Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 859 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
new file mode 100644
index 000000000..2d6506c08
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -0,0 +1,859 @@
+/*
+ * Copyright © 2007 David Airlie
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *     David Airlie
+ */
+
+#include <linux/async.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/vga_switcheroo.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_helper.h>
+#include "intel_drv.h"
+#include "intel_frontbuffer.h"
+#include <drm/i915_drm.h>
+#include "i915_drv.h"
+
+static void intel_fbdev_invalidate(struct intel_fbdev *ifbdev)
+{
+	struct drm_i915_gem_object *obj = intel_fb_obj(&ifbdev->fb->base);
+	unsigned int origin =
+		ifbdev->vma_flags & PLANE_HAS_FENCE ? ORIGIN_GTT : ORIGIN_CPU;
+
+	intel_fb_obj_invalidate(obj, origin);
+}
+
+static int intel_fbdev_set_par(struct fb_info *info)
+{
+	struct drm_fb_helper *fb_helper = info->par;
+	struct intel_fbdev *ifbdev =
+		container_of(fb_helper, struct intel_fbdev, helper);
+	int ret;
+
+	ret = drm_fb_helper_set_par(info);
+	if (ret == 0)
+		intel_fbdev_invalidate(ifbdev);
+
+	return ret;
+}
+
+static int intel_fbdev_blank(int blank, struct fb_info *info)
+{
+	struct drm_fb_helper *fb_helper = info->par;
+	struct intel_fbdev *ifbdev =
+		container_of(fb_helper, struct intel_fbdev, helper);
+	int ret;
+
+	ret = drm_fb_helper_blank(blank, info);
+	if (ret == 0)
+		intel_fbdev_invalidate(ifbdev);
+
+	return ret;
+}
+
+static int intel_fbdev_pan_display(struct fb_var_screeninfo *var,
+				   struct fb_info *info)
+{
+	struct drm_fb_helper *fb_helper = info->par;
+	struct intel_fbdev *ifbdev =
+		container_of(fb_helper, struct intel_fbdev, helper);
+	int ret;
+
+	ret = drm_fb_helper_pan_display(var, info);
+	if (ret == 0)
+		intel_fbdev_invalidate(ifbdev);
+
+	return ret;
+}
+
+static struct fb_ops intelfb_ops = {
+	.owner = THIS_MODULE,
+	DRM_FB_HELPER_DEFAULT_OPS,
+	.fb_set_par = intel_fbdev_set_par,
+	.fb_fillrect = drm_fb_helper_cfb_fillrect,
+	.fb_copyarea = drm_fb_helper_cfb_copyarea,
+	.fb_imageblit = drm_fb_helper_cfb_imageblit,
+	.fb_pan_display = intel_fbdev_pan_display,
+	.fb_blank = intel_fbdev_blank,
+};
+
+static int intelfb_alloc(struct drm_fb_helper *helper,
+			 struct drm_fb_helper_surface_size *sizes)
+{
+	struct intel_fbdev *ifbdev =
+		container_of(helper, struct intel_fbdev, helper);
+	struct drm_framebuffer *fb;
+	struct drm_device *dev = helper->dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_mode_fb_cmd2 mode_cmd = {};
+	struct drm_i915_gem_object *obj;
+	int size, ret;
+
+	/* we don't do packed 24bpp */
+	if (sizes->surface_bpp == 24)
+		sizes->surface_bpp = 32;
+
+	mode_cmd.width = sizes->surface_width;
+	mode_cmd.height = sizes->surface_height;
+
+	mode_cmd.pitches[0] = ALIGN(mode_cmd.width *
+				    DIV_ROUND_UP(sizes->surface_bpp, 8), 64);
+	mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
+							  sizes->surface_depth);
+
+	size = mode_cmd.pitches[0] * mode_cmd.height;
+	size = PAGE_ALIGN(size);
+
+	/* If the FB is too big, just don't use it since fbdev is not very
+	 * important and we should probably use that space with FBC or other
+	 * features. */
+	obj = NULL;
+	if (size * 2 < dev_priv->stolen_usable_size)
+		obj = i915_gem_object_create_stolen(dev_priv, size);
+	if (obj == NULL)
