diff options
Diffstat (limited to 'sd/source/ui/dlg/copydlg.cxx')
| -rw-r--r-- | sd/source/ui/dlg/copydlg.cxx | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/sd/source/ui/dlg/copydlg.cxx b/sd/source/ui/dlg/copydlg.cxx new file mode 100644 index 000000000..08d6dac24 --- /dev/null +++ b/sd/source/ui/dlg/copydlg.cxx @@ -0,0 +1,264 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <copydlg.hxx> +#include <svx/colorbox.hxx> +#include <svx/svdpagv.hxx> +#include <sfx2/module.hxx> +#include <svx/xcolit.hxx> +#include <svl/intitem.hxx> + +#include <unotools/viewoptions.hxx> +#include <svtools/unitconv.hxx> + +#include <sdattr.hrc> +#include <View.hxx> +#include <drawdoc.hxx> + + +namespace sd { + +constexpr char TOKEN = ';'; + +CopyDlg::CopyDlg(weld::Window* pWindow, const SfxItemSet& rInAttrs, ::sd::View* pInView) + : SfxDialogController(pWindow, "modules/sdraw/ui/copydlg.ui", "DuplicateDialog") + , mrOutAttrs(rInAttrs) + , maUIScale(pInView->GetDoc().GetUIScale()) + , mpView(pInView) + , m_xNumFldCopies(m_xBuilder->weld_spin_button("copies")) + , m_xBtnSetViewData(m_xBuilder->weld_button("viewdata")) + , m_xMtrFldMoveX(m_xBuilder->weld_metric_spin_button("x", FieldUnit::CM)) + , m_xMtrFldMoveY(m_xBuilder->weld_metric_spin_button("y", FieldUnit::CM)) + , m_xMtrFldAngle(m_xBuilder->weld_metric_spin_button("angle", FieldUnit::DEGREE)) + , m_xMtrFldWidth(m_xBuilder->weld_metric_spin_button("width", FieldUnit::CM)) + , m_xMtrFldHeight(m_xBuilder->weld_metric_spin_button("height", FieldUnit::CM)) + , m_xFtEndColor(m_xBuilder->weld_label("endlabel")) + , m_xBtnSetDefault(m_xBuilder->weld_button("default")) + , m_xLbStartColor(new ColorListBox(m_xBuilder->weld_menu_button("start"), pWindow)) + , m_xLbEndColor(new ColorListBox(m_xBuilder->weld_menu_button("end"), pWindow)) +{ + m_xLbStartColor->SetSelectHdl( LINK( this, CopyDlg, SelectColorHdl ) ); + m_xBtnSetViewData->connect_clicked( LINK( this, CopyDlg, SetViewData ) ); + m_xBtnSetDefault->connect_clicked( LINK( this, CopyDlg, SetDefault ) ); + + FieldUnit eFUnit( SfxModule::GetCurrentFieldUnit() ); + + SetFieldUnit( *m_xMtrFldMoveX, eFUnit, true ); + SetFieldUnit( *m_xMtrFldMoveY, eFUnit, true ); + SetFieldUnit( *m_xMtrFldWidth, eFUnit, true ); + SetFieldUnit( *m_xMtrFldHeight, eFUnit, true ); + + Reset(); +} + +CopyDlg::~CopyDlg() +{ + SvtViewOptions aDlgOpt(EViewType::Dialog, OStringToOUString(m_xDialog->get_help_id(), RTL_TEXTENCODING_UTF8)); + OUString sStr = + OUString::number(m_xNumFldCopies->get_value()) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldMoveX->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldMoveY->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldAngle->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldWidth->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(m_xMtrFldHeight->get_value(FieldUnit::NONE)) + OUStringChar(TOKEN) + + OUString::number(static_cast<sal_uInt32>(m_xLbStartColor->GetSelectEntryColor())) + OUStringChar(TOKEN) + + OUString::number(static_cast<sal_uInt32>(m_xLbEndColor->GetSelectEntryColor())); + aDlgOpt.SetUserItem("UserItem", css::uno::makeAny(sStr)); +} + +/** + * reads provided item set or evaluate ini string + */ +void CopyDlg::Reset() +{ + // Set Min/Max values + ::tools::Rectangle aRect = mpView->GetAllMarkedRect(); + Size aPageSize = mpView->GetSdrPageView()->GetPage()->GetSize(); + + // tdf#125011 draw/impress sizes are in mm_100th already, "normalize" to + // decimal shift