Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1781 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
new file mode 100644
index 000000000..f01e245cd
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -0,0 +1,757 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+
+#include "dsi_phy.h"
+
+#define S_DIV_ROUND_UP(n, d)	\
+	(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
+
+static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
+				s32 min_result, bool even)
+{
+	s32 v;
+
+	v = (tmax - tmin) * percent;
+	v = S_DIV_ROUND_UP(v, 100) + tmin;
+	if (even && (v & 0x1))
+		return max_t(s32, min_result, v - 1);
+	else
+		return max_t(s32, min_result, v);
+}
+
+static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
+					s32 ui, s32 coeff, s32 pcnt)
+{
+	s32 tmax, tmin, clk_z;
+	s32 temp;
+
+	/* reset */
+	temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	if (tmin > 255) {
+		tmax = 511;
+		clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
+	} else {
+		tmax = 255;
+		clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
+	}
+
+	/* adjust */
+	temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
+	timing->clk_zero = clk_z + 8 - temp;
+}
+
+int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
+			     struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, lpx;
+	s32 tmax, tmin;
+	s32 pcnt0 = 10;
+	s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+	tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
+	tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
+
+	temp = lpx / ui;
+	if (temp & 0x1)
+		timing->hs_rqst = temp;
+	else
+		timing->hs_rqst = max_t(s32, 0, temp - 2);
+
+	/* Calculate clk_zero after clk_prepare and hs_rqst */
+	dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
+
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+	temp = 85 * coeff + 6 * ui;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	temp = 40 * coeff + 4 * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
+
+	tmax = 255;
+	temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
+	temp = 145 * coeff + 10 * ui - temp;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
+
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	temp = 60 * coeff + 4 * ui;
+	tmin = DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+	tmax = 255;
+	tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
+
+	tmax = 63;
+	temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
+	temp = 60 * coeff + 52 * ui - 24 * ui - temp;
+	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+	timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0,
+						       false);
+	tmax = 63;
+	temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+	temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
+	temp += 8 * ui + lpx;
+	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+	if (tmin > tmax) {
+		temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre = temp >> 1;
+		timing->shared_timings.clk_pre_inc_by_2 = true;
+	} else {
+		timing->shared_timings.clk_pre =
+				linear_inter(tmax, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre_inc_by_2 = false;
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+		timing->hs_rqst);
+
+	return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
+				struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x8, lpx;
+	s32 tmax, tmin;
+	s32 pcnt0 = 50;
+	s32 pcnt1 = 50;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = 30;
+	s32 pcnt4 = 10;
+	s32 pcnt5 = 2;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 hb_en, hb_en_ckln, pd_ckln, pd;
+	s32 val, val_ckln;
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	timing->hs_halfbyte_en = 0;
+	hb_en = 0;
+	timing->hs_halfbyte_en_ckln = 0;
+	hb_en_ckln = 0;
+	timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
+	pd_ckln = timing->hs_prep_dly_ckln;
+	timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
+	pd = timing->hs_prep_dly;
+
+	val = (hb_en << 2) + (pd << 1);
+	val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x8 = ui << 3;
+	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+	temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff - val_ckln * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+	temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
+	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+	tmax = (tmin > 255) ? 511 : 255;
+	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+	temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
+	tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
+	tmax = 255;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+	temp = 60 * coeff + 52 * ui - 43 * ui;
+	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	timing->shared_timings.clk_post =
+				linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
+	temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
+	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+				(((timing->hs_rqst_ckln << 3) + 8) * ui);
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	if (tmin > tmax) {
+		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre = temp >> 1;
+		timing->shared_timings.clk_pre_inc_by_2 = 1;
+	} else {
+		timing->shared_timings.clk_pre =
+				linear_inter(tmax, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre_inc_by_2 = 0;