+		obj = i915_gem_object_create(dev_priv, size);
+	if (IS_ERR(obj)) {
+		DRM_ERROR("failed to allocate framebuffer\n");
+		ret = PTR_ERR(obj);
+		goto err;
+	}
+
+	fb = intel_framebuffer_create(obj, &mode_cmd);
+	if (IS_ERR(fb)) {
+		ret = PTR_ERR(fb);
+		goto err_obj;
+	}
+
+	ifbdev->fb = to_intel_framebuffer(fb);
+
+	return 0;
+
+err_obj:
+	i915_gem_object_put(obj);
+err:
+	return ret;
+}
+
+static int intelfb_create(struct drm_fb_helper *helper,
+			  struct drm_fb_helper_surface_size *sizes)
+{
+	struct intel_fbdev *ifbdev =
+		container_of(helper, struct intel_fbdev, helper);
+	struct intel_framebuffer *intel_fb = ifbdev->fb;
+	struct drm_device *dev = helper->dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct pci_dev *pdev = dev_priv->drm.pdev;
+	struct i915_ggtt *ggtt = &dev_priv->ggtt;
+	struct fb_info *info;
+	struct drm_framebuffer *fb;
+	struct i915_vma *vma;
+	unsigned long flags = 0;
+	bool prealloc = false;
+	void __iomem *vaddr;
+	int ret;
+
+	if (intel_fb &&
+	    (sizes->fb_width > intel_fb->base.width ||
+	     sizes->fb_height > intel_fb->base.height)) {
+		DRM_DEBUG_KMS("BIOS fb too small (%dx%d), we require (%dx%d),"
+			      " releasing it\n",
+			      intel_fb->base.width, intel_fb->base.height,
+			      sizes->fb_width, sizes->fb_height);
+		drm_framebuffer_put(&intel_fb->base);
+		intel_fb = ifbdev->fb = NULL;
+	}
+	if (!intel_fb || WARN_ON(!intel_fb_obj(&intel_fb->base))) {
+		DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
+		ret = intelfb_alloc(helper, sizes);
+		if (ret)
+			return ret;
+		intel_fb = ifbdev->fb;
+	} else {
+		DRM_DEBUG_KMS("re-using BIOS fb\n");
+		prealloc = true;
+		sizes->fb_width = intel_fb->base.width;
+		sizes->fb_height = intel_fb->base.height;
+	}
+
+	mutex_lock(&dev->struct_mutex);
+	intel_runtime_pm_get(dev_priv);
+
+	/* Pin the GGTT vma for our access via info->screen_base.
+	 * This also validates that any existing fb inherited from the
+	 * BIOS is suitable for own access.
+	 */
+	vma = intel_pin_and_fence_fb_obj(&ifbdev->fb->base,
+					 DRM_MODE_ROTATE_0,
+					 false, &flags);
+	if (IS_ERR(vma)) {
+		ret = PTR_ERR(vma);
+		goto out_unlock;
+	}
+
+	fb = &ifbdev->fb->base;
+	intel_fb_obj_flush(intel_fb_obj(fb), ORIGIN_DIRTYFB);
+
+	info = drm_fb_helper_alloc_fbi(helper);
+	if (IS_ERR(info)) {
+		DRM_ERROR("Failed to allocate fb_info\n");
+		ret = PTR_ERR(info);
+		goto out_unpin;
+	}
+
+	info->par = helper;
+
+	ifbdev->helper.fb = fb;
+
+	strcpy(info->fix.id, "inteldrmfb");
+
+	info->fbops = &intelfb_ops;
+
+	/* setup aperture base/size for vesafb takeover */
+	info->apertures->ranges[0].base = dev->mode_config.fb_base;
+	info->apertures->ranges[0].size = ggtt->mappable_end;
+
+	info->fix.smem_start = dev->mode_config.fb_base + i915_ggtt_offset(vma);
+	info->fix.smem_len = vma->node.size;
+
+	vaddr = i915_vma_pin_iomap(vma);
+	if (IS_ERR(vaddr)) {
+		DRM_ERROR("Failed to remap framebuffer into virtual memory\n");
+		ret = PTR_ERR(vaddr);
+		goto out_unpin;
+	}
+	info->screen_base = vaddr;
+	info->screen_size = vma->node.size;
+
+	/* This driver doesn't need a VT switch to restore the mode on resume */
+	info->skip_vt_switch = true;
+
+	drm_fb_helper_fill_fix(info, fb->pitches[0], fb->format->depth);
+	drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height);
+
+	/* If the object is shmemfs backed, it will have given us zeroed pages.