by number of decimal places the widgets are using (2) then + // scale by the ui scaling factor + auto nPageWidth = long(m_xMtrFldMoveX->normalize(aPageSize.Width()) / maUIScale); + auto nPageHeight = long(m_xMtrFldMoveX->normalize(aPageSize.Height()) / maUIScale); + auto nRectWidth = long(m_xMtrFldMoveX->normalize(aRect.GetWidth()) / maUIScale); + auto nRectHeight = long(m_xMtrFldMoveX->normalize(aRect.GetHeight()) / maUIScale); + + m_xMtrFldMoveX->set_range(-nPageWidth, nPageWidth, FieldUnit::MM_100TH); + m_xMtrFldMoveY->set_range(-nPageHeight, nPageHeight, FieldUnit::MM_100TH); + m_xMtrFldWidth->set_range(-nRectWidth, nPageWidth, FieldUnit::MM_100TH); + m_xMtrFldHeight->set_range(-nRectHeight, nPageHeight, FieldUnit::MM_100TH); + + const SfxPoolItem* pPoolItem = nullptr; + OUString aStr; + SvtViewOptions aDlgOpt(EViewType::Dialog, OStringToOUString(m_xDialog->get_help_id(), RTL_TEXTENCODING_UTF8)); + if (aDlgOpt.Exists()) + { + css::uno::Any aUserItem = aDlgOpt.GetUserItem("UserItem"); + aUserItem >>= aStr; + } + + if (aStr.isEmpty()) + { + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_NUMBER, true, &pPoolItem ) ) + m_xNumFldCopies->set_value(static_cast<const SfxUInt16Item*>(pPoolItem)->GetValue()); + else + m_xNumFldCopies->set_value(1); + + long nMoveX = 500; + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_MOVE_X, true, &pPoolItem ) ) + nMoveX = static_cast<const SfxInt32Item*>( pPoolItem )->GetValue(); + SetMetricValue( *m_xMtrFldMoveX, long(nMoveX / maUIScale), MapUnit::Map100thMM); + + long nMoveY = 500; + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_MOVE_Y, true, &pPoolItem ) ) + nMoveY = static_cast<const SfxInt32Item*>( pPoolItem )->GetValue(); + SetMetricValue( *m_xMtrFldMoveY, long(nMoveY / maUIScale), MapUnit::Map100thMM); + + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_ANGLE, true, &pPoolItem ) ) + m_xMtrFldAngle->set_value(static_cast<const SfxInt32Item*>( pPoolItem )->GetValue(), FieldUnit::NONE); + else + m_xMtrFldAngle->set_value(0, FieldUnit::NONE); + + long nWidth = 0; + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_WIDTH, true, &pPoolItem ) ) + nWidth = static_cast<const SfxInt32Item*>( pPoolItem )->GetValue(); + SetMetricValue( *m_xMtrFldWidth, long(nWidth / maUIScale), MapUnit::Map100thMM); + + long nHeight = 0; + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_HEIGHT, true, &pPoolItem ) ) + nHeight = static_cast<const SfxInt32Item*>( pPoolItem )->GetValue(); + SetMetricValue( *m_xMtrFldHeight, long(nHeight / maUIScale), MapUnit::Map100thMM); + + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_START_COLOR, true, &pPoolItem ) ) + { + Color aColor = static_cast<const XColorItem*>( pPoolItem )->GetColorValue(); + m_xLbStartColor->SelectEntry( aColor ); + m_xLbEndColor->SelectEntry( aColor ); + } + else + { + m_xLbStartColor->SetNoSelection(); + m_xLbEndColor->SetNoSelection(); + m_xLbEndColor->set_sensitive(false); + m_xFtEndColor->set_sensitive(false); + } + } + else + { + sal_Int32 nIdx {0}; + m_xNumFldCopies->set_value(aStr.getToken(0, TOKEN, nIdx).toInt64()); + m_xMtrFldMoveX->set_value(aStr.getToken(0, TOKEN, nIdx).toInt64(), FieldUnit::NONE); + m_xMtrFldMoveY->set_value(aStr.getToken(0, TOKEN, nIdx).toInt64(), FieldUnit::NONE); + m_xMtrFldAngle->set_value(aStr.getToken(0, TOKEN, nIdx).toInt64(), FieldUnit::NONE); + m_xMtrFldWidth->set_value(aStr.getToken(0, TOKEN, nIdx).toInt64(), FieldUnit::NONE); + m_xMtrFldHeight->set_value(aStr.getToken(0, TOKEN, nIdx).toInt64(), FieldUnit::NONE); + m_xLbStartColor->SelectEntry( Color( aStr.getToken(0, TOKEN, nIdx).toUInt32() ) ); + m_xLbEndColor->SelectEntry( Color( aStr.getToken(0, TOKEN, nIdx).toUInt32() ) ); + } + +} + +/** + * fills