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+	    timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+	    timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+	    timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+	    timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+	    timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+	    timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+	    timing->hs_prep_dly_ckln);
+
+	return 0;
+}
+
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+	struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x8, lpx;
+	s32 tmax, tmin;
+	s32 pcnt0 = 50;
+	s32 pcnt1 = 50;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = 30;
+	s32 pcnt4 = 10;
+	s32 pcnt5 = 2;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 hb_en, hb_en_ckln;
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	timing->hs_halfbyte_en = 0;
+	hb_en = 0;
+	timing->hs_halfbyte_en_ckln = 0;
+	hb_en_ckln = 0;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x8 = ui << 3;
+	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+	temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = (tmin > 255) ? 511 : 255;
+	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (85 * coeff + 6 * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+	temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp / ui_x8) - 1;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+	temp = 60 * coeff + 52 * ui - 43 * ui;
+	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	timing->shared_timings.clk_post =
+		linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 8 * ui + (timing->clk_prepare << 3) * ui;
+	temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
+	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+		(((timing->hs_rqst_ckln << 3) + 8) * ui);
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	if (tmin > tmax) {
+		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre = temp >> 1;
+		timing->shared_timings.clk_pre_inc_by_2 = 1;
+	} else {
+		timing->shared_timings.clk_pre =
+			linear_inter(tmax, tmin, pcnt2, 0, false);
+			timing->shared_timings.clk_pre_inc_by_2 = 0;
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+		timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+		timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+		timing->hs_prep_dly_ckln);
+
+	return 0;
+}
+
+void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
+				u32 bit_mask)
+{
+	int phy_id = phy->id;
+	u32 val;
+
+	if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
+		return;
+
+	val = dsi_phy_read(phy->base + reg);
+
+	if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
+		dsi_phy_write(phy->base + reg, val | bit_mask);
+	else
+		dsi_phy_write(phy->base + reg, val & (~bit_mask));
+}
+
+static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	struct device *dev = &phy->pdev->dev;
+	int num = phy->cfg->reg_cfg.num;
+	int i, ret;
+
+	for (i = 0; i < num; i++)
+		s[i].supply = regs[i].name;
+
+	ret = devm_regulator_bulk_get(dev, num, s);
+	if (ret < 0) {
+		dev_err(dev, "%s: failed to init regulator, ret=%d\n",
+						__func__, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	int num = phy->cfg->reg_cfg.num;
+	int i;
+
+	DBG("");
+	for (i = num - 1; i >= 0; i--)
+		if (regs[i].disable_load >= 0)
+			regulator_set_load(s[i].consumer, regs[i].disable_load);
+
+	regulator_bulk_disable(num, s);
+}
+
+static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	struct device *dev = &phy->pdev->dev;
+	int num = phy->cfg->reg_cfg.num;
+	int ret, i;
+
+	DBG("");
+	for (i = 0; i < num; i++) {
+		if (regs[i].enable_load >= 0) {
+			ret = regulator_set_load(s[i].consumer,
+							regs[i].enable_load);
+			if (ret < 0) {
+				dev_err(dev,
+					"regulator %d set op mode failed, %d\n",
+					i, ret);
+				goto fail;
+			}
+		}
+	}
+
+	ret = regulator_bulk_enable(num, s);
+	if (ret < 0) {
+		dev_err(dev, "regulator enable failed, %d\n", ret);
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	for (i--; i >= 0; i--)
+		regulator_set_load(s[i].consumer, regs[i].disable_load);
+	return ret;
+}
+
+static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
+{
+	struct device *dev = &phy->pdev->dev;
+	int ret;
+
+	pm_runtime_get_sync(dev);
+
+	ret = clk_prepare_enable(phy->ahb_clk);
+	if (ret) {
+		dev_err(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
+		pm_runtime_put_sync(dev);
+	}
+
+	return ret;
+}
+
+static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
+{
+	clk_disable_unprepare(phy->ahb_clk);
+	pm_runtime_put_autosuspend(&phy->pdev->dev);
+}
+
+static const struct of_device_id dsi_phy_dt_match[] = {
+#ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
+	{ .compatible = "qcom,dsi-phy-28nm-hpm",
+	  .data = &dsi_phy_28nm_hpm_cfgs },
+	{ .compatible = "qcom,dsi-phy-28nm-lp",
+	  .data = &dsi_phy_28nm_lp_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
+	{ .compatible = "qcom,dsi-phy-20nm",
+	  .data = &dsi_phy_20nm_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
+	{ .compatible = "qcom,dsi-phy-28nm-8960",
+	  .data = &dsi_phy_28nm_8960_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
+	{ .compatible = "qcom,dsi-phy-14nm",
+	  .data = &dsi_phy_14nm_cfgs },
+#endif
+#ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
+	{ .compatible = "qcom,dsi-phy-10nm",
+	  .data = &dsi_phy_10nm_cfgs },
+#endif
+	{}
+};
+
+/*
+ * Currently, we only support one SoC for each PHY type. When we have multiple
+ * SoCs for the same PHY, we can try to make the index searching a bit more
+ * clever.
+ */
+static int dsi_phy_get_id(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+	const struct msm_dsi_phy_cfg *cfg = phy->cfg;
+	struct resource *res;
+	int i;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
+	if (!res)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->num_dsi_phy; i++) {
+		if (cfg->io_start[i] == res->start)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+int msm_dsi_phy_init_common(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+	int ret = 0;
+
+	phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
+				"DSI_PHY_REG");
+	if (IS_ERR(phy->reg_base)) {
+		dev_err(&pdev->dev, "%s: failed to map phy regulator base\n",
+			__func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+fail:
+	return ret;
+}
+
+static int dsi_phy_driver_probe(struct platform_device *pdev)
+{
+	struct msm_dsi_phy *phy;
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	match = of_match_node(dsi_phy_dt_match, dev->of_node);
+	if (!match)
+		return -ENODEV;
+
+	phy->cfg = match->data;
+	phy->pdev = pdev;
+
+	phy->id = dsi_phy_get_id(phy);
+	if (phy->id < 0) {
+		ret = phy->id;
+		dev_err(dev, "%s: couldn't identify PHY index, %d\n",
+			__func__, ret);
+		goto fail;
+	}
+
+	phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
+				"qcom,dsi-phy-regulator-ldo-mode");
+
+	phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+	if (IS_ERR(phy->base)) {
+		dev_err(dev, "%s: failed to map phy base\n", __func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	ret = dsi_phy_regulator_init(phy);
+	if (ret) {
+		dev_err(dev, "%s: failed to init regulator\n", __func__);
+		goto fail;
+	}
+
+	phy->ahb_clk = msm_clk_get(pdev, "iface");
+	if (IS_ERR(phy->ahb_clk)) {
+		dev_err(dev, "%s: Unable to get ahb clk\n", __func__);
+		ret = PTR_ERR(phy->ahb_clk);
+		goto fail;
+	}
+
+	if (phy->cfg->ops.init) {
+		ret = phy->cfg->ops.init(phy);
+		if (ret)
+			goto fail;
+	}
+
+	/* PLL init will call into clk_register which requires
+	 * register access, so we need to enable power and ahb clock.
+	 */
+	ret = dsi_phy_enable_resource(phy);
+	if (ret)
+		goto fail;
+
+	phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
+	if (IS_ERR_OR_NULL(phy->pll))
+		dev_info(dev,
+			"%s: pll init failed: %ld, need separate pll clk driver\n",
+			__func__, PTR_ERR(phy->pll));
+
+	dsi_phy_disable_resource(phy);
+
+	platform_set_drvdata(pdev, phy);
+
+	return 0;
+
+fail:
+	return ret;
+}
+
+static int dsi_phy_driver_remove(struct platform_device *pdev)
+{
+	struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
+
+	if (phy && phy->pll) {
+		msm_dsi_pll_destroy(phy->pll);
+		phy->pll = NULL;
+	}
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver dsi_phy_platform_driver = {
+	.probe      = dsi_phy_driver_probe,
+	.remove     = dsi_phy_driver_remove,
+	.driver     = {
+		.name   = "msm_dsi_phy",
+		.of_match_table = dsi_phy_dt_match,
+	},
+};
+
+void __init msm_dsi_phy_driver_register(void)
+{
+	platform_driver_register(&dsi_phy_platform_driver);
+}
+
+void __exit msm_dsi_phy_driver_unregister(void)
+{
+	platform_driver_unregister(&dsi_phy_platform_driver);
+}
+
+int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+			struct msm_dsi_phy_clk_request *clk_req)
+{
+	struct device *dev;
+	int ret;
+
+	if (!phy || !phy->cfg->ops.enable)
+		return -EINVAL;
+
+	dev = &phy->pdev->dev;
+
+	ret = dsi_phy_enable_resource(phy);
+	if (ret) {
+		dev_err(dev, "%s: resource enable failed, %d\n",
+			__func__, ret);
+		goto res_en_fail;
+	}
+
+	ret = dsi_phy_regulator_enable(phy);
+	if (ret) {
+		dev_err(dev, "%s: regulator enable failed, %d\n",
+			__func__, ret);
+		goto reg_en_fail;
+	}
+
+	ret = phy->cfg->ops.enable(phy, src_pll_id, clk_req);
+	if (ret) {
+		dev_err(dev, "%s: phy enable failed, %d\n", __func__, ret);
+		goto phy_en_fail;
+	}
+
+	/*
+	 * Resetting DSI PHY silently changes its PLL registers to reset status,
+	 * which will confuse clock driver and result in wrong output rate of
+	 * link clocks. Restore PLL status if its PLL is being used as clock
+	 * source.
+	 */
+	if (phy->usecase != MSM_DSI_PHY_SLAVE) {
+		ret = msm_dsi_pll_restore_state(phy->pll);
+		if (ret) {
+			dev_err(dev, "%s: failed to restore pll state, %d\n",
+				__func__, ret);
+			goto pll_restor_fail;
+		}
+	}
+
+	return 0;
+
+pll_restor_fail:
+	if (phy->cfg->ops.disable)
+		phy->cfg->ops.disable(phy);
+phy_en_fail:
+	dsi_phy_regulator_disable(phy);
+reg_en_fail:
+	dsi_phy_disable_resource(phy);
+res_en_fail:
+	return ret;
+}
+
+void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
+{
+	if (!phy || !phy->cfg->ops.disable)
+		return;
+
+	phy->cfg->ops.disable(phy);
+
+	dsi_phy_regulator_disable(phy);
+	dsi_phy_disable_resource(phy);
+}
+
+void msm_dsi_phy_get_shared_timings(struct msm_dsi_phy *phy,
+			struct msm_dsi_phy_shared_timings *shared_timings)
+{
+	memcpy(shared_timings, &phy->timing.shared_timings,
+	       sizeof(*shared_timings));
+}
+
+struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
+{
+	if (!phy)
+		return NULL;
+
+	return phy->pll;
+}
+
+void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
+			     enum msm_dsi_phy_usecase uc)
+{
+	if (phy)
+		phy->usecase = uc;
+}
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
new file mode 100644
index 000000000..a24ab8099
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DSI_PHY_H__
+#define __DSI_PHY_H__
+
+#include <linux/regulator/consumer.h>
+
+#include "dsi.h"
+
+#define dsi_phy_read(offset) msm_readl((offset))
+#define dsi_phy_write(offset, data) msm_writel((data), (offset))
+
+struct msm_dsi_phy_ops {
+	int (*init) (struct msm_dsi_phy *phy);
+	int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
+			struct msm_dsi_phy_clk_request *clk_req);
+	void (*disable)(struct msm_dsi_phy *phy);
+};
+
+struct msm_dsi_phy_cfg {
+	enum msm_dsi_phy_type type;
+	struct dsi_reg_config reg_cfg;
+	struct msm_dsi_phy_ops ops;
+
+	/*
+	 * Each cell {phy_id, pll_id} of the truth table indicates
+	 * if the source PLL selection bit should be set for each PHY.
+	 * Fill default H/W values in illegal cells, eg. cell {0, 1}.
+	 */
+	bool src_pll_truthtable[DSI_MAX][DSI_MAX];
+	const resource_size_t io_start[DSI_MAX];
+	const int num_dsi_phy;
+};
+
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
+
+struct msm_dsi_dphy_timing {
+	u32 clk_pre;
+	u32 clk_post;
+	u32 clk_zero;
+	u32 clk_trail;
+	u32 clk_prepare;
+	u32 hs_exit;
+	u32 hs_zero;
+	u32 hs_prepare;
+	u32 hs_trail;
+	u32 hs_rqst;
+	u32 ta_go;
+	u32 ta_sure;
+	u32 ta_get;
+
+	struct msm_dsi_phy_shared_timings shared_timings;
+
+	/* For PHY v2 only */
+	u32 hs_rqst_ckln;
+	u32 hs_prep_dly;
+	u32 hs_prep_dly_ckln;
+	u8 hs_halfbyte_en;
+	u8 hs_halfbyte_en_ckln;
+};
+
+struct msm_dsi_phy {
+	struct platform_device *pdev;
+	void __iomem *base;
+	void __iomem *reg_base;
+	void __iomem *lane_base;
+	int id;
+
+	struct clk *ahb_clk;
+	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
+
+	struct msm_dsi_dphy_timing timing;
+	const struct msm_dsi_phy_cfg *cfg;
+
+	enum msm_dsi_phy_usecase usecase;
+	bool regulator_ldo_mode;
+
+	struct msm_dsi_pll *pll;
+};
+
+/*
+ * PHY internal functions
+ */
+int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
+			     struct msm_dsi_phy_clk_request *clk_req);
+int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
+				struct msm_dsi_phy_clk_request *clk_req);
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+				struct msm_dsi_phy_clk_request *clk_req);
+void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
+				u32 bit_mask);
+int msm_dsi_phy_init_common(struct msm_dsi_phy *phy);
+
+#endif /* __DSI_PHY_H__ */
+
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
new file mode 100644
index 000000000..b3fffc8db
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -0,0 +1,223 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0
+ * Copyright (c) 2018, The Linux Foundation
+ */
+
+#include <linux/iopoll.h>
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static int dsi_phy_hw_v3_0_is_pll_on(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->base;
+	u32 data = 0;
+
+	data = dsi_phy_read(base + REG_DSI_10nm_PHY_CMN_PLL_CNTRL);
+	mb(); /* make sure read happened */
+
+	return (data & BIT(0));
+}
+
+static void dsi_phy_hw_v3_0_config_lpcdrx(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *lane_base = phy->lane_base;
+	int phy_lane_0 = 0;	/* TODO: Support all lane swap configs */
+
+	/*
+	 * LPRX and CDRX need to enabled only for physical data lane
+	 * corresponding to the logical data lane 0
+	 */
+	if (enable)
+		dsi_phy_write(lane_base +
+			      REG_DSI_10nm_PHY_LN_LPRX_CTRL(phy_lane_0), 0x3);
+	else
+		dsi_phy_write(lane_base +
+			      REG_DSI_10nm_PHY_LN_LPRX_CTRL(phy_lane_0), 0);
+}
+
+static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy)
+{
+	int i;
+	u8 tx_dctrl[] = { 0x00, 0x00, 0x00, 0x04, 0x01 };
+	void __iomem *lane_base = phy->lane_base;
+
+	/* Strength ctrl settings */
+	for (i = 0; i < 5; i++) {
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_LPTX_STR_CTRL(i),
+			      0x55);
+		/*
+		 * Disable LPRX and CDRX for all lanes. And later on, it will
+		 * be only enabled for the physical data lane corresponding
+		 * to the logical data lane 0
+		 */
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_LPRX_CTRL(i), 0);
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_PIN_SWAP(i), 0x0);