+	 * If the object is stolen however, it will be full of whatever
+	 * garbage was left in there.
+	 */
+	if (intel_fb_obj(fb)->stolen && !prealloc)
+		memset_io(info->screen_base, 0, info->screen_size);
+
+	/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
+
+	DRM_DEBUG_KMS("allocated %dx%d fb: 0x%08x\n",
+		      fb->width, fb->height, i915_ggtt_offset(vma));
+	ifbdev->vma = vma;
+	ifbdev->vma_flags = flags;
+
+	intel_runtime_pm_put(dev_priv);
+	mutex_unlock(&dev->struct_mutex);
+	vga_switcheroo_client_fb_set(pdev, info);
+	return 0;
+
+out_unpin:
+	intel_unpin_fb_vma(vma, flags);
+out_unlock:
+	intel_runtime_pm_put(dev_priv);
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+static struct drm_fb_helper_crtc *
+intel_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
+{
+	int i;
+
+	for (i = 0; i < fb_helper->crtc_count; i++)
+		if (fb_helper->crtc_info[i].mode_set.crtc == crtc)
+			return &fb_helper->crtc_info[i];
+
+	return NULL;
+}
+
+/*
+ * Try to read the BIOS display configuration and use it for the initial
+ * fb configuration.
+ *
+ * The BIOS or boot loader will generally create an initial display
+ * configuration for us that includes some set of active pipes and displays.
+ * This routine tries to figure out which pipes and connectors are active
+ * and stuffs them into the crtcs and modes array given to us by the
+ * drm_fb_helper code.
+ *
+ * The overall sequence is:
+ *   intel_fbdev_init - from driver load
+ *     intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
+ *     drm_fb_helper_init - build fb helper structs
+ *     drm_fb_helper_single_add_all_connectors - more fb helper structs
+ *   intel_fbdev_initial_config - apply the config
+ *     drm_fb_helper_initial_config - call ->probe then register_framebuffer()
+ *         drm_setup_crtcs - build crtc config for fbdev
+ *           intel_fb_initial_config - find active connectors etc
+ *         drm_fb_helper_single_fb_probe - set up fbdev
+ *           intelfb_create - re-use or alloc fb, build out fbdev structs
+ *
+ * Note that we don't make special consideration whether we could actually
+ * switch to the selected modes without a full modeset. E.g. when the display
+ * is in VGA mode we need to recalculate watermarks and set a new high-res
+ * framebuffer anyway.
+ */
+static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
+				    struct drm_fb_helper_crtc **crtcs,
+				    struct drm_display_mode **modes,
+				    struct drm_fb_offset *offsets,
+				    bool *enabled, int width, int height)
+{
+	struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
+	unsigned long conn_configured, conn_seq, mask;
+	unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
+	int i, j;
+	bool *save_enabled;
+	bool fallback = true, ret = true;
+	int num_connectors_enabled = 0;
+	int num_connectors_detected = 0;
+	struct drm_modeset_acquire_ctx ctx;
+
+	save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
+	if (!save_enabled)
+		return false;
+
+	drm_modeset_acquire_init(&ctx, 0);
+
+	while (drm_modeset_lock_all_ctx(fb_helper->dev, &ctx) != 0)
+		drm_modeset_backoff(&ctx);
+
+	memcpy(save_enabled, enabled, count);
+	mask = GENMASK(count - 1, 0);
+	conn_configured = 0;
+retry:
+	conn_seq = conn_configured;
+	for (i = 0; i < count; i++) {
+		struct drm_fb_helper_connector *fb_conn;
+		struct drm_connector *connector;
+		struct drm_encoder *encoder;
+		struct drm_fb_helper_crtc *new_crtc;
+
+		fb_conn = fb_helper->connector_info[i];
+		connector = fb_conn->connector;
+
+		if (conn_configured & BIT(i))
+			continue;
+
+		if (conn_seq == 0 && !connector->has_tile)
+			continue;
+
+		if (connector->status == connector_status_connected)
+			num_connectors_detected++;
+
+		if (!enabled[i]) {
+			DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
+				      connector->name);
+			conn_configured |= BIT(i);
+			continue;
+		}
+
+		if (connector->force == DRM_FORCE_OFF) {
+			DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
+				      connector->name);
+			enabled[i] = false;
+			continue;
+		}
+
+		encoder = connector->state->best_encoder;
+		if (!encoder || WARN_ON(!connector->state->crtc)) {
+			if (connector->force > DRM_FORCE_OFF)
+				goto bail;
+
+			DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
+				      connector->name);
+			enabled[i] = false;
+			conn_configured |= BIT(i);
+			continue;
+		}
+
+		num_connectors_enabled++;
+
+		new_crtc = intel_fb_helper_crtc(fb_helper,
+						connector->state->crtc);
+
+		/*
+		 * Make sure we're not trying to drive multiple connectors
+		 * with a single CRTC, since our cloning support may not
+		 * match the BIOS.