provided item set with dialog box attributes + */ +void CopyDlg::GetAttr( SfxItemSet& rOutAttrs ) +{ + long nMoveX = long( GetCoreValue( *m_xMtrFldMoveX, MapUnit::Map100thMM) * maUIScale); + long nMoveY = long( GetCoreValue( *m_xMtrFldMoveY, MapUnit::Map100thMM) * maUIScale); + long nHeight = long( GetCoreValue( *m_xMtrFldHeight, MapUnit::Map100thMM) * maUIScale); + long nWidth = long( GetCoreValue( *m_xMtrFldWidth, MapUnit::Map100thMM) * maUIScale); + + rOutAttrs.Put( SfxUInt16Item( ATTR_COPY_NUMBER, static_cast<sal_uInt16>(m_xNumFldCopies->get_value()) ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_MOVE_X, nMoveX ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_MOVE_Y, nMoveY ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_ANGLE, static_cast<sal_Int32>(m_xMtrFldAngle->get_value(FieldUnit::DEGREE)) ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_WIDTH, nWidth ) ); + rOutAttrs.Put( SfxInt32Item( ATTR_COPY_HEIGHT, nHeight ) ); + + NamedColor aColor = m_xLbStartColor->GetSelectedEntry(); + rOutAttrs.Put(XColorItem(ATTR_COPY_START_COLOR, aColor.second, aColor.first)); + aColor = m_xLbEndColor->GetSelectedEntry(); + rOutAttrs.Put(XColorItem(ATTR_COPY_END_COLOR, aColor.second, aColor.first)); +} + +/** + * enables and selects end color LB + */ +IMPL_LINK_NOARG(CopyDlg, SelectColorHdl, ColorListBox&, void) +{ + const Color aColor = m_xLbStartColor->GetSelectEntryColor(); + + if (!m_xLbEndColor->get_sensitive()) + { + m_xLbEndColor->SelectEntry(aColor); + m_xLbEndColor->set_sensitive(true); + m_xFtEndColor->set_sensitive(true); + } +} + +/** + * sets values of selection + */ +IMPL_LINK_NOARG(CopyDlg, SetViewData, weld::Button&, void) +{ + ::tools::Rectangle aRect = mpView->GetAllMarkedRect(); + + SetMetricValue( *m_xMtrFldMoveX, long( aRect.GetWidth() / + maUIScale ), MapUnit::Map100thMM); + SetMetricValue( *m_xMtrFldMoveY, long( aRect.GetHeight() / + maUIScale ), MapUnit::Map100thMM); + + // sets color attribute + const SfxPoolItem* pPoolItem = nullptr; + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_START_COLOR, true, &pPoolItem ) ) + { + Color aColor = static_cast<const XColorItem*>( pPoolItem )->GetColorValue(); + m_xLbStartColor->SelectEntry( aColor ); + } +} + +/** + * resets values to default + */ +IMPL_LINK_NOARG(CopyDlg, SetDefault, weld::Button&, void) +{ + m_xNumFldCopies->set_value(1); + + long nValue = 500; + SetMetricValue( *m_xMtrFldMoveX, long(nValue / maUIScale), MapUnit::Map100thMM); + SetMetricValue( *m_xMtrFldMoveY, long(nValue / maUIScale), MapUnit::Map100thMM); + + nValue = 0; + m_xMtrFldAngle->set_value(nValue, FieldUnit::DEGREE); + SetMetricValue( *m_xMtrFldWidth, long(nValue / maUIScale), MapUnit::Map100thMM); + SetMetricValue( *m_xMtrFldHeight, long(nValue / maUIScale), MapUnit::Map100thMM); + + // set color attribute + const SfxPoolItem* pPoolItem = nullptr; + if( SfxItemState::SET == mrOutAttrs.GetItemState( ATTR_COPY_START_COLOR, true, &pPoolItem ) ) + { + Color aColor = static_cast<const XColorItem*>( pPoolItem )->GetColorValue(); + m_xLbStartColor->SelectEntry( aColor ); + m_xLbEndColor->SelectEntry( aColor ); + } +} + +} // end of namespace sd + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |