5DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2: + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2: + return EDP_LINK_TRAIN_400MV_6DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0: + return EDP_LINK_TRAIN_600MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1: + return EDP_LINK_TRAIN_600MV_3_5DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0: + return EDP_LINK_TRAIN_800MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1: + return EDP_LINK_TRAIN_800MV_3_5DB_IVB; + + default: + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_500MV_0DB_IVB; + } +} + +static void +ivb_cpu_edp_set_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u8 train_set = intel_dp->train_set[0]; + u32 signal_levels; + + signal_levels = ivb_cpu_edp_signal_levels(train_set); + + drm_dbg_kms(&dev_priv->drm, "Using signal levels %08x\n", + signal_levels); + + intel_dp->DP &= ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB; + intel_dp->DP |= signal_levels; + + intel_de_write(dev_priv, intel_dp->output_reg, intel_dp->DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); +} + +void intel_dp_set_signal_levels(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u8 train_set = intel_dp->train_set[0]; + + drm_dbg_kms(&dev_priv->drm, "Using vswing level %d%s\n", + train_set & DP_TRAIN_VOLTAGE_SWING_MASK, + train_set & DP_TRAIN_MAX_SWING_REACHED ? " (max)" : ""); + drm_dbg_kms(&dev_priv->drm, "Using pre-emphasis level %d%s\n", + (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) >> + DP_TRAIN_PRE_EMPHASIS_SHIFT, + train_set & DP_TRAIN_MAX_PRE_EMPHASIS_REACHED ? + " (max)" : ""); + + intel_dp->set_signal_levels(intel_dp); +} + +void +intel_dp_program_link_training_pattern(struct intel_dp *intel_dp, + u8 dp_train_pat) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u8 train_pat_mask = drm_dp_training_pattern_mask(intel_dp->dpcd); + + if (dp_train_pat & train_pat_mask) + drm_dbg_kms(&dev_priv->drm, + "Using DP training pattern TPS%d\n", + dp_train_pat & train_pat_mask); + + intel_dp->set_link_train(intel_dp, dp_train_pat); +} + +void intel_dp_set_idle_link_train(struct intel_dp *intel_dp) +{ + if (intel_dp->set_idle_link_train) + intel_dp->set_idle_link_train(intel_dp); +} + +static void +intel_dp_link_down(struct intel_encoder *encoder, + const struct intel_crtc_state *old_crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); + enum port port = encoder->port; + u32 DP = intel_dp->DP; + + if (drm_WARN_ON(&dev_priv->drm, + (intel_de_read(dev_priv, intel_dp->output_reg) & + DP_PORT_EN) == 0)) + return; + + drm_dbg_kms(&dev_priv->drm, "\n"); + + if ((IS_IVYBRIDGE(dev_priv) && port == PORT_A) || + (HAS_PCH_CPT(dev_priv) && port != PORT_A)) { + DP &= ~DP_LINK_TRAIN_MASK_CPT; + DP |= DP_LINK_TRAIN_PAT_IDLE_CPT; + } else { + DP &= ~DP_LINK_TRAIN_MASK; + DP |= DP_LINK_TRAIN_PAT_IDLE; + } + intel_de_write(dev_priv, intel_dp->output_reg, DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); + + DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE); + intel_de_write(dev_priv, intel_dp->output_reg, DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); + + /* + * HW workaround for IBX, we need to move the port + * to transcoder A after disabling it to allow the + * matching HDMI port to be enabled on transcoder A. + */ + if (HAS_PCH_IBX(dev_priv) && crtc->pipe == PIPE_B && port != PORT_A) { + /* + * We get CPU/PCH FIFO underruns on the other pipe when + * doing the workaround. Sweep them under the rug. + */ + intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false); + intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); + + /* always enable with pattern 1 (as per spec) */ + DP &= ~(DP_PIPE_SEL_MASK | DP_LINK_TRAIN_MASK); + DP |= DP_PORT_EN | DP_PIPE_SEL(PIPE_A) | + DP_LINK_TRAIN_PAT_1; + intel_de_write(dev_priv, intel_dp->output_reg, DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); + + DP &= ~DP_PORT_EN; + intel_de_write(dev_priv, intel_dp->output_reg, DP); + intel_de_posting_read(dev_priv, intel_dp->output_reg); + + intel_wait_for_vblank_if_active(dev_priv, PIPE_A); + intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true); + intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); + } + + msleep(intel_dp->panel_power_down_delay); + + intel_dp->DP = DP; + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + intel_wakeref_t wakeref; + + with_pps_lock(intel_dp, wakeref) + intel_dp->active_pipe = INVALID_PIPE; + } +} + +bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp) +{ + u8 dprx = 0; + + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_DPRX_FEATURE_ENUMERATION_LIST, + &dprx) != 1) + return false; + return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED; +} + +static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + /* + * Clear the cached register set to avoid using stale values + * for the sinks that do not support DSC. + */ + memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd)); + + /* Clear fec_capable to avoid using stale values */ + intel_dp->fec_capable = 0; + + /* Cache the DSC DPCD if eDP or DP rev >= 1.4 */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x14 || + intel_dp->edp_dpcd[0] >= DP_EDP_14) { + if (drm_dp_dpcd_read(&intel_dp->aux, DP_DSC_SUPPORT, + intel_dp->dsc_dpcd, + sizeof(intel_dp->dsc_dpcd)) < 0) + drm_err(&i915->drm, + "Failed to read DPCD register 0x%x\n", + DP_DSC_SUPPORT); + + drm_dbg_kms(&i915->drm, "DSC DPCD: %*ph\n", + (int)sizeof(intel_dp->dsc_dpcd), + intel_dp->dsc_dpcd); + + /* FEC is supported only on DP 1.4 */ + if (!intel_dp_is_edp(intel_dp) && + drm_dp_dpcd_readb(&intel_dp->aux, DP_FEC_CAPABILITY, + &intel_dp->fec_capable) < 0) + drm_err(&i915->drm, + "Failed to read FEC DPCD register\n"); + + drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n", + intel_dp->fec_capable); + } +} + +static bool +intel_edp_init_dpcd(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = + to_i915(dp_to_dig_port(intel_dp)->base.base.dev); + + /* this function is meant to be called only once */ + drm_WARN_ON(&dev_priv->drm, intel_dp->dpcd[DP_DPCD_REV] != 0); + + if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd) != 0) + return false; + + drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, + drm_dp_is_branch(intel_dp->dpcd)); + + /* + * Read the eDP display control registers. + * + * Do this independent of DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in + * DP_EDP_CONFIGURATION_CAP, because some buggy displays do not have it + * set, but require eDP 1.4+ detection (e.g. for supported link rates + * method). The display control registers should read zero if they're + * not supported anyway. + */ + if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, + intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == + sizeof(intel_dp->edp_dpcd)) + drm_dbg_kms(&dev_priv->drm, "eDP DPCD: %*ph\n", + (int)sizeof(intel_dp->edp_dpcd), + intel_dp->edp_dpcd); + + /* + * This has to be called after intel_dp->edp_dpcd is filled, PSR checks + * for SET_POWER_CAPABLE bit in intel_dp->edp_dpcd[1] + */ + intel_psr_init_dpcd(intel_dp); + + /* Clear the default sink rates */ + intel_dp->num_sink_rates = 0; + + /* Read the eDP 1.4+ supported link rates. */ + if (intel_dp->edp_dpcd[0] >= DP_EDP_14) { + __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; + int i; + + drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES, + sink_rates, sizeof(sink_rates)); + + for (i = 0; i < ARRAY_SIZE(sink_rates); i++) { + int val = le16_to_cpu(sink_rates[i]); + + if (val == 0) + break; + + /* Value read multiplied by 200kHz gives the per-lane + * link rate in kHz. The source rates are, however, + * stored in terms of LS_Clk kHz. The full conversion + * back to symbols is + * (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte) + */ + intel_dp->sink_rates[i] = (val * 200) / 10; + } + intel_dp->num_sink_rates = i; + } + + /* + * Use DP_LINK_RATE_SET if DP_SUPPORTED_LINK_RATES are available, + * default to DP_MAX_LINK_RATE and DP_LINK_BW_SET otherwise. + */ + if (intel_dp->num_sink_rates) + intel_dp->use_rate_select = true; + else + intel_dp_set_sink_rates(intel_dp); + + intel_dp_set_common_rates(intel_dp); + + /* Read the eDP DSC DPCD registers */ + if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) + intel_dp_get_dsc_sink_cap(intel_dp); + + return true; +} + +static bool +intel_dp_has_sink_count(struct intel_dp *intel_dp) +{ + if (!intel_dp->attached_connector) + return false; + + return drm_dp_read_sink_count_cap(&intel_dp->attached_connector->base, + intel_dp->dpcd, + &intel_dp->desc); +} + +static bool +intel_dp_get_dpcd(struct intel_dp *intel_dp) +{ + int ret; + + if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd)) + return false; + + /* + * Don't clobber cached eDP rates. Also skip re-reading + * the OUI/ID since we know it won't change. + */ + if (!intel_dp_is_edp(intel_dp)) { + drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, + drm_dp_is_branch(intel_dp->dpcd)); + + intel_dp_set_sink_rates(intel_dp); + intel_dp_set_common_rates(intel_dp); + } + + if (intel_dp_has_sink_count(intel_dp)) { + ret = drm_dp_read_sink_count(&intel_dp->aux); + if (ret < 0) + return false; + + /* + * Sink count can change between short pulse hpd hence + * a member variable in intel_dp will track any changes + * between short pulse interrupts. + */ + intel_dp->sink_count = ret; + + /* + * SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that + * a dongle is present but no display. Unless we require to know + * if a dongle is present or not, we don't need to update + * downstream port information. So, an early return here saves + * time from performing other operations which are not required. + */ + if (!intel_dp->sink_count) + return false; + } + + return drm_dp_read_downstream_info(&intel_dp->aux, intel_dp->dpcd, + intel_dp->downstream_ports) == 0; +} + +static bool +intel_dp_can_mst(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + return i915->params.enable_dp_mst && + intel_dp->can_mst && + drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd); +} + +static void +intel_dp_configure_mst(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct intel_encoder *encoder = + &dp_to_dig_port(intel_dp)->base; + bool sink_can_mst = drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd); + + drm_dbg_kms(&i915->drm, + "[ENCODER:%d:%s] MST support: port: %s, sink: %s, modparam: %s\n", + encoder->base.base.id, encoder->base.name, + yesno(intel_dp->can_mst), yesno(sink_can_mst), + yesno(i915->params.enable_dp_mst)); + + if (!intel_dp->can_mst) + return; + + intel_dp->is_mst = sink_can_mst && + i915->params.enable_dp_mst; + + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, + intel_dp->is_mst); +} + +static bool +intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *sink_irq_vector) +{ + return drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT_ESI, + sink_irq_vector, DP_DPRX_ESI_LEN) == + DP_DPRX_ESI_LEN; +} + +bool +intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + /* + * As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication + * of Color Encoding Format and Content Color Gamut], in order to + * sending YCBCR 420 or HDR BT.2020 signals we should use DP VSC SDP. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) + return true; + + switch (conn_state->colorspace) { + case DRM_MODE_COLORIMETRY_SYCC_601: + case DRM_MODE_COLORIMETRY_OPYCC_601: + case DRM_MODE_COLORIMETRY_BT2020_YCC: + case DRM_MODE_COLORIMETRY_BT2020_RGB: + case DRM_MODE_COLORIMETRY_BT2020_CYCC: + return true; + default: + break; + } + + return false; +} + +static ssize_t intel_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc, + struct dp_sdp *sdp, size_t size) +{ + size_t length = sizeof(struct dp_sdp); + + if (size < length) + return -ENOSPC; + + memset(sdp, 0, size); + + /* + * Prepare VSC Header for SU as per DP 1.4a spec, Table 2-119 + * VSC SDP Header Bytes + */ + sdp->sdp_header.HB0 = 0; /* Secondary-Data Packet ID = 0 */ + sdp->sdp_header.HB1 = vsc->sdp_type; /* Secondary-data Packet Type */ + sdp->sdp_header.HB2 = vsc->revision; /* Revision Number */ + sdp->sdp_header.HB3 = vsc->length; /* Number of Valid Data Bytes */ + + /* + * Only revision 0x5 supports Pixel Encoding/Colorimetry Format as + * per DP 1.4a spec. + */ + if (vsc->revision != 0x5) + goto out; + + /* VSC SDP Payload for DB16 through DB18 */ + /* Pixel Encoding and Colorimetry Formats */ + sdp->db[16] = (vsc->pixelformat & 0xf) << 4; /* DB16[7:4] */ + sdp->db[16] |= vsc->colorimetry & 0xf; /* DB16[3:0] */ + + switch (vsc->bpc) { + case 6: + /* 6bpc: 0x0 */ + break; + case 8: + sdp->db[17] = 0x1; /* DB17[3:0] */ + break; + case 10: + sdp->db[17] = 0x2; + break; + case 12: + sdp->db[17] = 0x3; + break; + case 16: + sdp->db[17] = 0x4; + break; + default: + MISSING_CASE(vsc->bpc); + break; + } + /* Dynamic Range and Component Bit Depth */ + if (vsc->dynamic_range == DP_DYNAMIC_RANGE_CTA) + sdp->db[17] |= 0x80; /* DB17[7] */ + + /* Content Type */ + sdp->db[18] = vsc->content_type & 0x7; + +out: + return length; +} + +static ssize_t +intel_dp_hdr_metadata_infoframe_sdp_pack(const struct hdmi_drm_infoframe *drm_infoframe, + struct dp_sdp *sdp, + size_t size) +{ + size_t length = sizeof(struct dp_sdp); + const int infoframe_size = HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE; + unsigned char buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE]; + ssize_t len; + + if (size < length) + return -ENOSPC; + + memset(sdp, 0, size); + + len = hdmi_drm_infoframe_pack_only(drm_infoframe, buf, sizeof(buf)); + if (len < 0) { + DRM_DEBUG_KMS("buffer size is smaller than hdr metadata infoframe\n"); + return -ENOSPC; + } + + if (len != infoframe_size) { + DRM_DEBUG_KMS("wrong static hdr metadata size\n"); + return -ENOSPC; + } + + /* + * Set up the infoframe sdp packet for HDR static metadata. + * Prepare VSC Header for SU as per DP 1.4a spec, + * Table 2-100 and Table 2-101 + */ + + /* Secondary-Data Packet ID, 00h for non-Audio INFOFRAME */ + sdp->sdp_header.HB0 = 0; + /* + * Packet Type 80h + Non-audio INFOFRAME Type value + * HDMI_INFOFRAME_TYPE_DRM: 0x87 + * - 80h + Non-audio INFOFRAME Type value + * - InfoFrame Type: 0x07 + * [CTA-861-G Table-42 Dynamic Range and Mastering InfoFrame] + */ + sdp->sdp_header.HB1 = drm_infoframe->type; + /* + * Least Significant Eight Bits of (Data Byte Count – 1) + * infoframe_size - 1 + */ + sdp->sdp_header.HB2 = 0x1D; + /* INFOFRAME SDP Version Number */ + sdp->sdp_header.HB3 = (0x13 << 2); + /* CTA Header Byte 2 (INFOFRAME Version Number) */ + sdp->db[0] = drm_infoframe->version; + /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ + sdp->db[1] = drm_infoframe->length; + /* + * Copy HDMI_DRM_INFOFRAME_SIZE size from a buffer after + * HDMI_INFOFRAME_HEADER_SIZE + */ + BUILD_BUG_ON(sizeof(sdp->db) < HDMI_DRM_INFOFRAME_SIZE + 2); + memcpy(&sdp->db[2], &buf[HDMI_INFOFRAME_HEADER_SIZE], + HDMI_DRM_INFOFRAME_SIZE); + + /* + * Size of DP infoframe sdp packet for HDR static metadata consists of + * - DP SDP Header(struct dp_sdp_header): 4 bytes + * - Two Data Blocks: 2 bytes + * CTA Header Byte2 (INFOFRAME Version Number) + * CTA Header Byte3 (Length of INFOFRAME) + * - HDMI_DRM_INFOFRAME_SIZE: 26 bytes + * + * Prior to GEN11's GMP register size is identical to DP HDR static metadata + * infoframe size. But GEN11+ has larger than that size, write_infoframe + * will pad rest of the size. + */ + return sizeof(struct dp_sdp_header) + 2 + HDMI_DRM_INFOFRAME_SIZE; +} + +static void intel_write_dp_sdp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + unsigned int type) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct dp_sdp sdp = {}; + ssize_t len; + + if ((crtc_state->infoframes.enable & + intel_hdmi_infoframe_enable(type)) == 0) + return; + + switch (type) { + case DP_SDP_VSC: + len = intel_dp_vsc_sdp_pack(&crtc_state->infoframes.vsc, &sdp, + sizeof(sdp)); + break; + case HDMI_PACKET_TYPE_GAMUT_METADATA: + len = intel_dp_hdr_metadata_infoframe_sdp_pack(&crtc_state->infoframes.drm.drm, + &sdp, sizeof(sdp)); + break; + default: + MISSING_CASE(type); + return; + } + + if (drm_WARN_ON(&dev_priv->drm, len < 0)) + return; + + dig_port->write_infoframe(encoder, crtc_state, type, &sdp, len); +} + +void intel_write_dp_vsc_sdp(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state, + struct drm_dp_vsc_sdp *vsc) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct dp_sdp sdp = {}; + ssize_t len; + + len = intel_dp_vsc_sdp_pack(vsc, &sdp, sizeof(sdp)); + + if (drm_WARN_ON(&dev_priv->drm, len < 0)) + return; + + dig_port->write_infoframe(encoder, crtc_state, DP_SDP_VSC, + &sdp, len); +} + +void intel_dp_set_infoframes(struct intel_encoder *encoder, + bool enable, + const struct intel_crtc_state *crtc_state, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder); + u32 dip_enable = VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_GCP_HSW | + VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW | + VIDEO_DIP_ENABLE_SPD_HSW | VIDEO_DIP_ENABLE_DRM_GLK; + u32 val = intel_de_read(dev_priv, reg); + + /* TODO: Add DSC case (DIP_ENABLE_PPS) */ + /* When PSR is enabled, this routine doesn't disable VSC DIP */ + if (intel_psr_enabled(intel_dp)) + val &= ~dip_enable; + else + val &= ~(dip_enable | VIDEO_DIP_ENABLE_VSC_HSW); + + if (!enable) { + intel_de_write(dev_priv, reg, val); + intel_de_posting_read(dev_priv, reg); + return; + } + + intel_de_write(dev_priv, reg, val); + intel_de_posting_read(dev_priv, reg); + + /* When PSR is enabled, VSC SDP is handled by PSR routine */ + if (!intel_psr_enabled(intel_dp)) + intel_write_dp_sdp(encoder, crtc_state, DP_SDP_VSC); + + intel_write_dp_sdp(encoder, crtc_state, HDMI_PACKET_TYPE_GAMUT_METADATA); +} + +static int intel_dp_vsc_sdp_unpack(struct drm_dp_vsc_sdp *vsc, + const void *buffer, size_t size) +{ + const struct dp_sdp *sdp = buffer; + + if (size < sizeof(struct dp_sdp)) + return -EINVAL; + + memset(vsc, 0, sizeof(*vsc)); + + if (sdp->sdp_header.HB0 != 0) + return -EINVAL; + + if (sdp->sdp_header.HB1 != DP_SDP_VSC) + return -EINVAL; + + vsc->sdp_type = sdp->sdp_header.HB1; + vsc->revision = sdp->sdp_header.HB2; + vsc->length = sdp->sdp_header.HB3; + + if ((sdp->sdp_header.HB2 == 0x2 && sdp->sdp_header.HB3 == 0x8) || + (sdp->sdp_header.HB2 == 0x4 && sdp->sdp_header.HB3 == 0xe)) { + /* + * - HB2 = 0x2, HB3 = 0x8 + * VSC SDP supporting 3D stereo + PSR + * - HB2 = 0x4, HB3 = 0xe + * VSC SDP supporting 3D stereo + PSR2 with Y-coordinate of + * first scan line of the SU region (applies to eDP v1.4b + * and higher). + */ + return 0; + } else if (sdp->sdp_header.HB2 == 0x5 && sdp->sdp_header.HB3 == 0x13) { + /* + * - HB2 = 0x5, HB3 = 0x13 + * VSC SDP supporting 3D stereo + PSR2 + Pixel Encoding/Colorimetry + * Format. + */ + vsc->pixelformat = (sdp->db[16] >> 4) & 0xf; + vsc->colorimetry = sdp->db[16] & 0xf; + vsc->dynamic_range = (sdp->db[17] >> 7) & 0x1; + + switch (sdp->db[17] & 0x7) { + case 0x0: + vsc->bpc = 6; + break; + case 0x1: + vsc->bpc = 8; + break; + case 0x2: + vsc->bpc = 10; + break; + case 0x3: + vsc->bpc = 12; + break; + case 0x4: + vsc->bpc = 16; + break; + default: + MISSING_CASE(sdp->db[17] & 0x7); + return -EINVAL; + } + + vsc->content_type = sdp->db[18] & 0x7; + } else { + return -EINVAL; + } + + return 0; +} + +static int +intel_dp_hdr_metadata_infoframe_sdp_unpack(struct hdmi_drm_infoframe *drm_infoframe, + const void *buffer, size_t size) +{ + int ret; + + const struct dp_sdp *sdp = buffer; + + if (size < sizeof(struct dp_sdp)) + return -EINVAL; + + if (sdp->sdp_header.HB0 != 0) + return -EINVAL; + + if (sdp->sdp_header.HB1 != HDMI_INFOFRAME_TYPE_DRM) + return -EINVAL; + + /* + * Least Significant Eight Bits of (Data Byte Count – 1) + * 1Dh (i.e., Data Byte Count = 30 bytes). + */ + if (sdp->sdp_header.HB2 != 0x1D) + return -EINVAL; + + /* Most Significant Two Bits of (Data Byte Count – 1), Clear to 00b. */ + if ((sdp->sdp_header.HB3 & 0x3) != 0) + return -EINVAL; + + /* INFOFRAME SDP Version Number */ + if (((sdp->sdp_header.HB3 >> 2) & 0x3f) != 0x13) + return -EINVAL; + + /* CTA Header Byte 2 (INFOFRAME Version Number) */ + if (sdp->db[0] != 1) + return -EINVAL; + + /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ + if (sdp->db[1] != HDMI_DRM_INFOFRAME_SIZE) + return -EINVAL; + + ret = hdmi_drm_infoframe_unpack_only(drm_infoframe, &sdp->db[2], + HDMI_DRM_INFOFRAME_SIZE); + + return ret; +} + +static void intel_read_dp_vsc_sdp(struct intel_encoder *encoder, + struct intel_crtc_state *crtc_state, + struct drm_dp_vsc_sdp *vsc) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + unsigned int type = DP_SDP_VSC; + struct dp_sdp sdp = {}; + int ret; + + /* When PSR is enabled, VSC SDP is handled by PSR routine */ + if (intel_psr_enabled(intel_dp)) + return; + + if ((crtc_state->infoframes.enable & + intel_hdmi_infoframe_enable(type)) == 0) + return; + + dig_port->read_infoframe(encoder, crtc_state, type, &sdp, sizeof(sdp)); + + ret = intel_dp_vsc_sdp_unpack(vsc, &sdp, sizeof(sdp)); + + if (ret) + drm_dbg_kms(&dev_priv->drm, "Failed to unpack DP VSC SDP\n"); +} + +static void intel_read_dp_hdr_metadata_infoframe_sdp(struct intel_encoder *encoder, + struct intel_crtc_state *crtc_state, + struct hdmi_drm_infoframe *drm_infoframe) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + unsigned int type = HDMI_PACKET_TYPE_GAMUT_METADATA; + struct dp_sdp sdp = {}; + int ret; + + if ((crtc_state->infoframes.enable & + intel_hdmi_infoframe_enable(type)) == 0) + return; + + dig_port->read_infoframe(encoder, crtc_state, type, &sdp, + sizeof(sdp)); + + ret = intel_dp_hdr_metadata_infoframe_sdp_unpack(drm_infoframe, &sdp, + sizeof(sdp)); + + if (ret) + drm_dbg_kms(&dev_priv->drm, + "Failed to unpack DP HDR Metadata Infoframe SDP\n"); +} + +void intel_read_dp_sdp(struct intel_encoder *encoder, + struct intel_crtc_state *crtc_state, + unsigned int type) +{ + if (encoder->type != INTEL_OUTPUT_DDI) + return; + + switch (type) { + case DP_SDP_VSC: + intel_read_dp_vsc_sdp(encoder, crtc_state, + &crtc_state->infoframes.vsc); + break; + case HDMI_PACKET_TYPE_GAMUT_METADATA: + intel_read_dp_hdr_metadata_infoframe_sdp(encoder, crtc_state, + &crtc_state->infoframes.drm.drm); + break; + default: + MISSING_CASE(type); + break; + } +} + +static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int status = 0; + int test_link_rate; + u8 test_lane_count, test_link_bw; + /* (DP CTS 1.2) + * 4.3.1.11 + */ + /* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */ + status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT, + &test_lane_count); + + if (status <= 0) { + drm_dbg_kms(&i915->drm, "Lane count read failed\n"); + return DP_TEST_NAK; + } + test_lane_count &= DP_MAX_LANE_COUNT_MASK; + + status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE, + &test_link_bw); + if (status <= 0) { + drm_dbg_kms(&i915->drm, "Link Rate read failed\n"); + return DP_TEST_NAK; + } + test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw); + + /* Validate the requested link rate and lane count */ + if (!intel_dp_link_params_valid(intel_dp, test_link_rate, + test_lane_count)) + return DP_TEST_NAK; + + intel_dp->compliance.test_lane_count = test_lane_count; + intel_dp->compliance.test_link_rate = test_link_rate; + + return DP_TEST_ACK; +} + +static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 test_pattern; + u8 test_misc; + __be16 h_width, v_height; + int status = 0; + + /* Read the TEST_PATTERN (DP CTS 3.1.5) */ + status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN, + &test_pattern); + if (status <= 0) { + drm_dbg_kms(&i915->drm, "Test pattern read failed\n"); + return DP_TEST_NAK; + } + if (test_pattern != DP_COLOR_RAMP) + return DP_TEST_NAK; + + status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI, + &h_width, 2); + if (status <= 0) { + drm_dbg_kms(&i915->drm, "H Width read failed\n"); + return DP_TEST_NAK; + } + + status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI, + &v_height, 2); + if (status <= 0) { + drm_dbg_kms(&i915->drm, "V Height read failed\n"); + return DP_TEST_NAK; + } + + status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0, + &test_misc); + if (status <= 0) { + drm_dbg_kms(&i915->drm, "TEST MISC read failed\n"); + return DP_TEST_NAK; + } + if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB) + return DP_TEST_NAK; + if (test_misc & DP_TEST_DYNAMIC_RANGE_CEA) + return DP_TEST_NAK; + switch (test_misc & DP_TEST_BIT_DEPTH_MASK) { + case DP_TEST_BIT_DEPTH_6: + intel_dp->compliance.test_data.bpc = 6; + break; + case DP_TEST_BIT_DEPTH_8: + intel_dp->compliance.test_data.bpc = 8; + break; + default: + return DP_TEST_NAK; + } + + intel_dp->compliance.test_data.video_pattern = test_pattern; + intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width); + intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height); + /* Set test active flag here so userspace doesn't interrupt things */ + intel_dp->compliance.test_active = true; + + return DP_TEST_ACK; +} + +static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 test_result = DP_TEST_ACK; + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + + if (intel_connector->detect_edid == NULL || + connector->edid_corrupt || + intel_dp->aux.i2c_defer_count > 6) { + /* Check EDID read for NACKs, DEFERs and corruption + * (DP CTS 1.2 Core r1.1) + * 4.2.2.4 : Failed EDID read, I2C_NAK + * 4.2.2.5 : Failed EDID read, I2C_DEFER + * 4.2.2.6 : EDID corruption detected + * Use failsafe mode for all cases + */ + if (intel_dp->aux.i2c_nack_count > 0 || + intel_dp->aux.i2c_defer_count > 0) + drm_dbg_kms(&i915->drm, + "EDID read had %d NACKs, %d DEFERs\n", + intel_dp->aux.i2c_nack_count, + intel_dp->aux.i2c_defer_count); + intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE; + } else { + struct edid *block = intel_connector->detect_edid; + + /* We have to write the checksum + * of the last block read + */ + block += intel_connector->detect_edid->extensions; + + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM, + block->checksum) <= 0) + drm_dbg_kms(&i915->drm, + "Failed to write EDID checksum\n"); + + test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE; + intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED; + } + + /* Set test active flag here so userspace doesn't interrupt things */ + intel_dp->compliance.test_active = true; + + return test_result; +} + +static u8 intel_dp_prepare_phytest(struct intel_dp *intel_dp) +{ + struct drm_dp_phy_test_params *data = + &intel_dp->compliance.test_data.phytest; + + if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) { + DRM_DEBUG_KMS("DP Phy Test pattern AUX read failure\n"); + return DP_TEST_NAK; + } + + /* + * link_mst is set to false to avoid executing mst related code + * during compliance testing. + */ + intel_dp->link_mst = false; + + return DP_TEST_ACK; +} + +static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = + to_i915(dp_to_dig_port(intel_dp)->base.base.dev); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_dp_phy_test_params *data = + &intel_dp->compliance.test_data.phytest; + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); + enum pipe pipe = crtc->pipe; + u32 pattern_val; + + switch (data->phy_pattern) { + case DP_PHY_TEST_PATTERN_NONE: + DRM_DEBUG_KMS("Disable Phy Test Pattern\n"); + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0); + break; + case DP_PHY_TEST_PATTERN_D10_2: + DRM_DEBUG_KMS("Set D10.2 Phy Test Pattern\n"); + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), + DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2); + break; + case DP_PHY_TEST_PATTERN_ERROR_COUNT: + DRM_DEBUG_KMS("Set Error Count Phy Test Pattern\n"); + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), + DDI_DP_COMP_CTL_ENABLE | + DDI_DP_COMP_CTL_SCRAMBLED_0); + break; + case DP_PHY_TEST_PATTERN_PRBS7: + DRM_DEBUG_KMS("Set PRBS7 Phy Test Pattern\n"); + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), + DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7); + break; + case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: + /* + * FIXME: Ideally pattern should come from DPCD 0x250. As + * current firmware of DPR-100 could not set it, so hardcoding + * now for complaince test. + */ + DRM_DEBUG_KMS("Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n"); + pattern_val = 0x3e0f83e0; + intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val); + pattern_val = 0x0f83e0f8; + intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val); + pattern_val = 0x0000f83e; + intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val); + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), + DDI_DP_COMP_CTL_ENABLE | + DDI_DP_COMP_CTL_CUSTOM80); + break; + case DP_PHY_TEST_PATTERN_CP2520: + /* + * FIXME: Ideally pattern should come from DPCD 0x24A. As + * current firmware of DPR-100 could not set it, so hardcoding + * now for complaince test. + */ + DRM_DEBUG_KMS("Set HBR2 compliance Phy Test Pattern\n"); + pattern_val = 0xFB; + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), + DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 | + pattern_val); + break; + default: + WARN(1, "Invalid Phy Test Pattern\n"); + } +} + +static void +intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); + enum pipe pipe = crtc->pipe; + u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value; + + trans_ddi_func_ctl_value = intel_de_read(dev_priv, + TRANS_DDI_FUNC_CTL(pipe)); + trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe)); + dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe)); + + trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE | + TGL_TRANS_DDI_PORT_MASK); + trans_conf_value &= ~PIPECONF_ENABLE; + dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE; + + intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value); + intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe), + trans_ddi_func_ctl_value); + intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value); +} + +static void +intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp, uint8_t lane_cnt) +{ + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct drm_device *dev = dig_port->base.base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + enum port port = dig_port->base.port; + struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc); + enum pipe pipe = crtc->pipe; + u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value; + + trans_ddi_func_ctl_value = intel_de_read(dev_priv, + TRANS_DDI_FUNC_CTL(pipe)); + trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe)); + dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe)); + + trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE | + TGL_TRANS_DDI_SELECT_PORT(port); + trans_conf_value |= PIPECONF_ENABLE; + dp_tp_ctl_value |= DP_TP_CTL_ENABLE; + + intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value); + intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value); + intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe), + trans_ddi_func_ctl_value); +} + +void intel_dp_process_phy_request(struct intel_dp *intel_dp) +{ + struct drm_dp_phy_test_params *data = + &intel_dp->compliance.test_data.phytest; + u8 link_status[DP_LINK_STATUS_SIZE]; + + if (!intel_dp_get_link_status(intel_dp, link_status)) { + DRM_DEBUG_KMS("failed to get link status\n"); + return; + } + + /* retrieve vswing & pre-emphasis setting */ + intel_dp_get_adjust_train(intel_dp, link_status); + + intel_dp_autotest_phy_ddi_disable(intel_dp); + + intel_dp_set_signal_levels(intel_dp); + + intel_dp_phy_pattern_update(intel_dp); + + intel_dp_autotest_phy_ddi_enable(intel_dp, data->num_lanes); + + drm_dp_set_phy_test_pattern(&intel_dp->aux, data, + intel_dp->dpcd[DP_DPCD_REV]); +} + +static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp) +{ + u8 test_result; + + test_result = intel_dp_prepare_phytest(intel_dp); + if (test_result != DP_TEST_ACK) + DRM_ERROR("Phy test preparation failed\n"); + + intel_dp_process_phy_request(intel_dp); + + return test_result; +} + +static void intel_dp_handle_test_request(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 response = DP_TEST_NAK; + u8 request = 0; + int status; + + status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request); + if (status <= 0) { + drm_dbg_kms(&i915->drm, + "Could not read test request from sink\n"); + goto update_status; + } + + switch (request) { + case DP_TEST_LINK_TRAINING: + drm_dbg_kms(&i915->drm, "LINK_TRAINING test requested\n"); + response = intel_dp_autotest_link_training(intel_dp); + break; + case DP_TEST_LINK_VIDEO_PATTERN: + drm_dbg_kms(&i915->drm, "TEST_PATTERN test requested\n"); + response = intel_dp_autotest_video_pattern(intel_dp); + break; + case DP_TEST_LINK_EDID_READ: + drm_dbg_kms(&i915->drm, "EDID test requested\n"); + response = intel_dp_autotest_edid(intel_dp); + break; + case DP_TEST_LINK_PHY_TEST_PATTERN: + drm_dbg_kms(&i915->drm, "PHY_PATTERN test requested\n"); + response = intel_dp_autotest_phy_pattern(intel_dp); + break; + default: + drm_dbg_kms(&i915->drm, "Invalid test request '%02x'\n", + request); + break; + } + + if (response & DP_TEST_ACK) + intel_dp->compliance.test_type = request; + +update_status: + status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response); + if (status <= 0) + drm_dbg_kms(&i915->drm, + "Could not write test response to sink\n"); +} + +/** + * intel_dp_check_mst_status - service any pending MST interrupts, check link status + * @intel_dp: Intel DP struct + * + * Read any pending MST interrupts, call MST core to handle these and ack the + * interrupts. Check if the main and AUX link state is ok. + * + * Returns: + * - %true if pending interrupts were serviced (or no interrupts were + * pending) w/o detecting an error condition. + * - %false if an error condition - like AUX failure or a loss of link - is + * detected, which needs servicing from the hotplug work. + */ +static bool +intel_dp_check_mst_status(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + bool link_ok = true; + + drm_WARN_ON_ONCE(&i915->drm, intel_dp->active_mst_links < 0); + + for (;;) { + /* + * The +2 is because DP_DPRX_ESI_LEN is 14, but we then + * pass in "esi+10" to drm_dp_channel_eq_ok(), which + * takes a 6-byte array. So we actually need 16 bytes + * here. + * + * Somebody who knows what the limits actually are + * should check this, but for now this is at least + * harmless and avoids a valid compiler warning about + * using more of the array than we have allocated. + */ + u8 esi[DP_DPRX_ESI_LEN+2] = {}; + bool handled; + int retry; + + if (!intel_dp_get_sink_irq_esi(intel_dp, esi)) { + drm_dbg_kms(&i915->drm, + "failed to get ESI - device may have failed\n"); + link_ok = false; + + break; + } + + /* check link status - esi[10] = 0x200c */ + if (intel_dp->active_mst_links > 0 && link_ok && + !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { + drm_dbg_kms(&i915->drm, + "channel EQ not ok, retraining\n"); + link_ok = false; + } + + drm_dbg_kms(&i915->drm, "got esi %3ph\n", esi); + + drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled); + if (!handled) + break; + + for (retry = 0; retry < 3; retry++) { + int wret; + + wret = drm_dp_dpcd_write(&intel_dp->aux, + DP_SINK_COUNT_ESI+1, + &esi[1], 3); + if (wret == 3) + break; + } + } + + return link_ok; +} + +static bool +intel_dp_needs_link_retrain(struct intel_dp *intel_dp) +{ + u8 link_status[DP_LINK_STATUS_SIZE]; + + if (!intel_dp->link_trained) + return false; + + /* + * While PSR source HW is enabled, it will control main-link sending + * frames, enabling and disabling it so trying to do a retrain will fail + * as the link would or not be on or it could mix training patterns + * and frame data at the same time causing retrain to fail. + * Also when exiting PSR, HW will retrain the link anyways fixing + * any link status error. + */ + if (intel_psr_enabled(intel_dp)) + return false; + + if (!intel_dp_get_link_status(intel_dp, link_status)) + return false; + + /* + * Validate the cached values of intel_dp->link_rate and + * intel_dp->lane_count before attempting to retrain. + */ + if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate, + intel_dp->lane_count)) + return false; + + /* Retrain if Channel EQ or CR not ok */ + return !drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); +} + +static bool intel_dp_has_connector(struct intel_dp *intel_dp, + const struct drm_connector_state *conn_state) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct intel_encoder *encoder; + enum pipe pipe; + + if (!conn_state->best_encoder) + return false; + + /* SST */ + encoder = &dp_to_dig_port(intel_dp)->base; + if (conn_state->best_encoder == &encoder->base) + return true; + + /* MST */ + for_each_pipe(i915, pipe) { + encoder = &intel_dp->mst_encoders[pipe]->base; + if (conn_state->best_encoder == &encoder->base) + return true; + } + + return false; +} + +static int intel_dp_prep_link_retrain(struct intel_dp *intel_dp, + struct drm_modeset_acquire_ctx *ctx, + u32 *crtc_mask) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct drm_connector_list_iter conn_iter; + struct intel_connector *connector; + int ret = 0; + + *crtc_mask = 0; + + if (!intel_dp_needs_link_retrain(intel_dp)) + return 0; + + drm_connector_list_iter_begin(&i915->drm, &conn_iter); + for_each_intel_connector_iter(connector, &conn_iter) { + struct drm_connector_state *conn_state = + connector->base.state; + struct intel_crtc_state *crtc_state; + struct intel_crtc *crtc; + + if (!intel_dp_has_connector(intel_dp, conn_state)) + continue; + + crtc = to_intel_crtc(conn_state->crtc); + if (!crtc) + continue; + + ret = drm_modeset_lock(&crtc->base.mutex, ctx); + if (ret) + break; + + crtc_state = to_intel_crtc_state(crtc->base.state); + + drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state)); + + if (!crtc_state->hw.active) + continue; + + if (conn_state->commit && + !try_wait_for_completion(&conn_state->commit->hw_done)) + continue; + + *crtc_mask |= drm_crtc_mask(&crtc->base); + } + drm_connector_list_iter_end(&conn_iter); + + if (!intel_dp_needs_link_retrain(intel_dp)) + *crtc_mask = 0; + + return ret; +} + +static bool intel_dp_is_connected(struct intel_dp *intel_dp) +{ + struct intel_connector *connector = intel_dp->attached_connector; + + return connector->base.status == connector_status_connected || + intel_dp->is_mst; +} + +int intel_dp_retrain_link(struct intel_encoder *encoder, + struct drm_modeset_acquire_ctx *ctx) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + struct intel_crtc *crtc; + u32 crtc_mask; + int ret; + + if (!intel_dp_is_connected(intel_dp)) + return 0; + + ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, + ctx); + if (ret) + return ret; + + ret = intel_dp_prep_link_retrain(intel_dp, ctx, &crtc_mask); + if (ret) + return ret; + + if (crtc_mask == 0) + return 0; + + drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] retraining link\n", + encoder->base.base.id, encoder->base.name); + + for_each_intel_crtc_mask(&dev_priv->drm, crtc, crtc_mask) { + const struct intel_crtc_state *crtc_state = + to_intel_crtc_state(crtc->base.state); + + /* Suppress underruns caused by re-training */ + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false); + if (crtc_state->has_pch_encoder) + intel_set_pch_fifo_underrun_reporting(dev_priv, + intel_crtc_pch_transcoder(crtc), false); + } + + intel_dp_start_link_train(intel_dp); + intel_dp_stop_link_train(intel_dp); + + for_each_intel_crtc_mask(&dev_priv->drm, crtc, crtc_mask) { + const struct intel_crtc_state *crtc_state = + to_intel_crtc_state(crtc->base.state); + + /* Keep underrun reporting disabled until things are stable */ + intel_wait_for_vblank(dev_priv, crtc->pipe); + + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true); + if (crtc_state->has_pch_encoder) + intel_set_pch_fifo_underrun_reporting(dev_priv, + intel_crtc_pch_transcoder(crtc), true); + } + + return 0; +} + +/* + * If display is now connected check links status, + * there has been known issues of link loss triggering + * long pulse. + * + * Some sinks (eg. ASUS PB287Q) seem to perform some + * weird HPD ping pong during modesets. So we can apparently + * end up with HPD going low during a modeset, and then + * going back up soon after. And once that happens we must + * retrain the link to get a picture. That's in case no + * userspace component reacted to intermittent HPD dip. + */ +static enum intel_hotplug_state +intel_dp_hotplug(struct intel_encoder *encoder, + struct intel_connector *connector) +{ + struct drm_modeset_acquire_ctx ctx; + enum intel_hotplug_state state; + int ret; + + state = intel_encoder_hotplug(encoder, connector); + + drm_modeset_acquire_init(&ctx, 0); + + for (;;) { + ret = intel_dp_retrain_link(encoder, &ctx); + + if (ret == -EDEADLK) { + drm_modeset_backoff(&ctx); + continue; + } + + break; + } + + drm_modeset_drop_locks(&ctx); + drm_modeset_acquire_fini(&ctx); + drm_WARN(encoder->base.dev, ret, + "Acquiring modeset locks failed with %i\n", ret); + + /* + * Keeping it consistent with intel_ddi_hotplug() and + * intel_hdmi_hotplug(). + */ + if (state == INTEL_HOTPLUG_UNCHANGED && !connector->hotplug_retries) + state = INTEL_HOTPLUG_RETRY; + + return state; +} + +static void intel_dp_check_service_irq(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 val; + + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (drm_dp_dpcd_readb(&intel_dp->aux, + DP_DEVICE_SERVICE_IRQ_VECTOR, &val) != 1 || !val) + return; + + drm_dp_dpcd_writeb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, val); + + if (val & DP_AUTOMATED_TEST_REQUEST) + intel_dp_handle_test_request(intel_dp); + + if (val & DP_CP_IRQ) + intel_hdcp_handle_cp_irq(intel_dp->attached_connector); + + if (val & DP_SINK_SPECIFIC_IRQ) + drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n"); +} + +/* + * According to DP spec + * 5.1.2: + * 1. Read DPCD + * 2. Configure link according to Receiver Capabilities + * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 + * 4. Check link status on receipt of hot-plug interrupt + * + * intel_dp_short_pulse - handles short pulse interrupts + * when full detection is not required. + * Returns %true if short pulse is handled and full detection + * is NOT required and %false otherwise. + */ +static bool +intel_dp_short_pulse(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u8 old_sink_count = intel_dp->sink_count; + bool ret; + + /* + * Clearing compliance test variables to allow capturing + * of values for next automated test request. + */ + memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); + + /* + * Now read the DPCD to see if it's actually running + * If the current value of sink count doesn't match with + * the value that was stored earlier or dpcd read failed + * we need to do full detection + */ + ret = intel_dp_get_dpcd(intel_dp); + + if ((old_sink_count != intel_dp->sink_count) || !ret) { + /* No need to proceed if we are going to do full detect */ + return false; + } + + intel_dp_check_service_irq(intel_dp); + + /* Handle CEC interrupts, if any */ + drm_dp_cec_irq(&intel_dp->aux); + + /* defer to the hotplug work for link retraining if needed */ + if (intel_dp_needs_link_retrain(intel_dp)) + return false; + + intel_psr_short_pulse(intel_dp); + + if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) { + drm_dbg_kms(&dev_priv->drm, + "Link Training Compliance Test requested\n"); + /* Send a Hotplug Uevent to userspace to start modeset */ + drm_kms_helper_hotplug_event(&dev_priv->drm); + } + + return true; +} + +/* XXX this is probably wrong for multiple downstream ports */ +static enum drm_connector_status +intel_dp_detect_dpcd(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp); + u8 *dpcd = intel_dp->dpcd; + u8 type; + + if (drm_WARN_ON(&i915->drm, intel_dp_is_edp(intel_dp))) + return connector_status_connected; + + if (lspcon->active) + lspcon_resume(lspcon); + + if (!intel_dp_get_dpcd(intel_dp)) + return connector_status_disconnected; + + /* if there's no downstream port, we're done */ + if (!drm_dp_is_branch(dpcd)) + return connector_status_connected; + + /* If we're HPD-aware, SINK_COUNT changes dynamically */ + if (intel_dp_has_sink_count(intel_dp) && + intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { + return intel_dp->sink_count ? + connector_status_connected : connector_status_disconnected; + } + + if (intel_dp_can_mst(intel_dp)) + return connector_status_connected; + + /* If no HPD, poke DDC gently */ + if (drm_probe_ddc(&intel_dp->aux.ddc)) + return connector_status_connected; + + /* Well we tried, say unknown for unreliable port types */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { + type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK; + if (type == DP_DS_PORT_TYPE_VGA || + type == DP_DS_PORT_TYPE_NON_EDID) + return connector_status_unknown; + } else { + type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & + DP_DWN_STRM_PORT_TYPE_MASK; + if (type == DP_DWN_STRM_PORT_TYPE_ANALOG || + type == DP_DWN_STRM_PORT_TYPE_OTHER) + return connector_status_unknown; + } + + /* Anything else is out of spec, warn and ignore */ + drm_dbg_kms(&i915->drm, "Broken DP branch device, ignoring\n"); + return connector_status_disconnected; +} + +static enum drm_connector_status +edp_detect(struct intel_dp *intel_dp) +{ + return connector_status_connected; +} + +static bool ibx_digital_port_connected(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 bit = dev_priv->hotplug.pch_hpd[encoder->hpd_pin]; + + return intel_de_read(dev_priv, SDEISR) & bit; +} + +static bool g4x_digital_port_connected(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 bit; + + switch (encoder->hpd_pin) { + case HPD_PORT_B: + bit = PORTB_HOTPLUG_LIVE_STATUS_G4X; + break; + case HPD_PORT_C: + bit = PORTC_HOTPLUG_LIVE_STATUS_G4X; + break; + case HPD_PORT_D: + bit = PORTD_HOTPLUG_LIVE_STATUS_G4X; + break; + default: + MISSING_CASE(encoder->hpd_pin); + return false; + } + + return intel_de_read(dev_priv, PORT_HOTPLUG_STAT) & bit; +} + +static bool gm45_digital_port_connected(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 bit; + + switch (encoder->hpd_pin) { + case HPD_PORT_B: + bit = PORTB_HOTPLUG_LIVE_STATUS_GM45; + break; + case HPD_PORT_C: + bit = PORTC_HOTPLUG_LIVE_STATUS_GM45; + break; + case HPD_PORT_D: + bit = PORTD_HOTPLUG_LIVE_STATUS_GM45; + break; + default: + MISSING_CASE(encoder->hpd_pin); + return false; + } + + return intel_de_read(dev_priv, PORT_HOTPLUG_STAT) & bit; +} + +static bool ilk_digital_port_connected(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + u32 bit = dev_priv->hotplug.hpd[encoder->hpd_pin]; + + return intel_de_read(dev_priv, DEISR) & bit; +} + +/* + * intel_digital_port_connected - is the specified port connected? + * @encoder: intel_encoder + * + * In cases where there's a connector physically connected but it can't be used + * by our hardware we also return false, since the rest of the driver should + * pretty much treat the port as disconnected. This is relevant for type-C + * (starting on ICL) where there's ownership involved. + * + * Return %true if port is connected, %false otherwise. + */ +bool intel_digital_port_connected(struct intel_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + bool is_connected = false; + intel_wakeref_t wakeref; + + with_intel_display_power(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref) + is_connected = dig_port->connected(encoder); + + return is_connected; +} + +static struct edid * +intel_dp_get_edid(struct intel_dp *intel_dp) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + + /* use cached edid if we have one */ + if (intel_connector->edid) { + /* invalid edid */ + if (IS_ERR(intel_connector->edid)) + return NULL; + + return drm_edid_duplicate(intel_connector->edid); + } else + return drm_get_edid(&intel_connector->base, + &intel_dp->aux.ddc); +} + +static void +intel_dp_update_dfp(struct intel_dp *intel_dp, + const struct edid *edid) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct intel_connector *connector = intel_dp->attached_connector; + + intel_dp->dfp.max_bpc = + drm_dp_downstream_max_bpc(intel_dp->dpcd, + intel_dp->downstream_ports, edid); + + intel_dp->dfp.max_dotclock = + drm_dp_downstream_max_dotclock(intel_dp->dpcd, + intel_dp->downstream_ports); + + intel_dp->dfp.min_tmds_clock = + drm_dp_downstream_min_tmds_clock(intel_dp->dpcd, + intel_dp->downstream_ports, + edid); + intel_dp->dfp.max_tmds_clock = + drm_dp_downstream_max_tmds_clock(intel_dp->dpcd, + intel_dp->downstream_ports, + edid); + + drm_dbg_kms(&i915->drm, + "[CONNECTOR:%d:%s] DFP max bpc %d, max dotclock %d, TMDS clock %d-%d\n", + connector->base.base.id, connector->base.name, + intel_dp->dfp.max_bpc, + intel_dp->dfp.max_dotclock, + intel_dp->dfp.min_tmds_clock, + intel_dp->dfp.max_tmds_clock); +} + +static void +intel_dp_update_420(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct intel_connector *connector = intel_dp->attached_connector; + bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420; + + /* No YCbCr output support on gmch platforms */ + if (HAS_GMCH(i915)) + return; + + /* + * ILK doesn't seem capable of DP YCbCr output. The + * displayed image is severly corrupted. SNB+ is fine. + */ + if (IS_GEN(i915, 5)) + return; + + is_branch = drm_dp_is_branch(intel_dp->dpcd); + ycbcr_420_passthrough = + drm_dp_downstream_420_passthrough(intel_dp->dpcd, + intel_dp->downstream_ports); + ycbcr_444_to_420 = + drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd, + intel_dp->downstream_ports); + + if (INTEL_GEN(i915) >= 11) { + /* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */ + intel_dp->dfp.ycbcr_444_to_420 = + ycbcr_444_to_420 && !ycbcr_420_passthrough; + + connector->base.ycbcr_420_allowed = + !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; + } else { + /* 4:4:4->4:2:0 conversion is the only way */ + intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420; + + connector->base.ycbcr_420_allowed = ycbcr_444_to_420; + } + + drm_dbg_kms(&i915->drm, + "[CONNECTOR:%d:%s] YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", + connector->base.base.id, connector->base.name, + yesno(connector->base.ycbcr_420_allowed), + yesno(intel_dp->dfp.ycbcr_444_to_420)); +} + +static void +intel_dp_set_edid(struct intel_dp *intel_dp) +{ + struct intel_connector *connector = intel_dp->attached_connector; + struct edid *edid; + + intel_dp_unset_edid(intel_dp); + edid = intel_dp_get_edid(intel_dp); + connector->detect_edid = edid; + + intel_dp_update_dfp(intel_dp, edid); + intel_dp_update_420(intel_dp); + + if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) { + intel_dp->has_hdmi_sink = drm_detect_hdmi_monitor(edid); + intel_dp->has_audio = drm_detect_monitor_audio(edid); + } + + drm_dp_cec_set_edid(&intel_dp->aux, edid); + intel_dp->edid_quirks = drm_dp_get_edid_quirks(edid); +} + +static void +intel_dp_unset_edid(struct intel_dp *intel_dp) +{ + struct intel_connector *connector = intel_dp->attached_connector; + + drm_dp_cec_unset_edid(&intel_dp->aux); + kfree(connector->detect_edid); + connector->detect_edid = NULL; + + intel_dp->has_hdmi_sink = false; + intel_dp->has_audio = false; + intel_dp->edid_quirks = 0; + + intel_dp->dfp.max_bpc = 0; + intel_dp->dfp.max_dotclock = 0; + intel_dp->dfp.min_tmds_clock = 0; + intel_dp->dfp.max_tmds_clock = 0; + + intel_dp->dfp.ycbcr_444_to_420 = false; + connector->base.ycbcr_420_allowed = false; +} + +static int +intel_dp_detect(struct drm_connector *connector, + struct drm_modeset_acquire_ctx *ctx, + bool force) +{ + struct drm_i915_private *dev_priv = to_i915(connector->dev); + struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *encoder = &dig_port->base; + enum drm_connector_status status; + + drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", + connector->base.id, connector->name); + drm_WARN_ON(&dev_priv->drm, + !drm_modeset_is_locked(&dev_priv->drm.mode_config.connection_mutex)); + + if (!INTEL_DISPLAY_ENABLED(dev_priv)) + return connector_status_disconnected; + + /* Can't disconnect eDP */ + if (intel_dp_is_edp(intel_dp)) + status = edp_detect(intel_dp); + else if (intel_digital_port_connected(encoder)) + status = intel_dp_detect_dpcd(intel_dp); + else + status = connector_status_disconnected; + + if (status == connector_status_disconnected) { + memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); + memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd)); + + if (intel_dp->is_mst) { + drm_dbg_kms(&dev_priv->drm, + "MST device may have disappeared %d vs %d\n", + intel_dp->is_mst, + intel_dp->mst_mgr.mst_state); + intel_dp->is_mst = false; + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, + intel_dp->is_mst); + } + + goto out; + } + + /* Read DP Sink DSC Cap DPCD regs for DP v1.4 */ + if (INTEL_GEN(dev_priv) >= 11) + intel_dp_get_dsc_sink_cap(intel_dp); + + intel_dp_configure_mst(intel_dp); + + /* + * TODO: Reset link params when switching to MST mode, until MST + * supports link training fallback params. + */ + if (intel_dp->reset_link_params || intel_dp->is_mst) { + /* Initial max link lane count */ + intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp); + + /* Initial max link rate */ + intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp); + + intel_dp->reset_link_params = false; + } + + intel_dp_print_rates(intel_dp); + + if (intel_dp->is_mst) { + /* + * If we are in MST mode then this connector + * won't appear connected or have anything + * with EDID on it + */ + status = connector_status_disconnected; + goto out; + } + + /* + * Some external monitors do not signal loss of link synchronization + * with an IRQ_HPD, so force a link status check. + */ + if (!intel_dp_is_edp(intel_dp)) { + int ret; + + ret = intel_dp_retrain_link(encoder, ctx); + if (ret) + return ret; + } + + /* + * Clearing NACK and defer counts to get their exact values + * while reading EDID which are required by Compliance tests + * 4.2.2.4 and 4.2.2.5 + */ + intel_dp->aux.i2c_nack_count = 0; + intel_dp->aux.i2c_defer_count = 0; + + intel_dp_set_edid(intel_dp); + if (intel_dp_is_edp(intel_dp) || + to_intel_connector(connector)->detect_edid) + status = connector_status_connected; + + intel_dp_check_service_irq(intel_dp); + +out: + if (status != connector_status_connected && !intel_dp->is_mst) + intel_dp_unset_edid(intel_dp); + + /* + * Make sure the refs for power wells enabled during detect are + * dropped to avoid a new detect cycle triggered by HPD polling. + */ + intel_display_power_flush_work(dev_priv); + + if (!intel_dp_is_edp(intel_dp)) + drm_dp_set_subconnector_property(connector, + status, + intel_dp->dpcd, + intel_dp->downstream_ports); + return status; +} + +static void +intel_dp_force(struct drm_connector *connector) +{ + struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + struct intel_encoder *intel_encoder = &dig_port->base; + struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); + enum intel_display_power_domain aux_domain = + intel_aux_power_domain(dig_port); + intel_wakeref_t wakeref; + + drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", + connector->base.id, connector->name); + intel_dp_unset_edid(intel_dp); + + if (connector->status != connector_status_connected) + return; + + wakeref = intel_display_power_get(dev_priv, aux_domain); + + intel_dp_set_edid(intel_dp); + + intel_display_power_put(dev_priv, aux_domain, wakeref); +} + +static int intel_dp_get_modes(struct drm_connector *connector) +{ + struct intel_connector *intel_connector = to_intel_connector(connector); + struct edid *edid; + + edid = intel_connector->detect_edid; + if (edid) { + int ret = intel_connector_update_modes(connector, edid); + if (ret) + return ret; + } + + /* if eDP has no EDID, fall back to fixed mode */ + if (intel_dp_is_edp(intel_attached_dp(intel_connector)) && + intel_connector->panel.fixed_mode) { + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, + intel_connector->panel.fixed_mode); + if (mode) { + drm_mode_probed_add(connector, mode); + return 1; + } + } + + if (!edid) { + struct intel_dp *intel_dp = intel_attached_dp(intel_connector); + struct drm_display_mode *mode; + + mode = drm_dp_downstream_mode(connector->dev, + intel_dp->dpcd, + intel_dp->downstream_ports); + if (mode) { + drm_mode_probed_add(connector, mode); + return 1; + } + } + + return 0; +} + +static int +intel_dp_connector_register(struct drm_connector *connector) +{ + struct drm_i915_private *i915 = to_i915(connector->dev); + struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); + int ret; + + ret = intel_connector_register(connector); + if (ret) + return ret; + + drm_dbg_kms(&i915->drm, "registering %s bus for %s\n", + intel_dp->aux.name, connector->kdev->kobj.name); + + intel_dp->aux.dev = connector->kdev; + ret = drm_dp_aux_register(&intel_dp->aux); + if (!ret) + drm_dp_cec_register_connector(&intel_dp->aux, connector); + return ret; +} + +static void +intel_dp_connector_unregister(struct drm_connector *connector) +{ + struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); + + drm_dp_cec_unregister_connector(&intel_dp->aux); + drm_dp_aux_unregister(&intel_dp->aux); + intel_connector_unregister(connector); +} + +void intel_dp_encoder_flush_work(struct drm_encoder *encoder) +{ + struct intel_digital_port *dig_port = enc_to_dig_port(to_intel_encoder(encoder)); + struct intel_dp *intel_dp = &dig_port->dp; + + intel_dp_mst_encoder_cleanup(dig_port); + if (intel_dp_is_edp(intel_dp)) { + intel_wakeref_t wakeref; + + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); + /* + * vdd might still be enabled do to the delayed vdd off. + * Make sure vdd is actually turned off here. + */ + with_pps_lock(intel_dp, wakeref) + edp_panel_vdd_off_sync(intel_dp); + + if (intel_dp->edp_notifier.notifier_call) { + unregister_reboot_notifier(&intel_dp->edp_notifier); + intel_dp->edp_notifier.notifier_call = NULL; + } + } + + intel_dp_aux_fini(intel_dp); +} + +static void intel_dp_encoder_destroy(struct drm_encoder *encoder) +{ + intel_dp_encoder_flush_work(encoder); + + drm_encoder_cleanup(encoder); + kfree(enc_to_dig_port(to_intel_encoder(encoder))); +} + +void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) +{ + struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); + intel_wakeref_t wakeref; + + if (!intel_dp_is_edp(intel_dp)) + return; + + /* + * vdd might still be enabled do to the delayed vdd off. + * Make sure vdd is actually turned off here. + */ + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); + with_pps_lock(intel_dp, wakeref) + edp_panel_vdd_off_sync(intel_dp); +} + +static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); + + lockdep_assert_held(&dev_priv->pps_mutex); + + if (!edp_have_panel_vdd(intel_dp)) + return; + + /* + * The VDD bit needs a power domain reference, so if the bit is + * already enabled when we boot or resume, grab this reference and + * schedule a vdd off, so we don't hold on to the reference + * indefinitely. + */ + drm_dbg_kms(&dev_priv->drm, + "VDD left on by BIOS, adjusting state tracking\n"); + intel_display_power_get(dev_priv, intel_aux_power_domain(dig_port)); + + edp_panel_vdd_schedule_off(intel_dp); +} + +static enum pipe vlv_active_pipe(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; + enum pipe pipe; + + if (intel_dp_port_enabled(dev_priv, intel_dp->output_reg, + encoder->port, &pipe)) + return pipe; + + return INVALID_PIPE; +} + +void intel_dp_encoder_reset(struct drm_encoder *encoder) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->dev); + struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(encoder)); + struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp); + intel_wakeref_t wakeref; + + if (!HAS_DDI(dev_priv)) + intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg); + + if (lspcon->active) + lspcon_resume(lspcon); + + intel_dp->reset_link_params = true; + + if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) && + !intel_dp_is_edp(intel_dp)) + return; + + with_pps_lock(intel_dp, wakeref) { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + intel_dp->active_pipe = vlv_active_pipe(intel_dp); + + if (intel_dp_is_edp(intel_dp)) { + /* + * Reinit the power sequencer, in case BIOS did + * something nasty with it. + */ + intel_dp_pps_init(intel_dp); + intel_edp_panel_vdd_sanitize(intel_dp); + } + } +} + +static int intel_modeset_tile_group(struct intel_atomic_state *state, + int tile_group_id) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct drm_connector_list_iter conn_iter; + struct drm_connector *connector; + int ret = 0; + + drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + struct drm_connector_state *conn_state; + struct intel_crtc_state *crtc_state; + struct intel_crtc *crtc; + + if (!connector->has_tile || + connector->tile_group->id != tile_group_id) + continue; + + conn_state = drm_atomic_get_connector_state(&state->base, + connector); + if (IS_ERR(conn_state)) { + ret = PTR_ERR(conn_state); + break; + } + + crtc = to_intel_crtc(conn_state->crtc); + + if (!crtc) + continue; + + crtc_state = intel_atomic_get_new_crtc_state(state, crtc); + crtc_state->uapi.mode_changed = true; + + ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); + if (ret) + break; + } + drm_connector_list_iter_end(&conn_iter); + + return ret; +} + +static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders) +{ + struct drm_i915_private *dev_priv = to_i915(state->base.dev); + struct intel_crtc *crtc; + + if (transcoders == 0) + return 0; + + for_each_intel_crtc(&dev_priv->drm, crtc) { + struct intel_crtc_state *crtc_state; + int ret; + + crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + + if (!crtc_state->hw.enable) + continue; + + if (!