+		 */
+		for (j = 0; j < count; j++) {
+			if (crtcs[j] == new_crtc) {
+				DRM_DEBUG_KMS("fallback: cloned configuration\n");
+				goto bail;
+			}
+		}
+
+		DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
+			      connector->name);
+
+		/* go for command line mode first */
+		modes[i] = drm_pick_cmdline_mode(fb_conn);
+
+		/* try for preferred next */
+		if (!modes[i]) {
+			DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
+				      connector->name, connector->has_tile);
+			modes[i] = drm_has_preferred_mode(fb_conn, width,
+							  height);
+		}
+
+		/* No preferred mode marked by the EDID? Are there any modes? */
+		if (!modes[i] && !list_empty(&connector->modes)) {
+			DRM_DEBUG_KMS("using first mode listed on connector %s\n",
+				      connector->name);
+			modes[i] = list_first_entry(&connector->modes,
+						    struct drm_display_mode,
+						    head);
+		}
+
+		/* last resort: use current mode */
+		if (!modes[i]) {
+			/*
+			 * IMPORTANT: We want to use the adjusted mode (i.e.
+			 * after the panel fitter upscaling) as the initial
+			 * config, not the input mode, which is what crtc->mode
+			 * usually contains. But since our current
+			 * code puts a mode derived from the post-pfit timings
+			 * into crtc->mode this works out correctly.
+			 *
+			 * This is crtc->mode and not crtc->state->mode for the
+			 * fastboot check to work correctly. crtc_state->mode has
+			 * I915_MODE_FLAG_INHERITED, which we clear to force check
+			 * state.
+			 */
+			DRM_DEBUG_KMS("looking for current mode on connector %s\n",
+				      connector->name);
+			modes[i] = &connector->state->crtc->mode;
+		}
+		crtcs[i] = new_crtc;
+
+		DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
+			      connector->name,
+			      connector->state->crtc->base.id,
+			      connector->state->crtc->name,
+			      modes[i]->hdisplay, modes[i]->vdisplay,
+			      modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" :"");
+
+		fallback = false;
+		conn_configured |= BIT(i);
+	}
+
+	if ((conn_configured & mask) != mask && conn_configured != conn_seq)
+		goto retry;
+
+	/*
+	 * If the BIOS didn't enable everything it could, fall back to have the
+	 * same user experiencing of lighting up as much as possible like the
+	 * fbdev helper library.
+	 */
+	if (num_connectors_enabled != num_connectors_detected &&
+	    num_connectors_enabled < INTEL_INFO(dev_priv)->num_pipes) {
+		DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
+		DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
+			      num_connectors_detected);
+		fallback = true;
+	}
+
+	if (fallback) {
+bail:
+		DRM_DEBUG_KMS("Not using firmware configuration\n");
+		memcpy(enabled, save_enabled, count);
+		ret = false;
+	}
+
+	drm_modeset_drop_locks(&ctx);
+	drm_modeset_acquire_fini(&ctx);
+
+	kfree(save_enabled);
+	return ret;
+}
+
+static const struct drm_fb_helper_funcs intel_fb_helper_funcs = {
+	.initial_config = intel_fb_initial_config,
+	.fb_probe = intelfb_create,
+};
+
+static void intel_fbdev_destroy(struct intel_fbdev *ifbdev)
+{
+	/* We rely on the object-free to release the VMA pinning for
+	 * the info->screen_base mmaping. Leaking the VMA is simpler than
+	 * trying to rectify all the possible error paths leading here.