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_HSTX_STR_CTRL(i),
+			      0x88);
+	}
+
+	dsi_phy_hw_v3_0_config_lpcdrx(phy, true);
+
+	/* other settings */
+	for (i = 0; i < 5; i++) {
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG0(i), 0x0);
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG1(i), 0x0);
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG2(i), 0x0);
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG3(i),
+			      i == 4 ? 0x80 : 0x0);
+		dsi_phy_write(lane_base +
+			      REG_DSI_10nm_PHY_LN_OFFSET_TOP_CTRL(i), 0x0);
+		dsi_phy_write(lane_base +
+			      REG_DSI_10nm_PHY_LN_OFFSET_BOT_CTRL(i), 0x0);
+		dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(i),
+			      tx_dctrl[i]);
+	}
+
+	/* Toggle BIT 0 to release freeze I/0 */
+	dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x05);
+	dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04);
+}
+
+static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+			       struct msm_dsi_phy_clk_request *clk_req)
+{
+	int ret;
+	u32 status;
+	u32 const delay_us = 5;
+	u32 const timeout_us = 1000;
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	void __iomem *base = phy->base;
+	u32 data;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc_v3(timing, clk_req)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	if (dsi_phy_hw_v3_0_is_pll_on(phy))
+		pr_warn("PLL turned on before configuring PHY\n");
+
+	/* wait for REFGEN READY */
+	ret = readl_poll_timeout_atomic(base + REG_DSI_10nm_PHY_CMN_PHY_STATUS,
+					status, (status & BIT(0)),
+					delay_us, timeout_us);
+	if (ret) {
+		pr_err("Ref gen not ready. Aborting\n");
+		return -EINVAL;
+	}
+
+	/* de-assert digital and pll power down */
+	data = BIT(6) | BIT(5);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, data);
+
+	/* Assert PLL core reset */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0x00);
+
+	/* turn off resync FIFO */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x00);
+
+	/* Select MS1 byte-clk */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_GLBL_CTRL, 0x10);
+
+	/* Enable LDO */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_VREG_CTRL, 0x59);
+
+	/* Configure PHY lane swap (TODO: we need to calculate this) */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CFG0, 0x21);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CFG1, 0x84);
+
+	/* DSI PHY timings */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_0,
+		      timing->hs_halfbyte_en);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_1,
+		      timing->clk_zero);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_2,
+		      timing->clk_prepare);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_3,
+		      timing->clk_trail);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_4,
+		      timing->hs_exit);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_5,
+		      timing->hs_zero);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_6,
+		      timing->hs_prepare);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_7,
+		      timing->hs_trail);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_8,
+		      timing->hs_rqst);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_9,
+		      timing->ta_go | (timing->ta_sure << 3));
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_10,
+		      timing->ta_get);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_11,
+		      0x00);
+
+	/* Remove power down from all blocks */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, 0x7f);
+
+	/* power up lanes */
+	data = dsi_phy_read(base + REG_DSI_10nm_PHY_CMN_CTRL_0);
+
+	/* TODO: only power up lanes that are used */
+	data |= 0x1F;
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, data);
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CTRL0, 0x1F);
+
+	/* Select full-rate mode */
+	dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_2, 0x40);
+
+	ret = msm_dsi_pll_set_usecase(phy->pll, phy->usecase);
+	if (ret) {
+		dev_err(&phy->pdev->dev, "%s: set pll usecase failed, %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* DSI lane settings */
+	dsi_phy_hw_v3_0_lane_settings(phy);
+
+	DBG("DSI%d PHY enabled", phy->id);
+
+	return 0;
+}
+
+static void dsi_10nm_phy_disable(struct msm_dsi_phy *phy)
+{
+}
+
+static int dsi_10nm_phy_init(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+
+	phy->lane_base = msm_ioremap(pdev, "dsi_phy_lane",
+				     "DSI_PHY_LANE");
+	if (IS_ERR(phy->lane_base)) {
+		dev_err(&pdev->dev, "%s: failed to map phy lane base\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = {
+	.type = MSM_DSI_PHY_10NM,
+	.src_pll_truthtable = { {false, false}, {true, false} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vdds", 36000, 32},
+		},
+	},
+	.ops = {
+		.enable = dsi_10nm_phy_enable,
+		.disable = dsi_10nm_phy_disable,
+		.init = dsi_10nm_phy_init,
+	},
+	.io_start = { 0xae94400, 0xae96400 },
+	.num_dsi_phy = 2,
+};
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
new file mode 100644
index 000000000..513f4234a
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+#define PHY_14NM_CKLN_IDX	4
+
+static void dsi_14nm_dphy_set_timing(struct msm_dsi_phy *phy,
+				     struct msm_dsi_dphy_timing *timing,
+				     int lane_idx)
+{