(transcoders & BIT(crtc_state->cpu_transcoder))) + continue; + + crtc_state->uapi.mode_changed = true; + + ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base); + if (ret) + return ret; + + ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); + if (ret) + return ret; + + transcoders &= ~BIT(crtc_state->cpu_transcoder); + } + + drm_WARN_ON(&dev_priv->drm, transcoders != 0); + + return 0; +} + +static int intel_modeset_synced_crtcs(struct intel_atomic_state *state, + struct drm_connector *connector) +{ + const struct drm_connector_state *old_conn_state = + drm_atomic_get_old_connector_state(&state->base, connector); + const struct intel_crtc_state *old_crtc_state; + struct intel_crtc *crtc; + u8 transcoders; + + crtc = to_intel_crtc(old_conn_state->crtc); + if (!crtc) + return 0; + + old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc); + + if (!old_crtc_state->hw.active) + return 0; + + transcoders = old_crtc_state->sync_mode_slaves_mask; + if (old_crtc_state->master_transcoder != INVALID_TRANSCODER) + transcoders |= BIT(old_crtc_state->master_transcoder); + + return intel_modeset_affected_transcoders(state, + transcoders); +} + +static int intel_dp_connector_atomic_check(struct drm_connector *conn, + struct drm_atomic_state *_state) +{ + struct drm_i915_private *dev_priv = to_i915(conn->dev); + struct intel_atomic_state *state = to_intel_atomic_state(_state); + int ret; + + ret = intel_digital_connector_atomic_check(conn, &state->base); + if (ret) + return ret; + + /* + * We don't enable port sync on BDW due to missing w/as and + * due to not having adjusted the modeset sequence appropriately. + */ + if (INTEL_GEN(dev_priv) < 9) + return 0; + + if (!intel_connector_needs_modeset(state, conn)) + return 0; + + if (conn->has_tile) { + ret = intel_modeset_tile_group(state, conn->tile_group->id); + if (ret) + return ret; + } + + return intel_modeset_synced_crtcs(state, conn); +} + +static const struct drm_connector_funcs intel_dp_connector_funcs = { + .force = intel_dp_force, + .fill_modes = drm_helper_probe_single_connector_modes, + .atomic_get_property = intel_digital_connector_atomic_get_property, + .atomic_set_property = intel_digital_connector_atomic_set_property, + .late_register = intel_dp_connector_register, + .early_unregister = intel_dp_connector_unregister, + .destroy = intel_connector_destroy, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .atomic_duplicate_state = intel_digital_connector_duplicate_state, +}; + +static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { + .detect_ctx = intel_dp_detect, + .get_modes = intel_dp_get_modes, + .mode_valid = intel_dp_mode_valid, + .atomic_check = intel_dp_connector_atomic_check, +}; + +static const struct drm_encoder_funcs intel_dp_enc_funcs = { + .reset = intel_dp_encoder_reset, + .destroy = intel_dp_encoder_destroy, +}; + +static bool intel_edp_have_power(struct intel_dp *intel_dp) +{ + intel_wakeref_t wakeref; + bool have_power = false; + + with_pps_lock(intel_dp, wakeref) { + have_power = edp_have_panel_power(intel_dp) && + edp_have_panel_vdd(intel_dp); + } + + return have_power; +} + +enum irqreturn +intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd) +{ + struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); + struct intel_dp *intel_dp = &dig_port->dp; + + if (dig_port->base.type == INTEL_OUTPUT_EDP && + (long_hpd || !intel_edp_have_power(intel_dp))) { + /* + * vdd off can generate a long/short pulse on eDP which + * would require vdd on to handle it, and thus we + * would end up in an endless cycle of + * "vdd off -> long/short hpd -> vdd on -> detect -> vdd off -> ..." + */ + drm_dbg_kms(&i915->drm, + "ignoring %s hpd on eDP [ENCODER:%d:%s]\n", + long_hpd ? "long" : "short", + dig_port->base.base.base.id, + dig_port->base.base.name); + return IRQ_HANDLED; + } + + drm_dbg_kms(&i915->drm, "got hpd irq on [ENCODER:%d:%s] - %s\n", + dig_port->base.base.base.id, + dig_port->base.base.name, + long_hpd ? "long" : "short"); + + if (long_hpd) { + intel_dp->reset_link_params = true; + return IRQ_NONE; + } + + if (intel_dp->is_mst) { + if (!intel_dp_check_mst_status(intel_dp)) + return IRQ_NONE; + } else if (!intel_dp_short_pulse(intel_dp)) { + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +/* check the VBT to see whether the eDP is on another port */ +bool intel_dp_is_port_edp(struct drm_i915_private *dev_priv, enum port port) +{ + /* + * eDP not supported on g4x. so bail out early just + * for a bit extra safety in case the VBT is bonkers. + */ + if (INTEL_GEN(dev_priv) < 5) + return false; + + if (INTEL_GEN(dev_priv) < 9 && port == PORT_A) + return true; + + return intel_bios_is_port_edp(dev_priv, port); +} + +static void +intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->dev); + enum port port = dp_to_dig_port(intel_dp)->base.port; + + if (!intel_dp_is_edp(intel_dp)) + drm_connector_attach_dp_subconnector_property(connector); + + if (!IS_G4X(dev_priv) && port != PORT_A) + intel_attach_force_audio_property(connector); + + intel_attach_broadcast_rgb_property(connector); + if (HAS_GMCH(dev_priv)) + drm_connector_attach_max_bpc_property(connector, 6, 10); + else if (INTEL_GEN(dev_priv) >= 5) + drm_connector_attach_max_bpc_property(connector, 6, 12); + + intel_attach_colorspace_property(connector); + + if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 11) + drm_object_attach_property(&connector->base, + connector->dev->mode_config.hdr_output_metadata_property, + 0); + + if (intel_dp_is_edp(intel_dp)) { + u32 allowed_scalers; + + allowed_scalers = BIT(DRM_MODE_SCALE_ASPECT) | BIT(DRM_MODE_SCALE_FULLSCREEN); + if (!HAS_GMCH(dev_priv)) + allowed_scalers |= BIT(DRM_MODE_SCALE_CENTER); + + drm_connector_attach_scaling_mode_property(connector, allowed_scalers); + + connector->state->scaling_mode = DRM_MODE_SCALE_ASPECT; + + } +} + +static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp) +{ + intel_dp->panel_power_off_time = ktime_get_boottime(); + intel_dp->last_power_on = jiffies; + intel_dp->last_backlight_off = jiffies; +} + +static void +intel_pps_readout_hw_state(struct intel_dp *intel_dp, struct edp_power_seq *seq) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u32 pp_on, pp_off, pp_ctl; + struct pps_registers regs; + + intel_pps_get_registers(intel_dp, ®s); + + pp_ctl = ilk_get_pp_control(intel_dp); + + /* Ensure PPS is unlocked */ + if (!HAS_DDI(dev_priv)) + intel_de_write(dev_priv, regs.pp_ctrl, pp_ctl); + + pp_on = intel_de_read(dev_priv, regs.pp_on); + pp_off = intel_de_read(dev_priv, regs.pp_off); + + /* Pull timing values out of registers */ + seq->t1_t3 = REG_FIELD_GET(PANEL_POWER_UP_DELAY_MASK, pp_on); + seq->t8 = REG_FIELD_GET(PANEL_LIGHT_ON_DELAY_MASK, pp_on); + seq->t9 = REG_FIELD_GET(PANEL_LIGHT_OFF_DELAY_MASK, pp_off); + seq->t10 = REG_FIELD_GET(PANEL_POWER_DOWN_DELAY_MASK, pp_off); + + if (i915_mmio_reg_valid(regs.pp_div)) { + u32 pp_div; + + pp_div = intel_de_read(dev_priv, regs.pp_div); + + seq->t11_t12 = REG_FIELD_GET(PANEL_POWER_CYCLE_DELAY_MASK, pp_div) * 1000; + } else { + seq->t11_t12 = REG_FIELD_GET(BXT_POWER_CYCLE_DELAY_MASK, pp_ctl) * 1000; + } +} + +static void +intel_pps_dump_state(const char *state_name, const struct edp_power_seq *seq) +{ + DRM_DEBUG_KMS("%s t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", + state_name, + seq->t1_t3, seq->t8, seq->t9, seq->t10, seq->t11_t12); +} + +static void +intel_pps_verify_state(struct intel_dp *intel_dp) +{ + struct edp_power_seq hw; + struct edp_power_seq *sw = &intel_dp->pps_delays; + + intel_pps_readout_hw_state(intel_dp, &hw); + + if (hw.t1_t3 != sw->t1_t3 || hw.t8 != sw->t8 || hw.t9 != sw->t9 || + hw.t10 != sw->t10 || hw.t11_t12 != sw->t11_t12) { + DRM_ERROR("PPS state mismatch\n"); + intel_pps_dump_state("sw", sw); + intel_pps_dump_state("hw", &hw); + } +} + +static void +intel_dp_init_panel_power_sequencer(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct edp_power_seq cur, vbt, spec, + *final = &intel_dp->pps_delays; + + lockdep_assert_held(&dev_priv->pps_mutex); + + /* already initialized? */ + if (final->t11_t12 != 0) + return; + + intel_pps_readout_hw_state(intel_dp, &cur); + + intel_pps_dump_state("cur", &cur); + + vbt = dev_priv->vbt.edp.pps; + /* On Toshiba Satellite P50-C-18C system the VBT T12 delay + * of 500ms appears to be too short. Ocassionally the panel + * just fails to power back on. Increasing the delay to 800ms + * seems sufficient to avoid this problem. + */ + if (dev_priv->quirks & QUIRK_INCREASE_T12_DELAY) { + vbt.t11_t12 = max_t(u16, vbt.t11_t12, 1300 * 10); + drm_dbg_kms(&dev_priv->drm, + "Increasing T12 panel delay as per the quirk to %d\n", + vbt.t11_t12); + } + /* T11_T12 delay is special and actually in units of 100ms, but zero + * based in the hw (so we need to add 100 ms). But the sw vbt + * table multiplies it with 1000 to make it in units of 100usec, + * too. */ + vbt.t11_t12 += 100 * 10; + + /* Upper limits from eDP 1.3 spec. Note that we use the clunky units of + * our hw here, which are all in 100usec. */ + spec.t1_t3 = 210 * 10; + spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */ + spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */ + spec.t10 = 500 * 10; + /* This one is special and actually in units of 100ms, but zero + * based in the hw (so we need to add 100 ms). But the sw vbt + * table multiplies it with 1000 to make it in units of 100usec, + * too. */ + spec.t11_t12 = (510 + 100) * 10; + + intel_pps_dump_state("vbt", &vbt); + + /* Use the max of the register settings and vbt. If both are + * unset, fall back to the spec limits. */ +#define assign_final(field) final->field = (max(cur.field, vbt.field) == 0 ? \ + spec.field : \ + max(cur.field, vbt.field)) + assign_final(t1_t3); + assign_final(t8); + assign_final(t9); + assign_final(t10); + assign_final(t11_t12); +#undef assign_final + +#define get_delay(field) (DIV_ROUND_UP(final->field, 10)) + intel_dp->panel_power_up_delay = get_delay(t1_t3); + intel_dp->backlight_on_delay = get_delay(t8); + intel_dp->backlight_off_delay = get_delay(t9); + intel_dp->panel_power_down_delay = get_delay(t10); + intel_dp->panel_power_cycle_delay = get_delay(t11_t12); +#undef get_delay + + drm_dbg_kms(&dev_priv->drm, + "panel power up delay %d, power down delay %d, power cycle delay %d\n", + intel_dp->panel_power_up_delay, + intel_dp->panel_power_down_delay, + intel_dp->panel_power_cycle_delay); + + drm_dbg_kms(&dev_priv->drm, "backlight on delay %d, off delay %d\n", + intel_dp->backlight_on_delay, + intel_dp->backlight_off_delay); + + /* + * We override the HW backlight delays to 1 because we do manual waits + * on them. For T8, even BSpec recommends doing it. For T9, if we + * don't do this, we'll end up waiting for the backlight off delay + * twice: once when we do the manual sleep, and once when we disable + * the panel and wait for the PP_STATUS bit to become zero. + */ + final->t8 = 1; + final->t9 = 1; + + /* + * HW has only a 100msec granularity for t11_t12 so round it up + * accordingly. + */ + final->t11_t12 = roundup(final->t11_t12, 100 * 10); +} + +static void +intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp, + bool force_disable_vdd) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + u32 pp_on, pp_off, port_sel = 0; + int div = RUNTIME_INFO(dev_priv)->rawclk_freq / 1000; + struct pps_registers regs; + enum port port = dp_to_dig_port(intel_dp)->base.port; + const struct edp_power_seq *seq = &intel_dp->pps_delays; + + lockdep_assert_held(&dev_priv->pps_mutex); + + intel_pps_get_registers(intel_dp, ®s); + + /* + * On some VLV machines the BIOS can leave the VDD + * enabled even on power sequencers which aren't + * hooked up to any port. This would mess up the + * power domain tracking the first time we pick + * one of these power sequencers for use since + * edp_panel_vdd_on() would notice that the VDD was + * already on and therefore wouldn't grab the power + * domain reference. Disable VDD first to avoid this. + * This also avoids spuriously turning the VDD on as + * soon as the new power sequencer gets initialized. + */ + if (force_disable_vdd) { + u32 pp = ilk_get_pp_control(intel_dp); + + drm_WARN(&dev_priv->drm, pp & PANEL_POWER_ON, + "Panel power already on\n"); + + if (pp & EDP_FORCE_VDD) + drm_dbg_kms(&dev_priv->drm, + "VDD already on, disabling first\n"); + + pp &= ~EDP_FORCE_VDD; + + intel_de_write(dev_priv, regs.pp_ctrl, pp); + } + + pp_on = REG_FIELD_PREP(PANEL_POWER_UP_DELAY_MASK, seq->t1_t3) | + REG_FIELD_PREP(PANEL_LIGHT_ON_DELAY_MASK, seq->t8); + pp_off = REG_FIELD_PREP(PANEL_LIGHT_OFF_DELAY_MASK, seq->t9) | + REG_FIELD_PREP(PANEL_POWER_DOWN_DELAY_MASK, seq->t10); + + /* Haswell doesn't have any port selection bits for the panel + * power sequencer any more. */ + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + port_sel = PANEL_PORT_SELECT_VLV(port); + } else if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) { + switch (port) { + case PORT_A: + port_sel = PANEL_PORT_SELECT_DPA; + break; + case PORT_C: + port_sel = PANEL_PORT_SELECT_DPC; + break; + case PORT_D: + port_sel = PANEL_PORT_SELECT_DPD; + break; + default: + MISSING_CASE(port); + break; + } + } + + pp_on |= port_sel; + + intel_de_write(dev_priv, regs.pp_on, pp_on); + intel_de_write(dev_priv, regs.pp_off, pp_off); + + /* + * Compute the divisor for the pp clock, simply match the Bspec formula. + */ + if (i915_mmio_reg_valid(regs.pp_div)) { + intel_de_write(dev_priv, regs.pp_div, + REG_FIELD_PREP(PP_REFERENCE_DIVIDER_MASK, (100 * div) / 2 - 1) | REG_FIELD_PREP(PANEL_POWER_CYCLE_DELAY_MASK, DIV_ROUND_UP(seq->t11_t12, 1000))); + } else { + u32 pp_ctl; + + pp_ctl = intel_de_read(dev_priv, regs.pp_ctrl); + pp_ctl &= ~BXT_POWER_CYCLE_DELAY_MASK; + pp_ctl |= REG_FIELD_PREP(BXT_POWER_CYCLE_DELAY_MASK, DIV_ROUND_UP(seq->t11_t12, 1000)); + intel_de_write(dev_priv, regs.pp_ctrl, pp_ctl); + } + + drm_dbg_kms(&dev_priv->drm, + "panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n", + intel_de_read(dev_priv, regs.pp_on), + intel_de_read(dev_priv, regs.pp_off), + i915_mmio_reg_valid(regs.pp_div) ? + intel_de_read(dev_priv, regs.pp_div) : + (intel_de_read(dev_priv, regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK)); +} + +static void intel_dp_pps_init(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + vlv_initial_power_sequencer_setup(intel_dp); + } else { + intel_dp_init_panel_power_sequencer(intel_dp); + intel_dp_init_panel_power_sequencer_registers(intel_dp, false); + } +} + +/** + * intel_dp_set_drrs_state - program registers for RR switch to take effect + * @dev_priv: i915 device + * @crtc_state: a pointer to the active intel_crtc_state + * @refresh_rate: RR to be programmed + * + * This function gets called when refresh rate (RR) has to be changed from + * one frequency to another. Switches can be between high and low RR + * supported by the panel or to any other RR based on media playback (in + * this case, RR value needs to be passed from user space). + * + * The caller of this function needs to take a lock on dev_priv->drrs. + */ +static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv, + const struct intel_crtc_state *crtc_state, + int refresh_rate) +{ + struct intel_dp *intel_dp = dev_priv->drrs.dp; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc); + enum drrs_refresh_rate_type index = DRRS_HIGH_RR; + + if (refresh_rate <= 0) { + drm_dbg_kms(&dev_priv->drm, + "Refresh rate should be positive non-zero.\n"); + return; + } + + if (intel_dp == NULL) { + drm_dbg_kms(&dev_priv->drm, "DRRS not supported.\n"); + return; + } + + if (!intel_crtc) { + drm_dbg_kms(&dev_priv->drm, + "DRRS: intel_crtc not initialized\n"); + return; + } + + if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) { + drm_dbg_kms(&dev_priv->drm, "Only Seamless DRRS supported.\n"); + return; + } + + if (drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode) == + refresh_rate) + index = DRRS_LOW_RR; + + if (index == dev_priv->drrs.refresh_rate_type) { + drm_dbg_kms(&dev_priv->drm, + "DRRS requested for previously set RR...ignoring\n"); + return; + } + + if (!crtc_state->hw.active) { + drm_dbg_kms(&dev_priv->drm, + "eDP encoder disabled. CRTC not Active\n"); + return; + } + + if (INTEL_GEN(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) { + switch (index) { + case DRRS_HIGH_RR: + intel_dp_set_m_n(crtc_state, M1_N1); + break; + case DRRS_LOW_RR: + intel_dp_set_m_n(crtc_state, M2_N2); + break; + case DRRS_MAX_RR: + default: + drm_err(&dev_priv->drm, + "Unsupported refreshrate type\n"); + } + } else if (INTEL_GEN(dev_priv) > 6) { + i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder); + u32 val; + + val = intel_de_read(dev_priv, reg); + if (index > DRRS_HIGH_RR) { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV; + else + val |= PIPECONF_EDP_RR_MODE_SWITCH; + } else { + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV; + else + val &= ~PIPECONF_EDP_RR_MODE_SWITCH; + } + intel_de_write(dev_priv, reg, val); + } + + dev_priv->drrs.refresh_rate_type = index; + + drm_dbg_kms(&dev_priv->drm, "eDP Refresh Rate set to : %dHz\n", + refresh_rate); +} + +static void +intel_edp_drrs_enable_locked(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + dev_priv->drrs.busy_frontbuffer_bits = 0; + dev_priv->drrs.dp = intel_dp; +} + +/** + * intel_edp_drrs_enable - init drrs struct if supported + * @intel_dp: DP struct + * @crtc_state: A pointer to the active crtc state. + * + * Initializes frontbuffer_bits and drrs.dp + */ +void intel_edp_drrs_enable(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (!crtc_state->has_drrs) + return; + + drm_dbg_kms(&dev_priv->drm, "Enabling DRRS\n"); + + mutex_lock(&dev_priv->drrs.mutex); + + if (dev_priv->drrs.dp) { + drm_warn(&dev_priv->drm, "DRRS already enabled\n"); + goto unlock; + } + + intel_edp_drrs_enable_locked(intel_dp); + +unlock: + mutex_unlock(&dev_priv->drrs.mutex); +} + +static void +intel_edp_drrs_disable_locked(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) { + int refresh; + + refresh = drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode); + intel_dp_set_drrs_state(dev_priv, crtc_state, refresh); + } + + dev_priv->drrs.dp = NULL; +} + +/** + * intel_edp_drrs_disable - Disable DRRS + * @intel_dp: DP struct + * @old_crtc_state: Pointer to old crtc_state. + * + */ +void intel_edp_drrs_disable(struct intel_dp *intel_dp, + const struct intel_crtc_state *old_crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (!old_crtc_state->has_drrs) + return; + + mutex_lock(&dev_priv->drrs.mutex); + if (!dev_priv->drrs.dp) { + mutex_unlock(&dev_priv->drrs.mutex); + return; + } + + intel_edp_drrs_disable_locked(intel_dp, old_crtc_state); + mutex_unlock(&dev_priv->drrs.mutex); + + cancel_delayed_work_sync(&dev_priv->drrs.work); +} + +/** + * intel_edp_drrs_update - Update DRRS state + * @intel_dp: Intel DP + * @crtc_state: new CRTC state + * + * This function will update DRRS states, disabling or enabling DRRS when + * executing fastsets. For full modeset, intel_edp_drrs_disable() and + * intel_edp_drrs_enable() should be called instead. + */ +void +intel_edp_drrs_update(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + if (dev_priv->drrs.type != SEAMLESS_DRRS_SUPPORT) + return; + + mutex_lock(&dev_priv->drrs.mutex); + + /* New state matches current one? */ + if (crtc_state->has_drrs == !!dev_priv->drrs.dp) + goto unlock; + + if (crtc_state->has_drrs) + intel_edp_drrs_enable_locked(intel_dp); + else + intel_edp_drrs_disable_locked(intel_dp, crtc_state); + +unlock: + mutex_unlock(&dev_priv->drrs.mutex); +} + +static void intel_edp_drrs_downclock_work(struct work_struct *work) +{ + struct drm_i915_private *dev_priv = + container_of(work, typeof(*dev_priv), drrs.work.work); + struct intel_dp *intel_dp; + + mutex_lock(&dev_priv->drrs.mutex); + + intel_dp = dev_priv->drrs.dp; + + if (!intel_dp) + goto unlock; + + /* + * The delayed work can race with an invalidate hence we need to + * recheck. + */ + + if (dev_priv->drrs.busy_frontbuffer_bits) + goto unlock; + + if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) { + struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, + drm_mode_vrefresh(intel_dp->attached_connector->panel.downclock_mode)); + } + +unlock: + mutex_unlock(&dev_priv->drrs.mutex); +} + +/** + * intel_edp_drrs_invalidate - Disable Idleness DRRS + * @dev_priv: i915 device + * @frontbuffer_bits: frontbuffer plane tracking bits + * + * This function gets called everytime rendering on the given planes start. + * Hence DRRS needs to be Upclocked, i.e. (LOW_RR -> HIGH_RR). + * + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. + */ +void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv, + unsigned int frontbuffer_bits) +{ + struct intel_dp *intel_dp; + struct drm_crtc *crtc; + enum pipe pipe; + + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) + return; + + cancel_delayed_work(&dev_priv->drrs.work); + + mutex_lock(&dev_priv->drrs.mutex); + + intel_dp = dev_priv->drrs.dp; + if (!intel_dp) { + mutex_unlock(&dev_priv->drrs.mutex); + return; + } + + crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + pipe = to_intel_crtc(crtc)->pipe; + + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); + dev_priv->drrs.busy_frontbuffer_bits |= frontbuffer_bits; + + /* invalidate means busy screen hence upclock */ + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); + + mutex_unlock(&dev_priv->drrs.mutex); +} + +/** + * intel_edp_drrs_flush - Restart Idleness DRRS + * @dev_priv: i915 device + * @frontbuffer_bits: frontbuffer plane tracking bits + * + * This function gets called every time rendering on the given planes has + * completed or flip on a crtc is completed. So DRRS should be upclocked + * (LOW_RR -> HIGH_RR). And also Idleness detection should be started again, + * if no other planes are dirty. + * + * Dirty frontbuffers relevant to DRRS are tracked in busy_frontbuffer_bits. + */ +void intel_edp_drrs_flush(struct drm_i915_private *dev_priv, + unsigned int frontbuffer_bits) +{ + struct intel_dp *intel_dp; + struct drm_crtc *crtc; + enum pipe pipe; + + if (dev_priv->drrs.type == DRRS_NOT_SUPPORTED) + return; + + cancel_delayed_work(&dev_priv->drrs.work); + + mutex_lock(&dev_priv->drrs.mutex); + + intel_dp = dev_priv->drrs.dp; + if (!intel_dp) { + mutex_unlock(&dev_priv->drrs.mutex); + return; + } + + crtc = dp_to_dig_port(intel_dp)->base.base.crtc; + pipe = to_intel_crtc(crtc)->pipe; + + frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe); + dev_priv->drrs.busy_frontbuffer_bits &= ~frontbuffer_bits; + + /* flush means busy screen hence upclock */ + if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR) + intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config, + drm_mode_vrefresh(intel_dp->attached_connector->panel.fixed_mode)); + + /* + * flush also means no more activity hence schedule downclock, if all + * other fbs are quiescent too + */ + if (!dev_priv->drrs.busy_frontbuffer_bits) + schedule_delayed_work(&dev_priv->drrs.work, + msecs_to_jiffies(1000)); + mutex_unlock(&dev_priv->drrs.mutex); +} + +/** + * DOC: Display Refresh Rate Switching (DRRS) + * + * Display Refresh Rate Switching (DRRS) is a power conservation feature + * which enables swtching between low and high refresh rates, + * dynamically, based on the usage scenario. This feature is applicable + * for internal panels. + * + * Indication that the panel supports DRRS is given by the panel EDID, which + * would list multiple refresh rates for one resolution. + * + * DRRS is of 2 types - static and seamless. + * Static DRRS involves changing refresh rate (RR) by doing a full modeset + * (may appear as a blink on screen) and is used in dock-undock scenario. + * Seamless DRRS involves changing RR without any visual effect to the user + * and can be used during normal system usage. This is done by programming + * certain registers. + * + * Support for static/seamless DRRS may be indicated in the VBT based on + * inputs from the panel spec. + * + * DRRS saves power by switching to low RR based on usage scenarios. + * + * The implementation is based on frontbuffer tracking implementation. When + * there is a disturbance on the screen triggered by user activity or a periodic + * system activity, DRRS is disabled (RR is changed to high RR). When there is + * no movement on screen, after a timeout of 1 second, a switch to low RR is + * made. + * + * For integration with frontbuffer tracking code, intel_edp_drrs_invalidate() + * and intel_edp_drrs_flush() are called. + * + * DRRS can be further extended to support other internal panels and also + * the scenario of video playback wherein RR is set based on the rate + * requested by userspace. + */ + +/** + * intel_dp_drrs_init - Init basic DRRS work and mutex. + * @connector: eDP connector + * @fixed_mode: preferred mode of panel + * + * This function is called only once at driver load to initialize basic + * DRRS stuff. + * + * Returns: + * Downclock mode if panel supports it, else return NULL. + * DRRS support is determined by the presence of downclock mode (apart + * from VBT setting). + */ +static struct drm_display_mode * +intel_dp_drrs_init(struct intel_connector *connector, + struct drm_display_mode *fixed_mode) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + struct drm_display_mode *downclock_mode = NULL; + + INIT_DELAYED_WORK(&dev_priv->drrs.work, intel_edp_drrs_downclock_work); + mutex_init(&dev_priv->drrs.mutex); + + if (INTEL_GEN(dev_priv) <= 6) { + drm_dbg_kms(&dev_priv->drm, + "DRRS supported for Gen7 and above\n"); + return NULL; + } + + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) { + drm_dbg_kms(&dev_priv->drm, "VBT doesn't support DRRS\n"); + return NULL; + } + + downclock_mode = intel_panel_edid_downclock_mode(connector, fixed_mode); + if (!downclock_mode) { + drm_dbg_kms(&dev_priv->drm, + "Downclock mode is not found. DRRS not supported\n"); + return NULL; + } + + dev_priv->drrs.type = dev_priv->vbt.drrs_type; + + dev_priv->drrs.refresh_rate_type = DRRS_HIGH_RR; + drm_dbg_kms(&dev_priv->drm, + "seamless DRRS supported for eDP panel.\n"); + return downclock_mode; +} + +static bool intel_edp_init_connector(struct intel_dp *intel_dp, + struct intel_connector *intel_connector) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct drm_device *dev = &dev_priv->drm; + struct drm_connector *connector = &intel_connector->base; + struct drm_display_mode *fixed_mode = NULL; + struct drm_display_mode *downclock_mode = NULL; + bool has_dpcd; + enum pipe pipe = INVALID_PIPE; + intel_wakeref_t wakeref; + struct edid *edid; + + if (!intel_dp_is_edp(intel_dp)) + return true; + + INIT_DELAYED_WORK(&intel_dp->panel_vdd_work, edp_panel_vdd_work); + + /* + * On IBX/CPT we may get here with LVDS already registered. Since the + * driver uses the only internal power sequencer available for both + * eDP and LVDS bail out early in this case to prevent interfering + * with an already powered-on LVDS power sequencer. + */ + if (intel_get_lvds_encoder(dev_priv)) { + drm_WARN_ON(dev, + !