+	 */
+
+	drm_fb_helper_fini(&ifbdev->helper);
+
+	if (ifbdev->vma) {
+		mutex_lock(&ifbdev->helper.dev->struct_mutex);
+		intel_unpin_fb_vma(ifbdev->vma, ifbdev->vma_flags);
+		mutex_unlock(&ifbdev->helper.dev->struct_mutex);
+	}
+
+	if (ifbdev->fb)
+		drm_framebuffer_remove(&ifbdev->fb->base);
+
+	kfree(ifbdev);
+}
+
+/*
+ * Build an intel_fbdev struct using a BIOS allocated framebuffer, if possible.
+ * The core display code will have read out the current plane configuration,
+ * so we use that to figure out if there's an object for us to use as the
+ * fb, and if so, we re-use it for the fbdev configuration.
+ *
+ * Note we only support a single fb shared across pipes for boot (mostly for
+ * fbcon), so we just find the biggest and use that.
+ */
+static bool intel_fbdev_init_bios(struct drm_device *dev,
+				 struct intel_fbdev *ifbdev)
+{
+	struct intel_framebuffer *fb = NULL;
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+	unsigned int max_size = 0;
+
+	/* Find the largest fb */
+	for_each_crtc(dev, crtc) {
+		struct drm_i915_gem_object *obj =
+			intel_fb_obj(crtc->primary->state->fb);
+		intel_crtc = to_intel_crtc(crtc);
+
+		if (!crtc->state->active || !obj) {
+			DRM_DEBUG_KMS("pipe %c not active or no fb, skipping\n",
+				      pipe_name(intel_crtc->pipe));
+			continue;
+		}
+
+		if (obj->base.size > max_size) {
+			DRM_DEBUG_KMS("found possible fb from plane %c\n",
+				      pipe_name(intel_crtc->pipe));
+			fb = to_intel_framebuffer(crtc->primary->state->fb);
+			max_size = obj->base.size;
+		}
+	}
+
+	if (!fb) {
+		DRM_DEBUG_KMS("no active fbs found, not using BIOS config\n");
+		goto out;
+	}
+
+	/* Now make sure all the pipes will fit into it */
+	for_each_crtc(dev, crtc) {
+		unsigned int cur_size;
+
+		intel_crtc = to_intel_crtc(crtc);
+
+		if (!crtc->state->active) {
+			DRM_DEBUG_KMS("pipe %c not active, skipping\n",
+				      pipe_name(intel_crtc->pipe));
+			continue;
+		}
+
+		DRM_DEBUG_KMS("checking plane %c for BIOS fb\n",
+			      pipe_name(intel_crtc->pipe));
+
+		/*
+		 * See if the plane fb we found above will fit on this
+		 * pipe.  Note we need to use the selected fb's pitch and bpp
+		 * rather than the current pipe's, since they differ.