+	void __iomem *base = phy->lane_base;
+	bool clk_ln = (lane_idx == PHY_14NM_CKLN_IDX);
+	u32 zero = clk_ln ? timing->clk_zero : timing->hs_zero;
+	u32 prepare = clk_ln ? timing->clk_prepare : timing->hs_prepare;
+	u32 trail = clk_ln ? timing->clk_trail : timing->hs_trail;
+	u32 rqst = clk_ln ? timing->hs_rqst_ckln : timing->hs_rqst;
+	u32 prep_dly = clk_ln ? timing->hs_prep_dly_ckln : timing->hs_prep_dly;
+	u32 halfbyte_en = clk_ln ? timing->hs_halfbyte_en_ckln :
+				   timing->hs_halfbyte_en;
+
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_4(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_5(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_5_HS_ZERO(zero));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_6(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_6_HS_PREPARE(prepare));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_7(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_7_HS_TRAIL(trail));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_8(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_8_HS_RQST(rqst));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_CFG0(lane_idx),
+		      DSI_14nm_PHY_LN_CFG0_PREPARE_DLY(prep_dly));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_CFG1(lane_idx),
+		      halfbyte_en ? DSI_14nm_PHY_LN_CFG1_HALFBYTECLK_EN : 0);
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_9(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		      DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_10(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_11(lane_idx),
+		      DSI_14nm_PHY_LN_TIMING_CTRL_11_TRIG3_CMD(0xa0));
+}
+
+static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+			       struct msm_dsi_phy_clk_request *clk_req)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	u32 data;
+	int i;
+	int ret;
+	void __iomem *base = phy->base;
+	void __iomem *lane_base = phy->lane_base;
+
+	if (msm_dsi_dphy_timing_calc_v2(timing, clk_req)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	data = 0x1c;
+	if (phy->usecase != MSM_DSI_PHY_STANDALONE)
+		data |= DSI_14nm_PHY_CMN_LDO_CNTRL_VREG_CTRL(32);
+	dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
+
+	dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL, 0x1);
+
+	/* 4 data lanes + 1 clk lane configuration */
+	for (i = 0; i < 5; i++) {
+		dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_VREG_CNTRL(i),
+			      0x1d);
+
+		dsi_phy_write(lane_base +
+			      REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_0(i), 0xff);
+		dsi_phy_write(lane_base +
+			      REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_1(i),
+			      (i == PHY_14NM_CKLN_IDX) ? 0x00 : 0x06);
+
+		dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_CFG3(i),
+			      (i == PHY_14NM_CKLN_IDX) ? 0x8f : 0x0f);
+		dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_CFG2(i), 0x10);
+		dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_TEST_DATAPATH(i),
+			      0);
+		dsi_phy_write(lane_base + REG_DSI_14nm_PHY_LN_TEST_STR(i),
+			      0x88);
+
+		dsi_14nm_dphy_set_timing(phy, timing, i);
+	}
+
+	/* Make sure PLL is not start */
+	dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0x00);
+
+	wmb(); /* make sure everything is written before reset and enable */
+
+	/* reset digital block */
+	dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x80);
+	wmb(); /* ensure reset is asserted */
+	udelay(100);
+	dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x00);
+
+	msm_dsi_phy_set_src_pll(phy, src_pll_id,
+				REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL,
+				DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+	ret = msm_dsi_pll_set_usecase(phy->pll, phy->usecase);
+	if (ret) {
+		dev_err(&phy->pdev->dev, "%s: set pll usecase failed, %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	/* Remove power down from PLL and all lanes */
+	dsi_phy_write(base + REG_DSI_14nm_PHY_CMN_CTRL_0, 0xff);
+
+	return 0;
+}
+
+static void dsi_14nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL, 0);
+	dsi_phy_write(phy->base + REG_DSI_14nm_PHY_CMN_CTRL_0, 0);
+
+	/* ensure that the phy is completely disabled */
+	wmb();
+}
+
+static int dsi_14nm_phy_init(struct msm_dsi_phy *phy)
+{
+	struct platform_device *pdev = phy->pdev;
+
+	phy->lane_base = msm_ioremap(pdev, "dsi_phy_lane",
+				"DSI_PHY_LANE");
+	if (IS_ERR(phy->lane_base)) {
+		dev_err(&pdev->dev, "%s: failed to map phy lane base\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
+	.type = MSM_DSI_PHY_14NM,
+	.src_pll_truthtable = { {false, false}, {true, false} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vcca", 17000, 32},
+		},
+	},
+	.ops = {
+		.enable = dsi_14nm_phy_enable,
+		.disable = dsi_14nm_phy_disable,
+		.init = dsi_14nm_phy_init,
+	},
+	.io_start = { 0x994400, 0x996400 },
+	.num_dsi_phy = 2,
+};
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
new file mode 100644
index 000000000..4c037d855
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_20nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_0,
+		DSI_20nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_1,
+		DSI_20nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_2,
+		DSI_20nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	if (timing->clk_zero & BIT(8))
+		dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_3,