(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))); + drm_info(&dev_priv->drm, + "LVDS was detected, not registering eDP\n"); + + return false; + } + + with_pps_lock(intel_dp, wakeref) { + intel_dp_init_panel_power_timestamps(intel_dp); + intel_dp_pps_init(intel_dp); + intel_edp_panel_vdd_sanitize(intel_dp); + } + + /* Cache DPCD and EDID for edp. */ + has_dpcd = intel_edp_init_dpcd(intel_dp); + + if (!has_dpcd) { + /* if this fails, presume the device is a ghost */ + drm_info(&dev_priv->drm, + "failed to retrieve link info, disabling eDP\n"); + goto out_vdd_off; + } + + mutex_lock(&dev->mode_config.mutex); + edid = drm_get_edid(connector, &intel_dp->aux.ddc); + if (edid) { + if (drm_add_edid_modes(connector, edid)) { + drm_connector_update_edid_property(connector, edid); + intel_dp->edid_quirks = drm_dp_get_edid_quirks(edid); + } else { + kfree(edid); + edid = ERR_PTR(-EINVAL); + } + } else { + edid = ERR_PTR(-ENOENT); + } + intel_connector->edid = edid; + + fixed_mode = intel_panel_edid_fixed_mode(intel_connector); + if (fixed_mode) + downclock_mode = intel_dp_drrs_init(intel_connector, fixed_mode); + + /* fallback to VBT if available for eDP */ + if (!fixed_mode) + fixed_mode = intel_panel_vbt_fixed_mode(intel_connector); + mutex_unlock(&dev->mode_config.mutex); + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + intel_dp->edp_notifier.notifier_call = edp_notify_handler; + register_reboot_notifier(&intel_dp->edp_notifier); + + /* + * Figure out the current pipe for the initial backlight setup. + * If the current pipe isn't valid, try the PPS pipe, and if that + * fails just assume pipe A. + */ + pipe = vlv_active_pipe(intel_dp); + + if (pipe != PIPE_A && pipe != PIPE_B) + pipe = intel_dp->pps_pipe; + + if (pipe != PIPE_A && pipe != PIPE_B) + pipe = PIPE_A; + + drm_dbg_kms(&dev_priv->drm, + "using pipe %c for initial backlight setup\n", + pipe_name(pipe)); + } + + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode); + intel_connector->panel.backlight.power = intel_edp_backlight_power; + intel_panel_setup_backlight(connector, pipe); + + if (fixed_mode) { + drm_connector_set_panel_orientation_with_quirk(connector, + dev_priv->vbt.orientation, + fixed_mode->hdisplay, fixed_mode->vdisplay); + } + + return true; + +out_vdd_off: + cancel_delayed_work_sync(&intel_dp->panel_vdd_work); + /* + * vdd might still be enabled do to the delayed vdd off. + * Make sure vdd is actually turned off here. + */ + with_pps_lock(intel_dp, wakeref) + edp_panel_vdd_off_sync(intel_dp); + + return false; +} + +static void intel_dp_modeset_retry_work_fn(struct work_struct *work) +{ + struct intel_connector *intel_connector; + struct drm_connector *connector; + + intel_connector = container_of(work, typeof(*intel_connector), + modeset_retry_work); + connector = &intel_connector->base; + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, + connector->name); + + /* Grab the locks before changing connector property*/ + mutex_lock(&connector->dev->mode_config.mutex); + /* Set connector link status to BAD and send a Uevent to notify + * userspace to do a modeset. + */ + drm_connector_set_link_status_property(connector, + DRM_MODE_LINK_STATUS_BAD); + mutex_unlock(&connector->dev->mode_config.mutex); + /* Send Hotplug uevent so userspace can reprobe */ + drm_kms_helper_hotplug_event(connector->dev); +} + +bool +intel_dp_init_connector(struct intel_digital_port *dig_port, + struct intel_connector *intel_connector) +{ + struct drm_connector *connector = &intel_connector->base; + struct intel_dp *intel_dp = &dig_port->dp; + struct intel_encoder *intel_encoder = &dig_port->base; + struct drm_device *dev = intel_encoder->base.dev; + struct drm_i915_private *dev_priv = to_i915(dev); + enum port port = intel_encoder->port; + enum phy phy = intel_port_to_phy(dev_priv, port); + int type; + + /* Initialize the work for modeset in case of link train failure */ + INIT_WORK(&intel_connector->modeset_retry_work, + intel_dp_modeset_retry_work_fn); + + if (drm_WARN(dev, dig_port->max_lanes < 1, + "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n", + dig_port->max_lanes, intel_encoder->base.base.id, + intel_encoder->base.name)) + return false; + + intel_dp_set_source_rates(intel_dp); + intel_dp_set_default_sink_rates(intel_dp); + intel_dp_set_common_rates(intel_dp); + + intel_dp->reset_link_params = true; + intel_dp->pps_pipe = INVALID_PIPE; + intel_dp->active_pipe = INVALID_PIPE; + + /* Preserve the current hw state. */ + intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg); + intel_dp->attached_connector = intel_connector; + + if (intel_dp_is_port_edp(dev_priv, port)) { + /* + * Currently we don't support eDP on TypeC ports, although in + * theory it could work on TypeC legacy ports. + */ + drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy)); + type = DRM_MODE_CONNECTOR_eDP; + } else { + type = DRM_MODE_CONNECTOR_DisplayPort; + } + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + intel_dp->active_pipe = vlv_active_pipe(intel_dp); + + /* + * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but + * for DP the encoder type can be set by the caller to + * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it. + */ + if (type == DRM_MODE_CONNECTOR_eDP) + intel_encoder->type = INTEL_OUTPUT_EDP; + + /* eDP only on port B and/or C on vlv/chv */ + if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) || + IS_CHERRYVIEW(dev_priv)) && + intel_dp_is_edp(intel_dp) && + port != PORT_B && port != PORT_C)) + return false; + + drm_dbg_kms(&dev_priv->drm, + "Adding %s connector on [ENCODER:%d:%s]\n", + type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", + intel_encoder->base.base.id, intel_encoder->base.name); + + drm_connector_init(dev, connector, &intel_dp_connector_funcs, type); + drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); + + if (!HAS_GMCH(dev_priv)) + connector->interlace_allowed = true; + connector->doublescan_allowed = 0; + + intel_connector->polled = DRM_CONNECTOR_POLL_HPD; + + intel_dp_aux_init(intel_dp); + + intel_connector_attach_encoder(intel_connector, intel_encoder); + + if (HAS_DDI(dev_priv)) + intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; + else + intel_connector->get_hw_state = intel_connector_get_hw_state; + + /* init MST on ports that can support it */ + intel_dp_mst_encoder_init(dig_port, + intel_connector->base.base.id); + + if (!intel_edp_init_connector(intel_dp, intel_connector)) { + intel_dp_aux_fini(intel_dp); + intel_dp_mst_encoder_cleanup(dig_port); + goto fail; + } + + intel_dp_add_properties(intel_dp, connector); + + if (is_hdcp_supported(dev_priv, port) && !intel_dp_is_edp(intel_dp)) { + int ret = intel_dp_init_hdcp(dig_port, intel_connector); + if (ret) + drm_dbg_kms(&dev_priv->drm, + "HDCP init failed, skipping.\n"); + } + + /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written + * 0xd. Failure to do so will result in spurious interrupts being + * generated on the port when a cable is not attached. + */ + if (IS_G45(dev_priv)) { + u32 temp = intel_de_read(dev_priv, PEG_BAND_GAP_DATA); + intel_de_write(dev_priv, PEG_BAND_GAP_DATA, + (temp & ~0xf) | 0xd); + } + + return true; + +fail: + drm_connector_cleanup(connector); + + return false; +} + +bool intel_dp_init(struct drm_i915_private *dev_priv, + i915_reg_t output_reg, + enum port port) +{ + struct intel_digital_port *dig_port; + struct intel_encoder *intel_encoder; + struct drm_encoder *encoder; + struct intel_connector *intel_connector; + + dig_port = kzalloc(sizeof(*dig_port), GFP_KERNEL); + if (!dig_port) + return false; + + intel_connector = intel_connector_alloc(); + if (!intel_connector) + goto err_connector_alloc; + + intel_encoder = &dig_port->base; + encoder = &intel_encoder->base; + + mutex_init(&dig_port->hdcp_mutex); + + if (drm_encoder_init(&dev_priv->drm, &intel_encoder->base, + &intel_dp_enc_funcs, DRM_MODE_ENCODER_TMDS, + "DP %c", port_name(port))) + goto err_encoder_init; + + intel_encoder->hotplug = intel_dp_hotplug; + intel_encoder->compute_config = intel_dp_compute_config; + intel_encoder->get_hw_state = intel_dp_get_hw_state; + intel_encoder->get_config = intel_dp_get_config; + intel_encoder->update_pipe = intel_panel_update_backlight; + intel_encoder->suspend = intel_dp_encoder_suspend; + if (IS_CHERRYVIEW(dev_priv)) { + intel_encoder->pre_pll_enable = chv_dp_pre_pll_enable; + intel_encoder->pre_enable = chv_pre_enable_dp; + intel_encoder->enable = vlv_enable_dp; + intel_encoder->disable = vlv_disable_dp; + intel_encoder->post_disable = chv_post_disable_dp; + intel_encoder->post_pll_disable = chv_dp_post_pll_disable; + } else if (IS_VALLEYVIEW(dev_priv)) { + intel_encoder->pre_pll_enable = vlv_dp_pre_pll_enable; + intel_encoder->pre_enable = vlv_pre_enable_dp; + intel_encoder->enable = vlv_enable_dp; + intel_encoder->disable = vlv_disable_dp; + intel_encoder->post_disable = vlv_post_disable_dp; + } else { + intel_encoder->pre_enable = g4x_pre_enable_dp; + intel_encoder->enable = g4x_enable_dp; + intel_encoder->disable = g4x_disable_dp; + intel_encoder->post_disable = g4x_post_disable_dp; + } + + if ((IS_IVYBRIDGE(dev_priv) && port == PORT_A) || + (HAS_PCH_CPT(dev_priv) && port != PORT_A)) + dig_port->dp.set_link_train = cpt_set_link_train; + else + dig_port->dp.set_link_train = g4x_set_link_train; + + if (IS_CHERRYVIEW(dev_priv)) + dig_port->dp.set_signal_levels = chv_set_signal_levels; + else if (IS_VALLEYVIEW(dev_priv)) + dig_port->dp.set_signal_levels = vlv_set_signal_levels; + else if (IS_IVYBRIDGE(dev_priv) && port == PORT_A) + dig_port->dp.set_signal_levels = ivb_cpu_edp_set_signal_levels; + else if (IS_GEN(dev_priv, 6) && port == PORT_A) + dig_port->dp.set_signal_levels = snb_cpu_edp_set_signal_levels; + else + dig_port->dp.set_signal_levels = g4x_set_signal_levels; + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) || + (HAS_PCH_SPLIT(dev_priv) && port != PORT_A)) { + dig_port->dp.preemph_max = intel_dp_pre_empemph_max_3; + dig_port->dp.voltage_max = intel_dp_voltage_max_3; + } else { + dig_port->dp.preemph_max = intel_dp_pre_empemph_max_2; + dig_port->dp.voltage_max = intel_dp_voltage_max_2; + } + + dig_port->dp.output_reg = output_reg; + dig_port->max_lanes = 4; + dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port); + dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port); + + intel_encoder->type = INTEL_OUTPUT_DP; + intel_encoder->power_domain = intel_port_to_power_domain(port); + if (IS_CHERRYVIEW(dev_priv)) { + if (port == PORT_D) + intel_encoder->pipe_mask = BIT(PIPE_C); + else + intel_encoder->pipe_mask = BIT(PIPE_A) | BIT(PIPE_B); + } else { + intel_encoder->pipe_mask = ~0; + } + intel_encoder->cloneable = 0; + intel_encoder->port = port; + intel_encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port); + + dig_port->hpd_pulse = intel_dp_hpd_pulse; + + if (HAS_GMCH(dev_priv)) { + if (IS_GM45(dev_priv)) + dig_port->connected = gm45_digital_port_connected; + else + dig_port->connected = g4x_digital_port_connected; + } else { + if (port == PORT_A) + dig_port->connected = ilk_digital_port_connected; + else + dig_port->connected = ibx_digital_port_connected; + } + + if (port != PORT_A) + intel_infoframe_init(dig_port); + + dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port); + if (!intel_dp_init_connector(dig_port, intel_connector)) + goto err_init_connector; + + return true; + +err_init_connector: + drm_encoder_cleanup(encoder); +err_encoder_init: + kfree(intel_connector); +err_connector_alloc: + kfree(dig_port); + return false; +} + +void intel_dp_mst_suspend(struct drm_i915_private *dev_priv) +{ + struct intel_encoder *encoder; + + for_each_intel_encoder(&dev_priv->drm, encoder) { + struct intel_dp *intel_dp; + + if (encoder->type != INTEL_OUTPUT_DDI) + continue; + + intel_dp = enc_to_intel_dp(encoder); + + if (!intel_dp->can_mst) + continue; + + if (intel_dp->is_mst) + drm_dp_mst_topology_mgr_suspend(&intel_dp->mst_mgr); + } +} + +void intel_dp_mst_resume(struct drm_i915_private *dev_priv) +{ + struct intel_encoder *encoder; + + for_each_intel_encoder(&dev_priv->drm, encoder) { + struct intel_dp *intel_dp; + int ret; + + if (encoder->type != INTEL_OUTPUT_DDI) + continue; + + intel_dp = enc_to_intel_dp(encoder); + + if (!intel_dp->can_mst) + continue; + + ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr, + true); + if (ret) { + intel_dp->is_mst = false; + drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, + false); + } + } +} |