+		 */
+		cur_size = intel_crtc->config->base.adjusted_mode.crtc_hdisplay;
+		cur_size = cur_size * fb->base.format->cpp[0];
+		if (fb->base.pitches[0] < cur_size) {
+			DRM_DEBUG_KMS("fb not wide enough for plane %c (%d vs %d)\n",
+				      pipe_name(intel_crtc->pipe),
+				      cur_size, fb->base.pitches[0]);
+			fb = NULL;
+			break;
+		}
+
+		cur_size = intel_crtc->config->base.adjusted_mode.crtc_vdisplay;
+		cur_size = intel_fb_align_height(&fb->base, 0, cur_size);
+		cur_size *= fb->base.pitches[0];
+		DRM_DEBUG_KMS("pipe %c area: %dx%d, bpp: %d, size: %d\n",
+			      pipe_name(intel_crtc->pipe),
+			      intel_crtc->config->base.adjusted_mode.crtc_hdisplay,
+			      intel_crtc->config->base.adjusted_mode.crtc_vdisplay,
+			      fb->base.format->cpp[0] * 8,
+			      cur_size);
+
+		if (cur_size > max_size) {
+			DRM_DEBUG_KMS("fb not big enough for plane %c (%d vs %d)\n",
+				      pipe_name(intel_crtc->pipe),
+				      cur_size, max_size);
+			fb = NULL;
+			break;
+		}
+
+		DRM_DEBUG_KMS("fb big enough for plane %c (%d >= %d)\n",
+			      pipe_name(intel_crtc->pipe),
+			      max_size, cur_size);
+	}
+
+	if (!fb) {
+		DRM_DEBUG_KMS("BIOS fb not suitable for all pipes, not using\n");
+		goto out;
+	}
+
+	ifbdev->preferred_bpp = fb->base.format->cpp[0] * 8;
+	ifbdev->fb = fb;
+
+	drm_framebuffer_get(&ifbdev->fb->base);
+
+	/* Final pass to check if any active pipes don't have fbs */
+	for_each_crtc(dev, crtc) {
+		intel_crtc = to_intel_crtc(crtc);
+
+		if (!crtc->state->active)
+			continue;
+
+		WARN(!crtc->primary->state->fb,
+		     "re-used BIOS config but lost an fb on crtc %d\n",
+		     crtc->base.id);
+	}
+
+
+	DRM_DEBUG_KMS("using BIOS fb for initial console\n");
+	return true;
+
+out:
+
+	return false;
+}
+
+static void intel_fbdev_suspend_worker(struct work_struct *work)
+{
+	intel_fbdev_set_suspend(&container_of(work,
+					      struct drm_i915_private,
+					      fbdev_suspend_work)->drm,
+				FBINFO_STATE_RUNNING,
+				true);
+}
+
+int intel_fbdev_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_fbdev *ifbdev;
+	int ret;
+
+	if (WARN_ON(INTEL_INFO(dev_priv)->num_pipes == 0))
+		return -ENODEV;
+
+	ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
+	if (ifbdev == NULL)
+		return -ENOMEM;
+
+	mutex_init(&ifbdev->hpd_lock);
+	drm_fb_helper_prepare(dev, &ifbdev->helper, &intel_fb_helper_funcs);
+
+	if (!intel_fbdev_init_bios(dev, ifbdev))
+		ifbdev->preferred_bpp = 32;
+
+	ret = drm_fb_helper_init(dev, &ifbdev->helper, 4);
+	if (ret) {
+		kfree(ifbdev);
+		return ret;
+	}
+
+	dev_priv->fbdev = ifbdev;
+	INIT_WORK(&dev_priv->fbdev_suspend_work, intel_fbdev_suspend_worker);
+
+	drm_fb_helper_single_add_all_connectors(&ifbdev->helper);
+
+	return 0;
+}
+
+static void intel_fbdev_initial_config(void *data, async_cookie_t cookie)
+{
+	struct intel_fbdev *ifbdev = data;
+
+	/* Due to peculiar init order wrt to hpd handling this is separate. */
+	if (drm_fb_helper_initial_config(&ifbdev->helper,
+					 ifbdev->preferred_bpp))
+		intel_fbdev_unregister(to_i915(ifbdev->helper.dev));
+}
+
+void intel_fbdev_initial_config_async(struct drm_device *dev)
+{
+	struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
+
+	if (!ifbdev)
+		return;
+
+	ifbdev->cookie = async_schedule(intel_fbdev_initial_config, ifbdev);
+}
+
+static void intel_fbdev_sync(struct intel_fbdev *ifbdev)
+{
+	if (!ifbdev->cookie)
+		return;
+
+	/* Only serialises with all preceding async calls, hence +1 */
+	async_synchronize_cookie(ifbdev->cookie + 1);
+	ifbdev->cookie = 0;
+}
+
+void intel_fbdev_unregister(struct drm_i915_private *dev_priv)
+{
+	struct intel_fbdev *ifbdev = dev_priv->fbdev;
+
+	if (!ifbdev)
+		return;
+
+	cancel_work_sync(&dev_priv->fbdev_suspend_work);
+	if (!current_is_async())
+		intel_fbdev_sync(ifbdev);
+
+	drm_fb_helper_unregister_fbi(&ifbdev->helper);
+}
+
+void intel_fbdev_fini(struct drm_i915_private *dev_priv)
+{
+	struct intel_fbdev *ifbdev = fetch_and_zero(&dev_priv->fbdev);
+
+	if (!ifbdev)
+		return;
+
+	intel_fbdev_destroy(ifbdev);
+}
+
+/* Suspends/resumes fbdev processing of incoming HPD events. When resuming HPD
+ * processing, fbdev will perform a full connector reprobe if a hotplug event
+ * was received while HPD was suspended.