+			DSI_20nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_4,
+		DSI_20nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_5,
+		DSI_20nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_6,
+		DSI_20nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_7,
+		DSI_20nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_8,
+		DSI_20nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_9,
+		DSI_20nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_20nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_10,
+		DSI_20nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_11,
+		DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *base = phy->reg_base;
+
+	if (!enable) {
+		dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+		return;
+	}
+
+	if (phy->regulator_ldo_mode) {
+		dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x1d);
+		return;
+	}
+
+	/* non LDO mode */
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_1, 0x03);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_2, 0x03);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_3, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_4, 0x20);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0x01);
+	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
+}
+
+static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+				struct msm_dsi_phy_clk_request *clk_req)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	int i;
+	void __iomem *base = phy->base;
+	u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, clk_req)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_20nm_phy_regulator_ctrl(phy, true);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
+
+	msm_dsi_phy_set_src_pll(phy, src_pll_id,
+				REG_DSI_20nm_PHY_GLBL_TEST_CTRL,
+				DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_3(i),
+							(i >> 1) * 0x40);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_0(i), 0x01);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_1(i), 0x46);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_0(i), 0x02);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_1(i), 0xa0);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_4(i), cfg_4[i]);
+	}
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_3, 0x80);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR0, 0x01);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR1, 0x46);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_0, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_1, 0xa0);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_2, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_4, 0x00);
+
+	dsi_20nm_dphy_set_timing(phy, timing);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_1, 0x00);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_1, 0x06);
+
+	/* make sure everything is written before enable */
+	wmb();
+	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_0, 0x7f);
+
+	return 0;
+}
+
+static void dsi_20nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_CTRL_0, 0);
+	dsi_20nm_phy_regulator_ctrl(phy, false);
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
+	.type = MSM_DSI_PHY_20NM,
+	.src_pll_truthtable = { {false, true}, {false, true} },
+	.reg_cfg = {
+		.num = 2,
+		.regs = {
+			{"vddio", 100000, 100},	/* 1.8 V */
+			{"vcca", 10000, 100},	/* 1.0 V */
+		},
+	},
+	.ops = {
+		.enable = dsi_20nm_phy_enable,
+		.disable = dsi_20nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
+	},
+	.io_start = { 0xfd998500, 0xfd9a0500 },
+	.num_dsi_phy = 2,
+};
+
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
new file mode 100644
index 000000000..4972b52cb
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
+		DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
+		DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
+		DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	if (timing->clk_zero & BIT(8))
+		dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
+			DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
+		DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
+		DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
+		DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
+		DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
+		DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
+		DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
+		DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
+		DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *base = phy->reg_base;
+
+	if (!enable) {
+		dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+		return;
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+				struct msm_dsi_phy_clk_request *clk_req)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	int i;
+	void __iomem *base = phy->base;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, clk_req)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
+
+	dsi_28nm_phy_regulator_ctrl(phy, true);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
+
+	dsi_28nm_dphy_set_timing(phy, timing);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_4, 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+	msm_dsi_phy_set_src_pll(phy, src_pll_id,
+				REG_DSI_28nm_PHY_GLBL_TEST_CTRL,
+				DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+	return 0;
+}
+
+static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
+	dsi_28nm_phy_regulator_ctrl(phy, false);
+
+	/*
+	 * Wait for the registers writes to complete in order to
+	 * ensure that the phy is completely disabled
+	 */
+	wmb();
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
+	.type = MSM_DSI_PHY_28NM_HPM,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
+	},
+	.io_start = { 0xfd922b00, 0xfd923100 },
+	.num_dsi_phy = 2,
+};
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
+	.type = MSM_DSI_PHY_28NM_LP,
+	.src_pll_truthtable = { {true, true}, {true, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 100000, 100},	/* 1.8 V */
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
+	},
+	.io_start = { 0x1a98500 },
+	.num_dsi_phy = 1,
+};
+
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
new file mode 100644
index 000000000..398004463
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_0,
+		DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_1,
+		DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_2,
+		DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_4,
+		DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_5,
+		DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_6,
+		DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_7,
+		DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_8,
+		DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_9,
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_10,
+		DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_11,
+		DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_28nm_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4,
+		0x100);
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1, 0xa);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2, 0x4);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4, 0x20);
+}
+
+static void dsi_28nm_phy_calibration(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->reg_base;
+	u32 status;
+	int i = 5000;
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CAL_PWR_CFG,
+			0x3);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_1, 0x5a);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_3, 0x10);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_4, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_0, 0x1);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x1);
+	usleep_range(5000, 6000);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER, 0x0);
+
+	do {
+		status = dsi_phy_read(base +
+				REG_DSI_28nm_8960_PHY_MISC_CAL_STATUS);
+
+		if (!(status & DSI_28nm_8960_PHY_MISC_CAL_STATUS_CAL_BUSY))
+			break;
+
+		udelay(1);
+	} while (--i > 0);
+}
+
+static void dsi_28nm_phy_lane_config(struct msm_dsi_phy *phy)
+{
+	void __iomem *base = phy->base;
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_0(i), 0x80);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_1(i), 0x45);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_CFG_2(i), 0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_DATAPATH(i),
+			0x00);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_0(i),
+			0x01);
+		dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_1(i),
+			0x66);
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_0, 0x40);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_1, 0x67);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_CFG_2, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_DATAPATH, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR0, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1, 0x88);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+				struct msm_dsi_phy_clk_request *clk_req)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	void __iomem *base = phy->base;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, clk_req)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_28nm_phy_regulator_init(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_LDO_CTRL, 0x04);
+
+	/* strength control */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_0, 0xff);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_STRENGTH_2, 0x06);
+
+	/* phy ctrl */
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x5f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_2, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_CTRL_3, 0x10);
+
+	dsi_28nm_phy_regulator_ctrl(phy);
+
+	dsi_28nm_phy_calibration(phy);
+
+	dsi_28nm_phy_lane_config(phy);
+
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0f);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_1, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_0, 0x03);
+	dsi_phy_write(base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4, 0x0);
+
+	dsi_28nm_dphy_set_timing(phy, timing);
+
+	return 0;
+}
+
+static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_28nm_8960_PHY_CTRL_0, 0x0);
+
+	/*
+	 * Wait for the registers writes to complete in order to
+	 * ensure that the phy is completely disabled
+	 */
+	wmb();
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
+	.type = MSM_DSI_PHY_28NM_8960,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 100000, 100},	/* 1.8 V */
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+		.init = msm_dsi_phy_init_common,
+	},
+	.io_start = { 0x4700300, 0x5800300 },
+	.num_dsi_phy = 2,
+};