+ */
+static void intel_fbdev_hpd_set_suspend(struct intel_fbdev *ifbdev, int state)
+{
+	bool send_hpd = false;
+
+	mutex_lock(&ifbdev->hpd_lock);
+	ifbdev->hpd_suspended = state == FBINFO_STATE_SUSPENDED;
+	send_hpd = !ifbdev->hpd_suspended && ifbdev->hpd_waiting;
+	ifbdev->hpd_waiting = false;
+	mutex_unlock(&ifbdev->hpd_lock);
+
+	if (send_hpd) {
+		DRM_DEBUG_KMS("Handling delayed fbcon HPD event\n");
+		drm_fb_helper_hotplug_event(&ifbdev->helper);
+	}
+}
+
+void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_fbdev *ifbdev = dev_priv->fbdev;
+	struct fb_info *info;
+
+	if (!ifbdev || !ifbdev->vma)
+		return;
+
+	info = ifbdev->helper.fbdev;
+
+	if (synchronous) {
+		/* Flush any pending work to turn the console on, and then
+		 * wait to turn it off. It must be synchronous as we are
+		 * about to suspend or unload the driver.
+		 *
+		 * Note that from within the work-handler, we cannot flush
+		 * ourselves, so only flush outstanding work upon suspend!
+		 */
+		if (state != FBINFO_STATE_RUNNING)
+			flush_work(&dev_priv->fbdev_suspend_work);
+
+		console_lock();
+	} else {
+		/*
+		 * The console lock can be pretty contented on resume due
+		 * to all the printk activity.  Try to keep it out of the hot
+		 * path of resume if possible.
+		 */
+		WARN_ON(state != FBINFO_STATE_RUNNING);
+		if (!console_trylock()) {
+			/* Don't block our own workqueue as this can
+			 * be run in parallel with other i915.ko tasks.
+			 */
+			schedule_work(&dev_priv->fbdev_suspend_work);
+			return;
+		}
+	}
+
+	/* On resume from hibernation: If the object is shmemfs backed, it has
+	 * been restored from swap. If the object is stolen however, it will be
+	 * full of whatever garbage was left in there.
+	 */
+	if (state == FBINFO_STATE_RUNNING &&
+	    intel_fb_obj(&ifbdev->fb->base)->stolen)
+		memset_io(info->screen_base, 0, info->screen_size);
+
+	drm_fb_helper_set_suspend(&ifbdev->helper, state);
+	console_unlock();
+
+	intel_fbdev_hpd_set_suspend(ifbdev, state);
+}
+
+void intel_fbdev_output_poll_changed(struct drm_device *dev)
+{
+	struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
+	bool send_hpd;
+
+	if (!ifbdev)
+		return;
+
+	intel_fbdev_sync(ifbdev);
+
+	mutex_lock(&ifbdev->hpd_lock);
+	send_hpd = !ifbdev->hpd_suspended;
+	ifbdev->hpd_waiting = true;
+	mutex_unlock(&ifbdev->hpd_lock);
+
+	if (send_hpd && (ifbdev->vma || ifbdev->helper.deferred_setup))
+		drm_fb_helper_hotplug_event(&ifbdev->helper);
+}
+
+void intel_fbdev_restore_mode(struct drm_device *dev)
+{
+	struct intel_fbdev *ifbdev = to_i915(dev)->fbdev;
+
+	if (!ifbdev)
+		return;
+
+	intel_fbdev_sync(ifbdev);
+	if (!ifbdev->vma)
+		return;
+
+	if (drm_fb_helper_restore_fbdev_mode_unlocked(&ifbdev->helper) == 0)
+		intel_fbdev_invalidate(ifbdev);
+}